Cambridge University Press eBooks

The single-mode laser

L. Mandeļ, E. Wolf

Published Sep 29, 1995• 0 citations

Abstract

Introduction The idea of making use of the phenomenon of stimulated emission from an atom or molecule for amplification of the electromagnetic field, and then combining the amplifier with a resonator to make an oscillator, is due to Townes and his co-workers (Gordon, Zeiger and Townes, 1954, 1955) and independently to Basov and Prokhorov (1954, 1955). The former constructed the first MASER, or microwave amplifier by stimulated emission of radiation . In 1958 Schawlow and Townes proposed an application of the same principle to the optical domain (Schawlow and Townes, 1958), in which a two-mirror Fabry–Perot interferometer serves as the optical resonator and an excited group of atoms as the gain medium. The first LASER, or light amplifier by stimulated emission of radiation , was constructed by Maiman (1960). The gain medium was ruby, which was excited by a bright flash of light from a gas discharge tube, whereupon the laser delivered a short optical pulse. The first continuously operating – or CW – laser was developed by Javan and his co-workers (Javan, Bennett and Herriott, 1961); it made use of a He:Ne gas mixture, that was continuously excited by a discharge, as the gain medium. This type of laser is still widely used today. Since that time many different kinds of laser have been developed, ranging in wavelength from the infrared to the ultraviolet. Some produce light at several different frequencies at once, and some are tunable over a wide range.

DOI: 10.1017/cbo9781139644105.019

Related papers

Concept of Laser

Swapan K. Saha

The theory of stimulated emission was put forwarded by A. Einstein (1917), which predicted that as light passed through a substance it could stimulate the emission of more light. In 1954, this phenomenonwas used by Charles Townes andArthur Schawlow in the construction of a microwave ampliﬁcation by stimulated emission of radiation (maser) using ammonia gas and microwave radiation. Later, this operating principle of maser was put forth to the optical frequencies by them from the Bell Telephone laboratories in 1958, which led to the realization of the device, known as light ampliﬁcation by stimulated emission of radiation (laser; Townes and Schawlow, 1958). A laser is a quantum optical device that produces a nearly monochromatic (single wavelength), and coherent beam of light by exciting atoms to a higher energy level and causing them to radiate their energy in phase.

Jan 14, 20150 citations

Optical Gain and Lasers

Gabriel Laufer

Introduction Previous discussions (see Section 10.4) suggested that stimulated emission can be used to generate optical gain, that is, to amplify radiation. The reader certainly has experience in the amplification of electronic signal. For example, radio receivers capture faint radio waves and turn them into a signal that is powerful enough to drive large speakers. This electronic amplification increases the amplitude of the signal while faithfully preserving its acoustic frequencies and modulation characteristics. Similarly, optical amplification is expected to increase the amplitude of an optical signal while preserving its frequency, its modulation characteristics, and its coherence. The latter requirement is of particular significance for optical radiation, where the coherence of naturally occurring radiation rarely exceeds one micrometer. Lasers are the primary source for coherent radiation. They depend on stimulated emission for amplification and for the generation of coherent radiation (the word laser is the acronym of Light Amplification by Stimulated Emission of Radiation). For amplification, an atomic system that is part of the laser medium must be prepared with a sufficiently large number of particles in the excited state. (The term atomic system is used here to describe all microscopic systems including molecules and free electrons.) Radiation passing through that excited medium encounters multiple events of stimulated emission, each event contributing one photon that is added coherently to the propagating beam. When the number of events of stimulated emission exceed all losses by absorption or scattering, the incident radiation is amplified.

