Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Quantum nondemotion tracking of a resonator’s phase

Bernard Yurke, D. S. Creywall, Paul Busch, Andrew N. Pargellis

Published May 8, 1994• 0 citations
OpenAlex

Abstract

Resonators driven to self-oscillation by active feedback play an important role in technology. The laser is an example of such a device. Generally, the feedback that sustains self-oscillation is contaminated with amplifier noise, which leads to phase diffusion. Here we show that under suitable conditions phase noise from the feedback amplifier can be evaded, allowing one to track the resonator's phase in a quantum nondemolition manner. In particular, we consider a resonator with a Kerr nonlinearity. The output of the resonator is fed into a linear amplifier, phase shifted, fed through an amplitude limiter, and then fed back into the resonator. Stable operation is achieved, even on portions of the resonance curve for which the resonator would exhibit optical bistability under open-loop conditions. By operating the system at a point on the resonance curve for which the slope of the phase versus frequency is infinite, the long-term phase stability of the oscillator becomes insensitive to the amplifier's output noise. In addition, the amplifier's input-port noise can be evaded by making the coupling between the resonator and the amplifier sufficiently weak.

Related papers

Quantum noise and its evasion in feedback oscillators

Hudson A. Loughlin, Vivishek Sudhir

Feedback oscillators, consisting of an amplifier whose output is partially fed back to its input, provide stable references for standardization and synchronization. Notably, the laser is such an oscillator whose performance can be limited by quantum fluctuations. The resulting frequency instability, quantified by the Schawlow-Townes formula, sets a limit to laser linewidth. Here, we show that the Schawlow-Townes formula applies universally to feedback oscillators beyond lasers. This is because it arises from quantum noise added by the amplifier and out-coupler in the feedback loop. Tracing the precise origin of quantum noise in an oscillator informs techniques to systematically evade it: we show how squeezing and entanglement can enable sub-Schawlow-Townes linewidth feedback oscillators. Our analysis clarifies the quantum limits to the stability of feedback oscillators in general, derives a standard quantum limit (SQL) for all such devices, and quantifies the efficacy of quantum strategies in realizing sub-SQL oscillators.

arXiv:2304.03716•Nature Communications•Nov 4, 2023•7 citations

A quantum ticking self-oscillator using delayed feedback

Yanan Liu, William J. Munro, Jason Twamley

Abstract Self-sustained oscillators (SSOs) is a commonly used method to generate classical clock signals and SSOs using delayed feedback have been developed commercially which possess ultra-low phase noise and drift. Research into the development of quantum self-oscillation, where one can also have a periodic and regular output tick, that can be used to control quantum and classical devices has received much interest and quantum SSOs so far studied suffer from phase diffusion which leads to the smearing out of the quantum oscillator over the entire limit cycle in phase space seriously degrading the system’s ability to perform as a self-oscillation. In this paper, we explore quantum versions of time-delayed SSOs, which has the potentials to develop a ticking quantum clock. We first design a linear quantum SSO which exhibits perfect oscillation without phase diffusion. We then explore a nonlinear delayed quantum SSO but find it exhibits dephasing similar to previously studied non-delayed systems.

arXiv:2307.14567•New Journal of Physics•Nov 29, 2023•0 citations

Quantum noise reduction in singly resonant optical devices

C. Cabrillo, J. L. Roldán, Garcia-Fernandez, P.

Quantum noise in a model of singly resonant frequency doubling including phase mismatch and driving in the harmonic mode is analyzed. The general formulae about the fixed points and their stability as well as the squeezing spectra calculated linearizing around such points are given. The use of a nonlinear normalization allows to disentangle in the spectra the dynamic response of the system from the contributions of the various noisy inputs. A general ``reference'' model for one-mode systems is developed in which the dynamic aspects of the problem are not contaminated by static contributions from the noisy inputs. The physical insight gained permits the elaboration of general criteria to optimize the noise suppression performance. With respect to the squeezing in the fundamental mode the optimum working point is located near the first turning point of the dispersive bistability induced by cascading of the second order nonlinear response. The nonlinearities induced by conventional crystals appear enough to reach it being the squeezing ultimately limited by the escape efficiency of the cavity. In the case of the harmonic mode both, finite phase mismatch and/or harmonic mode driving allow for an optimum dynamic response of the system something not possible in the standard phase matched Second Harmonic Generation. The squeezing is then limited by the losses in the harmonic mode, allowing for very high degrees of squeezing because of the non-resonant nature of the mode. This opens the possibility of very high performances using artificial materials with resonantly enhanced nonlinearities. It is also shown how it is possible to substantially increase the noise reduction and at the same time to more than double the output power for parameters corresponding to reported experiments.

