Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Room-temperature wavelength-tunable amplitude-squeezed light from a quantum-well laser

MJ Freeman, H. Wang, Duncan G. Steel, Ronald A. Craig, Don R. Scifres

Published May 8, 1994• 0 citations
OpenAlex

Abstract

The generation of light with amplitude-noise levels below the standard quantum limit (SQL) by constant-current operation of light-emitting and semiconductor laser diodes has been well established.1 Nearly all of this work, however, has been conducted with the light source cooled to cryogenic temperatures. At room temperature, the highest observed squeezing levels were 0.6 dB for light-emitting diodes and 0.2 dB for laser diodes.2 We presently report up to 1.8 dB of squeezing from a commercially available index-guided quantum-well laser (SDL-5410-C) operated at room temperature. Although cross-gain saturation can lead to amplitude squeezing of the total number of photons emitted by a multimode semiconductor laser in the limit of fast intraband scattering and the absence of wavelength-dependent loss,3 we found that it was necessary to suppress the >100 near-threshold longitudinal side modes of the laser to obtain squeezing at room temperature. This was accomplished either by using optical feedback from a grating in an external cavity configuration or by injection-locking the laser to a single-frequency laser. Both of these techniques allow the output wavelength of the laser to be named and thus the squeezing level as a function of wavelength to be studied.

Related papers

Wavelength-tunable amplitude-squeezed light from a room-temperature quantum-well laser

MJ Freeman, Richard R. Craig, Don R. Scifres +2 more

We have observed amplitude noise levels as much as 1.8 dB below the Standard quantum limit in the light generated by an external-cavity-stabilized index-guided quantum-well laser operating at room temperature. The measured amplitude noise remains more than 1.5 dB below the Standard quantum limit as the lasing wavelength of this system is tuned from 831 to 841 nm.

Optics Letters•Dec 15, 1993•63 citations

Amplitude squeezed light generation in semiconductor diode lasers.

Michael J. Freeman

This dissertation describes a series of measurements that confirmed the existence of amplitude squeezing in a commercially available type of laser diode and makes the critical observation that the primary requirement to obtain squeezing, in addition to sub-Poissonian pumping, is the suppression of longitudinal side modes. Side-mode suppression was achieved using optical feedback from a grating in an external cavity configuration or by injection locking to a single-wavelength master laser. The external cavity setup allowed as much as 1.8 dB of amplitude squeezing to be generated with the laser diode operating at room temperature, and provided a means for tuning the output wavelength over a range in excess of 20 nm. The injection locking approach achieved more than 3.0 dB of squeezing at cryogenic temperatures and made it possible to maintain squeezing in the presence of drive-current modulation signals, facilitating potential applications in precision measurement systems and communications. By identifying some of the noise mechanisms which prevent the observation of amplitude squeezing and establishing that squeezing is a much more robust phenomenon than previous work had indicated, this research has shown that there may be important practical uses for these sources as diode laser technology evolves.

•Jan 1, 1994•0 citations

Generation of Tunable Amplitude-Squeezed Light by Injection Locking of a Laser Diode

Junmin Wang, Lingxiang He, Tiancai Zhang +2 more

Tunable amplitude squeezing around the D 2 line of cesium has been experimentally accomplished at room temperature in a quantum-well laser diode with light injection from a single-mode distributed Bragg-Reflector laser diode. While the master laser frequency is tuned, amplitude squeezing of the output light from the slave laser can be maintained at about 0.9 dB throughout a tunable range of ∼ 1.7 GHz around the cesium D 2 line.

Chinese Physics Letters•Jun 1, 2000•1 citation

Nonclassical amplitude-squeezed light generated by semiconductor quantum well lasers

Daniel C. Kilper, Michael J. Freeman, Duncan G. Steel +2 more

Amplitude-squeezed light has been generated by semiconductor quantum well lasers in numerous optical configurations, at both room and cryogenic temperatures. Various intensity noise sources associated with nonideal laser operation, in particular mode partition and polarization-dependent noise, can introduce intensity fluctuations that limit or remove amplitude squeezing. We discuss amplitude noise reduction in low-temperature free-running and injection-locking laser configurations and room-temperature injection locking and external-cavity laser configurations. Drive-current modulation with a nonclassical SNR improvement is achieved with an injection-locked laser.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Apr 26, 1995•3 citations

Generation of amplitude-squeezed light from a room-temperature Fabry–Perot semiconductor laser

John E. Kitching, Daniele Battesimo Provenzano, Avigail Yariv

Amplitude-squeezed light with intensity fluctuations 29% below the standard quantum limit (SQL) is produced from a pump-suppressed room-temperature semiconductor laser, corresponding to 41% below the SQL after correction for detection efficiency. Excess noise, which degrades the observed squeezing, appears to be associated with the presence of weak longitudinal side modes.