Cambridge University Press eBooksJul 13, 19960 citations

Lasing in Random Media

Hui W. Cao

A photon, unlike an electron, can stimulate an excited atom to emit a second photon into the same electromagnetic mode. This stimulated emission process is the foundation for light amplification and oscillation (i.e., self-generation). Initially, the term LASER referred to Light Amplification by Stimulated Emission of Radiation. Nowadays laser often means Light Oscillation by Stimulated Emission, which should literally be called "LOSER" instead of "LASER." To distinguish the above two devices, the former is called a laser amplifier, the latter a laser oscillator (Siegman 1986). Laser oscillation occurs when the photon generation rate exceeds the photon loss rate in a system. If gain saturation were absent, the photon number in a laser oscillator would diverge in time. In other words, the rate equation for the photon number would acquire an unstable solution above the oscillation threshold. In reality, gain saturation reduces the photon generation rate to the photon loss rate so that the number of photons in the oscillator remains at a finite value.

SPIE eBooksMar 16, 20103 citations

Optical frequency amplifiers

Christophér C. Davis

Introduction When an electromagnetic wave propagates through amedium stimulated emissions increase the intensity of the wave, while absorptions diminish it. The overall intensity will increase if the number of stimulated emissions can be made larger than the number of absorptions. If we can create such a situation then we have built an amplifier that operates through the mechanism of stimulated emission. This laser amplifier , in common with electronic amplifiers, has useful gain only over a particular frequency bandwidth. Its operating frequency range will be determined by the lineshape of the transition, and we expect the frequency width of its useful operating range to be of the same order as the width of the lineshape. It is very important to consider how this frequencywidth is related to the various mechanisms by which transitions between different energy states of a particle are smeared out over a range of frequencies. This line broadening affects in a fundamental way not only the frequency bandwidth of the amplifier, but also its gain. A laser amplifier can be turned into an oscillator by supplying an appropriate amount of positive feedback. The level of oscillation will stabilize because the amplifier saturates. Laser amplifiers fall into two categories, which saturate in different ways. A homogeneously broadened amplifier consists of a number of amplifying particles that are essentially equivalent, whereas an inhomogeneously broadened amplifier contains amplifying particles with a distribution of amplification characteristics. Homogeneous line broadening All energy states, except the lowest energy state of a particle (the ground state) cover a range of possible energies.

Cambridge University Press eBooksMar 20, 20140 citations

STIMULATED EMISSION AND DIPOLE OSCILLATORS

Murray, Iii Sargent

The phenomena which are principally responsible for the interaction of radiation with matter in everyday life are absorption and spontaneous emis sion. Light falling on matter is absorbed, leaving atoms in excited states which spontaneously emit radiation with a spread of frequency inversely proportional to the decay time. The situation is modified when the atomic decay times are sufficiently long and the radiation sufficiently intense, for then radiation may fall on excited atoms, resulting in stimulated emission rather than absorption. We saw in Chap. 2 that this third process was required to obtain the Planck blackbody radiation law in Einstein’s derivation. It is stimulated emission which enables an atomic medium to amplify incident radiation, and therefore is an essential ingredient in light amplifiers and oscillators. In fact, the word LASER is an acronym for Light Amplification by Stimulated Emission of Radiation.

CRC Press eBooksMar 5, 20181 citation

AMMONIA BEAM MASER

Murray, Iii Sargent

To treat the laser in a realistic way, we need the density matrix concepts and formalism given in Chap. 7. This material makes it possible to incorporate dipole phase decays due, for example, to collisions and to treat multimode electric fields in a straightforward way. Nevertheless, it is gratifying to find that we can already determine the field intensity for a simplified model of the ammonia beam maser, the first device of the maser-laser genre. The maser was originally conceived in 1951 by Townes, who noted his thoughts on the back of an envelope during a period of contemplation on a bench in Franklin Park, Washington, DC.T The device was realized experimentally by Gordon, Zeiger, and Townes (1954). In this chapter, we treat the maser along the lines given by Lamb (1960). The analysis is not complicated by atomic (molecular) lifetimes, because they are long compared to the Rabi flopping time, which is the optimal transit time for molecules in the maser cavity. Furthermore, by considering single-mode, steady-state operation, we can assume by energy conservation (1) that the energy given up by the atoms due to stimulated emission is gained by the field, and (2) that this energy flow balances the cavity losses.

CRC Press eBooksMar 5, 20180 citations