arXiv:quant-ph/9810020•Oct 7, 1998•0 citations

Suppressing Cavity Frequency Noise Using a Kerr Nonlinearity

J. P. van Soest, S. Meilof, G. L. Bhai +3 more

Resonance-frequency fluctuations can limit the sensitivity and stability of superconducting microwave cavities used for qubit readout, optomechanical displacement sensing, and magnetic flux detection. Here, we demonstrate the suppression of resonance-frequency fluctuations by locking a noisy nonlinear superconducting microwave cavity to a strong pump tone. The Kerr nonlinearity of this system, whereby the resonance frequency depends on the intracavity field amplitude, gives rise to an intrinsic feedback mechanism that enables passive stabilization without active external feedback. Using two-tone spectroscopy, we experimentally characterize the intrinsic nonlinear feedback mechanism and investigate its temporal stability through Allan deviation analysis. The frequency fluctuations of the locked cavity mode are reduced by nearly two orders of magnitude, reaching the $1/f$ noise floor, without continuous frequency tracking or active control. Kerr locking provides a general approach for self-stabilizing nonlinear microwave resonators by suppressing low-frequency cavity noise while preserving sensitivity to signals outside the locking bandwidth. This approach may benefit a broad range of systems, including SQUID-based resonators, optomechanical devices, and parametric amplifiers.

quant-pharXiv:2608.03440•Aug 5, 2026•0 citations

Quantum Nondemolition Schemes using Second Order Nonlinearities

Robert M. Shelby, M. D. Levenson

Conventional devices for measuring the amplitude of a light wave absorb the light, thus destroying it. Recently, quantum nondemolition (QND) methods based on the optical Kerr effect have been shown capable of measuring optical amplitude fluctuations with near quantum-limited sensitivity.1 In these experiments, amplitude fluctuations of a signal beam are transferred to the phase fluctuation quadrature of a probe beam which co-propagates with the signal beam, by the intensity-dependent refractive index, without absorption of the signal beam. A pure Kerr nonlinearity can cause only phase modulation of the light wave, and the amplitude of the signal wave is preserved. Such methods should more properly be called back-action evading measurement schemes since the quantity being measured is not perturbed by the back-action that quantum mechanics requires for any measurement. The signal-to-noise ratio achieved in these experiments was limited by the small magnitude of the Kerr nonlinearity relative to the excess phase noise imposed on the probe beam by thermal light scattering processes in the glass fibers that were employed.

•Jul 18, 1988•0 citations

Theory of phase-mixing amplification in an optomechanical system

Caspar F. Ockeloen-Korppi, Tero Tapio Heikkilä, Mika A. Sillanpää +1 more

Abstract The investigation of the ultimate limits imposed by quantum mechanics on amplification represents an important topic both on a fundamental level and from the perspective of potential applications. We discuss here a novel regime for bosonic linear amplifiers—beside phase-insensitive and phase-sensitive amplification—which we term here phase-mixing amplification. Furthermore, we show that phase-mixing amplification can be realised in a cavity optomechanical setup, constituted by a mechanical resonator which is dispersively coupled to an optomechanical cavity asymmetrically driven around both mechanical sidebands. While, in general, this amplifier is phase-mixing, for a suitable choice of parameters, the amplifier proposed here operates as a phase-sensitive amplifier. We show that both configurations allow amplification with an added noise below the quantum limit of (phase-insensitive) amplification in a parameter range compatible with current experiments in microwave circuit optomechanics. In particular, we show that introducing phase-mixing amplification typically allows for a significant reduction of the added noise.

