Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Journal of Semiconductors

Fiber coupled high count-rate single-photon generated from InAs quantum dots

Yao Chen, Shulun Li, Xiangjun Shang, Xiangbin Su, Huiming Hao, Jiaxin Shen, Yu Zhang, Haiqiao Ni, Ying Ding, Zhichuan Niu

Published Jul 1, 2021• 6 citations
Publisher

Abstract

Abstract In this work, we achieve high count-rate single-photon output in single-mode (SM) optical fiber. Epitaxial and dilute InAs/GaAs quantum dots (QDs) are embedded in a GaAs/AlGaAs distributed Bragg reflector (DBR) with a micro-pillar cavity, so as to improve their light emission extraction in the vertical direction, thereby enhancing the optical SM fiber’s collection capability (numerical aperture: 0.13). By tuning the temperature precisely to make the quantum dot exciton emission resonant to the micro-pillar cavity mode (Q ~ 1800), we achieve a fiber-output single-photon count rate as high as 4.73 × 106 counts per second, with the second-order auto-correlation g 2(0) remaining at 0.08.

DOI
10.1088/1674-4926/42/7/072901

Related papers

Source of Indistinguishable Single Photons Based on Epitaxial InAs/GaAs Quantum Dots for Integration in Quantum Computing Schemes

A. I. Galimov, Maxim V. Rakhlin, Grigorii V. Klimko +5 more

The characteristics of single photons emitted by columnar microstructures based on epitaxial microcavity heterostructures with distributed Bragg reflectors, which include self-organized InAs/GaAs quantum dots and have a comparatively low Q factor in the range of 2000–3000, have been studied. It has been shown that a state with a given spin configuration—exciton with a certain polarization or trion—can be initialized in a single quantum dot under the coherent resonant linearly polarized optical pumping by a π pulse. The measurement of two-photon interference by the Hong–Ou–Mandel scheme has demonstrated that the degree of indistinguishability of successively emitted single photons is 97 and 93% at a time delay of 2 and 250 ns, respectively. Prospects of application of such sources in optical quantum computing schemes have been discussed.

Journal of Experimental and Theoretical Physics Letters•Feb 1, 2021•16 citations

Telecom C-band single-photon sources with a semiconductor-dielectric microresonator

Yuriy Serov, Aidar Galimov, Sergey Sorokin +19 more

Secure communications with quantum key distribution over fiber-optic links is one of the few recognized applications of quantum physics at the level of individual quanta -- single C-band photons. Currently, the widely used sources of such photons are highly attenuated laser pulses, featured by a low probability of single photon occurrence. Here, we present an efficient source with an InAs/GaAs quantum dot on a metamorphic buffer layer inside a micropillar-shaped microcavity. The key innovation is the use of different semiconductor and dielectric materials to form the lower (GaAs/AlGaAs) and upper (Si/SiO$_2$) Bragg reflectors. Compatibility of these materials in a monolithic source is achieved by depositing a small amount of Si/SiO$_2$ pairs on an incomplete micropillar made from a coherent heterostructure grown by molecular beam epitaxy. This design enables resonant excitation with $π$-pulses and generation of polarized photons with a record-breaking end-to-end efficiency of 11%.

cond-mat.mes-hallCross-listedarXiv:2604.06869•Apr 9, 2026

A stand-alone fiber-coupled single-photon source

Alexander Schlehahn, Sarah Fischbach, Ronny Schmidt +5 more

Abstract In this work, we present a stand-alone and fiber-coupled quantum-light source. The plug-and-play device is based on an optically driven quantum dot delivering single photons via an optical fiber. The quantum dot is deterministically integrated in a monolithic microlens which is precisely coupled to the core of an optical fiber via active optical alignment and epoxide adhesive bonding. The rigidly coupled fiber-emitter assembly is integrated in a compact Stirling cryocooler with a base temperature of 35 K. We benchmark our practical quantum device via photon auto-correlation measurements revealing g(2)(0) = 0.07 ± 0.05 under continuous-wave excitation and we demonstrate triggered non-classical light at a repetition rate of 80 MHz. The long-term stability of our quantum light source is evaluated by endurance tests showing that the fiber-coupled quantum dot emission is stable within 4% over several successive cool-down/warm-up cycles. Additionally, we demonstrate non-classical photon emission for a user-intervention-free 100-hour test run and stable single-photon count rates up to 11.7 kHz with a standard deviation of 4%.