Optics Letters•Dec 15, 1995•11 citations

Room Temperature Generation of Amplitude Squeezed Light from a Semiconductor Laser with Weak Optical Feedback

John E. Kitching, Avigail Yariv, Yaakov Shevy

Amplitude-squeezed states are produced from a room-temperature Fabry-P\'erot quantum-well semiconductor laser using a combination of pump suppression and weak, dispersive optical feedback. Up to 0.9 dB of squeezing is measured using a balanced homodyne detector corresponding to 1.5 dB of squeezing at the output facet of the laser. A comparison of the data to theoretical predictions suggests that the excess noise measured under free-running conditions could be a result of incomplete side-mode suppression in combination with asymmetrical cross-mode nonlinear gain saturation.

Physical Review Letters•Apr 24, 1995•50 citations
The generation of light with amplitude-noise levels below the standard quantum limit (SQL) by constant-current operation of light-emitting and semiconductor laser diodes has been well established.1 Nearly all of this work, however, has been conducted with the light source cooled to cryogenic temperatures. At room temperature, the highest observed squeezing levels were 0.6 dB for light-emitting diodes and 0.2 dB for laser diodes.2 We presently report up to 1.8 dB of squeezing from a commercially available index-guided quantum-well laser (SDL-5410-C) operated at room temperature. Although cross-gain saturation can lead to amplitude squeezing of the total number of photons emitted by a multimode semiconductor laser in the limit of fast intraband scattering and the absence of wavelength-dependent loss,3 we found that it was necessary to suppress the >100 near-threshold longitudinal side modes of the laser to obtain squeezing at room temperature. This was accomplished either by using optical feedback from a grating in an external cavity configuration or by injection-locking the laser to a single-frequency laser. Both of these techniques allow the output wavelength of the laser to be named and thus the squeezing level as a function of wavelength to be studied.
This dissertation describes a series of measurements that confirmed the existence of amplitude squeezing in a commercially available type of laser diode and makes the critical observation that the primary requirement to obtain squeezing, in addition to sub-Poissonian pumping, is the suppression of longitudinal side modes. Side-mode suppression was achieved using optical feedback from a grating in an external cavity configuration or by injection locking to a single-wavelength master laser. The external cavity setup allowed as much as 1.8 dB of amplitude squeezing to be generated with the laser diode operating at room temperature, and provided a means for tuning the output wavelength over a range in excess of 20 nm. The injection locking approach achieved more than 3.0 dB of squeezing at cryogenic temperatures and made it possible to maintain squeezing in the presence of drive-current modulation signals, facilitating potential applications in precision measurement systems and communications. By identifying some of the noise mechanisms which prevent the observation of amplitude squeezing and establishing that squeezing is a much more robust phenomenon than previous work had indicated, this research has shown that there may be important practical uses for these sources as diode laser technology evolves.
Amplitude-squeezed light has been generated by semiconductor quantum well lasers in numerous optical configurations, at both room and cryogenic temperatures. Various intensity noise sources associated with nonideal laser operation, in particular mode partition and polarization-dependent noise, can introduce intensity fluctuations that limit or remove amplitude squeezing. We discuss amplitude noise reduction in low-temperature free-running and injection-locking laser configurations and room-temperature injection locking and external-cavity laser configurations. Drive-current modulation with a nonclassical SNR improvement is achieved with an injection-locked laser.
Amplitude-squeezed states are produced from a room-temperature Fabry-P\'erot quantum-well semiconductor laser using a combination of pump suppression and weak, dispersive optical feedback. Up to 0.9 dB of squeezing is measured using a balanced homodyne detector corresponding to 1.5 dB of squeezing at the output facet of the laser. A comparison of the data to theoretical predictions suggests that the excess noise measured under free-running conditions could be a result of incomplete side-mode suppression in combination with asymmetrical cross-mode nonlinear gain saturation.