arXiv:1610.07579•Quantum Science and Technology•Jul 21, 2017•9 citations
Resonators driven to self-oscillation by active feedback play an important role in technology. The laser is an example of such a device. Generally, the feedback that sustains self-oscillation is contaminated with amplifier noise, which leads to phase diffusion. Here we show that under suitable conditions phase noise from the feedback amplifier can be evaded, allowing one to track the resonator's phase in a quantum nondemolition manner. In particular, we consider a resonator with a Kerr nonlinearity. The output of the resonator is fed into a linear amplifier, phase shifted, fed through an amplitude limiter, and then fed back into the resonator. Stable operation is achieved, even on portions of the resonance curve for which the resonator would exhibit optical bistability under open-loop conditions. By operating the system at a point on the resonance curve for which the slope of the phase versus frequency is infinite, the long-term phase stability of the oscillator becomes insensitive to the amplifier's output noise. In addition, the amplifier's input-port noise can be evaded by making the coupling between the resonator and the amplifier sufficiently weak.
Feedback oscillators, consisting of an amplifier whose output is partially fed back to its input, provide stable references for standardization and synchronization. Notably, the laser is such an oscillator whose performance can be limited by quantum fluctuations. The resulting frequency instability, quantified by the Schawlow-Townes formula, sets a limit to laser linewidth. Here, we show that the Schawlow-Townes formula applies universally to feedback oscillators beyond lasers. This is because it arises from quantum noise added by the amplifier and out-coupler in the feedback loop. Tracing the precise origin of quantum noise in an oscillator informs techniques to systematically evade it: we show how squeezing and entanglement can enable sub-Schawlow-Townes linewidth feedback oscillators. Our analysis clarifies the quantum limits to the stability of feedback oscillators in general, derives a standard quantum limit (SQL) for all such devices, and quantifies the efficacy of quantum strategies in realizing sub-SQL oscillators.
Abstract Self-sustained oscillators (SSOs) is a commonly used method to generate classical clock signals and SSOs using delayed feedback have been developed commercially which possess ultra-low phase noise and drift. Research into the development of quantum self-oscillation, where one can also have a periodic and regular output tick, that can be used to control quantum and classical devices has received much interest and quantum SSOs so far studied suffer from phase diffusion which leads to the smearing out of the quantum oscillator over the entire limit cycle in phase space seriously degrading the system’s ability to perform as a self-oscillation. In this paper, we explore quantum versions of time-delayed SSOs, which has the potentials to develop a ticking quantum clock. We first design a linear quantum SSO which exhibits perfect oscillation without phase diffusion. We then explore a nonlinear delayed quantum SSO but find it exhibits dephasing similar to previously studied non-delayed systems.
Quantum noise in a model of singly resonant frequency doubling including phase mismatch and driving in the harmonic mode is analyzed. The general formulae about the fixed points and their stability as well as the squeezing spectra calculated linearizing around such points are given. The use of a nonlinear normalization allows to disentangle in the spectra the dynamic response of the system from the contributions of the various noisy inputs. A general ``reference'' model for one-mode systems is developed in which the dynamic aspects of the problem are not contaminated by static contributions from the noisy inputs. The physical insight gained permits the elaboration of general criteria to optimize the noise suppression performance. With respect to the squeezing in the fundamental mode the optimum working point is located near the first turning point of the dispersive bistability induced by cascading of the second order nonlinear response. The nonlinearities induced by conventional crystals appear enough to reach it being the squeezing ultimately limited by the escape efficiency of the cavity. In the case of the harmonic mode both, finite phase mismatch and/or harmonic mode driving allow for an optimum dynamic response of the system something not possible in the standard phase matched Second Harmonic Generation. The squeezing is then limited by the losses in the harmonic mode, allowing for very high degrees of squeezing because of the non-resonant nature of the mode. This opens the possibility of very high performances using artificial materials with resonantly enhanced nonlinearities. It is also shown how it is possible to substantially increase the noise reduction and at the same time to more than double the output power for parameters corresponding to reported experiments.
Resonance-frequency fluctuations can limit the sensitivity and stability of superconducting microwave cavities used for qubit readout, optomechanical displacement sensing, and magnetic flux detection. Here, we demonstrate the suppression of resonance-frequency fluctuations by locking a noisy nonlinear superconducting microwave cavity to a strong pump tone. The Kerr nonlinearity of this system, whereby the resonance frequency depends on the intracavity field amplitude, gives rise to an intrinsic feedback mechanism that enables passive stabilization without active external feedback. Using two-tone spectroscopy, we experimentally characterize the intrinsic nonlinear feedback mechanism and investigate its temporal stability through Allan deviation analysis. The frequency fluctuations of the locked cavity mode are reduced by nearly two orders of magnitude, reaching the 1/f1/f1/f noise floor, without continuous frequency tracking or active control. Kerr locking provides a general approach for self-stabilizing nonlinear microwave resonators by suppressing low-frequency cavity noise while preserving sensitivity to signals outside the locking bandwidth. This approach may benefit a broad range of systems, including SQUID-based resonators, optomechanical devices, and parametric amplifiers.
Conventional devices for measuring the amplitude of a light wave absorb the light, thus destroying it. Recently, quantum nondemolition (QND) methods based on the optical Kerr effect have been shown capable of measuring optical amplitude fluctuations with near quantum-limited sensitivity.1 In these experiments, amplitude fluctuations of a signal beam are transferred to the phase fluctuation quadrature of a probe beam which co-propagates with the signal beam, by the intensity-dependent refractive index, without absorption of the signal beam. A pure Kerr nonlinearity can cause only phase modulation of the light wave, and the amplitude of the signal wave is preserved. Such methods should more properly be called back-action evading measurement schemes since the quantity being measured is not perturbed by the back-action that quantum mechanics requires for any measurement. The signal-to-noise ratio achieved in these experiments was limited by the small magnitude of the Kerr nonlinearity relative to the excess phase noise imposed on the probe beam by thermal light scattering processes in the glass fibers that were employed.
Abstract The investigation of the ultimate limits imposed by quantum mechanics on amplification represents an important topic both on a fundamental level and from the perspective of potential applications. We discuss here a novel regime for bosonic linear amplifiers—beside phase-insensitive and phase-sensitive amplification—which we term here phase-mixing amplification. Furthermore, we show that phase-mixing amplification can be realised in a cavity optomechanical setup, constituted by a mechanical resonator which is dispersively coupled to an optomechanical cavity asymmetrically driven around both mechanical sidebands. While, in general, this amplifier is phase-mixing, for a suitable choice of parameters, the amplifier proposed here operates as a phase-sensitive amplifier. We show that both configurations allow amplification with an added noise below the quantum limit of (phase-insensitive) amplification in a parameter range compatible with current experiments in microwave circuit optomechanics. In particular, we show that introducing phase-mixing amplification typically allows for a significant reduction of the added noise.