arXiv:1703.10536•Scientific Reports•Jan 16, 2018•99 citations

Efficient generation of indistinguishable single photons on-demand at telecom wavelengths

Je‐Hyung Kim, Tao Cai, Christopher J. K. Richardson +2 more

Highly efficient single photon sources are important building blocks for optical quantum information processing. For practical use and long-distance quantum communication, single photons should have fiber-compatible telecom wavelengths. In addition, most quantum communication applications require high degree of indistinguishability of single photons, such that they exhibit interference on a beam splitter. However, deterministic generation of indistinguishable single photons with high brightness remains a challenging problem in particular at telecom wavelengths. We demonstrate a telecom wavelength source of indistinguishable single photons using an InAs/InP quantum dot in a nanophotonic cavity. To obtain the efficient single quantum dot emission, we employ the higher order mode in L3 photonic crystal cavity that shows a nearly Gaussian transverse mode profile and results in out-coupling efficiency exceeding 46 {\\%} and unusual bright single quantum dot emission exceeding 1.5 million counts per second at a detector. We also observe Purcell enhanced spontaneous emission rate as large as 4 and high linear polarization ratio of 0.96 for the coupled dots. Using this source, we generate high purity single photons at 1.3 ??m wavelength and demonstrate the indistinguishable nature of the emission using a two-photon interference measurement.

Bulletin of the American Physical Society•Mar 17, 2016•0 citations

InP-based single-photon sources operating at telecom C-band with increased extraction efficiency

Anna Musiał, Monika Mikulicz, Paweł Mrowiński +7 more

In this work, we demonstrate a triggered single-photon source operating at the telecom C-band with photon extraction efficiency exceeding any reported values in this range. The non-classical light emission with low probability of the multiphoton events is realized with single InAs quantum dots (QDs) grown by molecular beam epitaxy and embedded directly in an InP matrix. Low QD spatial density on the order of 5 × 108 cm−2 to ∼2 × 109 cm−2 and symmetric shape of these nanostructures together with spectral range of emission make them relevant for quantum communication applications. The engineering of extraction efficiency is realized by combining a bottom distributed Bragg reflector consisting of 25 pairs of InP/In0.53Ga0.37Al0.1 As layers and cylindrical photonic confinement structures. Realization of such a technologically non-demanding approach even in a non-deterministic fashion results in photon extraction efficiency of (13.3 ± 2) % into 0.4 numerical aperture detection optics at approximately 1560 nm emission wavelength, i.e., close to the center of the telecom C-band.

arXiv:2102.00450•Applied Physics Letters•May 31, 2021•36 citations

1.3 μm on-demand single photon source for fibre systems

M. B. Ward, O. Z. Karimov, D. C. Unitt +6 more

We demonstrate the first on-demand single photon source at 1.3 m. The source is based on an InAs quantum dot embedded within a micro-pillar cavity structure. Correlation measurements demonstrate strong suppression of multi-photon emission.

European Quantum Electronics Conference (EQEC)•Jan 18, 2006•0 citations
Abstract In this work, we achieve high count-rate single-photon output in single-mode (SM) optical fiber. Epitaxial and dilute InAs/GaAs quantum dots (QDs) are embedded in a GaAs/AlGaAs distributed Bragg reflector (DBR) with a micro-pillar cavity, so as to improve their light emission extraction in the vertical direction, thereby enhancing the optical SM fiber’s collection capability (numerical aperture: 0.13). By tuning the temperature precisely to make the quantum dot exciton emission resonant to the micro-pillar cavity mode (Q ~ 1800), we achieve a fiber-output single-photon count rate as high as 4.73 × 106 counts per second, with the second-order auto-correlation g 2(0) remaining at 0.08.
The characteristics of single photons emitted by columnar microstructures based on epitaxial microcavity heterostructures with distributed Bragg reflectors, which include self-organized InAs/GaAs quantum dots and have a comparatively low Q factor in the range of 2000–3000, have been studied. It has been shown that a state with a given spin configuration—exciton with a certain polarization or trion—can be initialized in a single quantum dot under the coherent resonant linearly polarized optical pumping by a π pulse. The measurement of two-photon interference by the Hong–Ou–Mandel scheme has demonstrated that the degree of indistinguishability of successively emitted single photons is 97 and 93% at a time delay of 2 and 250 ns, respectively. Prospects of application of such sources in optical quantum computing schemes have been discussed.
Secure communications with quantum key distribution over fiber-optic links is one of the few recognized applications of quantum physics at the level of individual quanta -- single C-band photons. Currently, the widely used sources of such photons are highly attenuated laser pulses, featured by a low probability of single photon occurrence. Here, we present an efficient source with an InAs/GaAs quantum dot on a metamorphic buffer layer inside a micropillar-shaped microcavity. The key innovation is the use of different semiconductor and dielectric materials to form the lower (GaAs/AlGaAs) and upper (Si/SiO2_22​) Bragg reflectors. Compatibility of these materials in a monolithic source is achieved by depositing a small amount of Si/SiO2_22​ pairs on an incomplete micropillar made from a coherent heterostructure grown by molecular beam epitaxy. This design enables resonant excitation with πππ-pulses and generation of polarized photons with a record-breaking end-to-end efficiency of 11%.
Abstract In this work, we present a stand-alone and fiber-coupled quantum-light source. The plug-and-play device is based on an optically driven quantum dot delivering single photons via an optical fiber. The quantum dot is deterministically integrated in a monolithic microlens which is precisely coupled to the core of an optical fiber via active optical alignment and epoxide adhesive bonding. The rigidly coupled fiber-emitter assembly is integrated in a compact Stirling cryocooler with a base temperature of 35 K. We benchmark our practical quantum device via photon auto-correlation measurements revealing g(2)(0) = 0.07 ± 0.05 under continuous-wave excitation and we demonstrate triggered non-classical light at a repetition rate of 80 MHz. The long-term stability of our quantum light source is evaluated by endurance tests showing that the fiber-coupled quantum dot emission is stable within 4% over several successive cool-down/warm-up cycles. Additionally, we demonstrate non-classical photon emission for a user-intervention-free 100-hour test run and stable single-photon count rates up to 11.7 kHz with a standard deviation of 4%.
Highly efficient single photon sources are important building blocks for optical quantum information processing. For practical use and long-distance quantum communication, single photons should have fiber-compatible telecom wavelengths. In addition, most quantum communication applications require high degree of indistinguishability of single photons, such that they exhibit interference on a beam splitter. However, deterministic generation of indistinguishable single photons with high brightness remains a challenging problem in particular at telecom wavelengths. We demonstrate a telecom wavelength source of indistinguishable single photons using an InAs/InP quantum dot in a nanophotonic cavity. To obtain the efficient single quantum dot emission, we employ the higher order mode in L3 photonic crystal cavity that shows a nearly Gaussian transverse mode profile and results in out-coupling efficiency exceeding 46 {\\%} and unusual bright single quantum dot emission exceeding 1.5 million counts per second at a detector. We also observe Purcell enhanced spontaneous emission rate as large as 4 and high linear polarization ratio of 0.96 for the coupled dots. Using this source, we generate high purity single photons at 1.3 ??m wavelength and demonstrate the indistinguishable nature of the emission using a two-photon interference measurement.
In this work, we demonstrate a triggered single-photon source operating at the telecom C-band with photon extraction efficiency exceeding any reported values in this range. The non-classical light emission with low probability of the multiphoton events is realized with single InAs quantum dots (QDs) grown by molecular beam epitaxy and embedded directly in an InP matrix. Low QD spatial density on the order of 5 × 108 cm−2 to ∼2 × 109 cm−2 and symmetric shape of these nanostructures together with spectral range of emission make them relevant for quantum communication applications. The engineering of extraction efficiency is realized by combining a bottom distributed Bragg reflector consisting of 25 pairs of InP/In0.53Ga0.37Al0.1 As layers and cylindrical photonic confinement structures. Realization of such a technologically non-demanding approach even in a non-deterministic fashion results in photon extraction efficiency of (13.3 ± 2) % into 0.4 numerical aperture detection optics at approximately 1560 nm emission wavelength, i.e., close to the center of the telecom C-band.