The technology exists for preparing and measuring nanoscale mechanical systems at the quantum limit. A nanomechanical system has recently demonstrated the fundamental limit for heat flow through discrete channels. This universal energy transport limit is intimately related to the predicted maximum information rate per channel. I will discuss this measurement and experiments that are under preparation at LPS, using nanomechanical resonators with rf-SET read-out to achieve positive detection limited by the uncertainty principle: the standard quantum limit. This system offers the possibility of implementing advanced measurement strategies, such as quantum non-demolition techniques, to beat this limit. In addition to revealing the fascinating collective quantum behavior of 10^(10) atoms, developing ultra0sensitive position sensors may be important for quantum computing applications such as single electron spin read-out with cantilevers, and provide an understanding of the interaction between delicate quantum systems and real read-out devices.
The technology exists for preparing and measuring nanoscale mechanical systems at the quantum limit. A nanomechanical system has recently demonstrated the fundamental limit for heat flow through discrete channels. This universal energy transport limit is intimately related to the predicted maximum information rate per channel. I will discuss this measurement and experiments that are under preparation at LPS, using nanomechanical resonators with rf-SET read-out to achieve positive detection limited by the uncertainty principle: the standard quantum limit. This system offers the possibility of implementing advanced measurement strategies, such as quantum non-demolition techniques, to beat this limit. In addition to revealing the fascinating collective quantum behavior of 10^(10) atoms, developing ultra0sensitive position sensors may be important for quantum computing applications such as single electron spin read-out with cantilevers, and provide an understanding of the interaction between delicate quantum systems and real read-out devices.
The coupling of nanomechanical resonators to controllable quantum systems represents a growing and promising area of research. Recent advances in this field have brought to astonishing results, such as the initialization of a mechanical resonator into its quantum ground state and even the preparation of non-classical coherent states of motion. These achievements open up appealing scenarios to quantum information technologies and to the exploration of the quantum-classical boundary. From an application perspective, such quantum-mechanical hybrid systems provide a versatile and attractive tool for a variety of precision measurements, like ultra-sensitive detection of force, mass, and displacement. \n \nQuantum control over a mechanical resonator, or, conversely, the prospect of using resonator's motion for probing quantum states, both involve some tight requirements. First of all, the interaction between the mechanics and its quantum partner has to be large on the scale of the decoherence rates of the coupled systems. In most cases, the coupling mechanism has to be activated by engineering the resonator with electrodes, magnets, or mirrors, or by using tailored laser fields. For this reason, the search for a strong coupling typically competes with the requirement of overcoming decoherence effects. In addition, for quantum effects to be observable, strong coupling has to be accompanied by the preparation of zero entropy initial states, for instance by cooling the resonator into its ground state of motion. \n \nThe motivation pursued by this thesis is to contribute to the inspiring field of hybrid systems by walking through each of the aforementioned directions. We in fact demonstrate a promising system in which optically active quantum dots, embedded in fully self-assembled core-shell nanowires, are coupled to the nanowire motion. Mechanical vibrations of the nanowire modulate the quantum dot emission energy over a broad range exceeding 14 meV, by means of deformation potential coupling. In our system, therefore, both the coupling mechanism and the quantum states themselves are intrinsic to the resonator's structure. Besides revealing unusually strong, such a built-in opto-mechanical interaction produces a hybrid system whose inherent coherence is unspoiled by any functionalization or external field and whose fabrication is simpler than top-down techniques. \n \nWe further demonstrate the use of a quantum point contact as a displacement transducer to measure and control the low-temperature thermal motion of a nearby micromechanical cantilever. We show that by including the QPC in a suitable feedback loop, we are able to cool the cantilever's fundamental mechanical mode down to the level of the measurement noise, achieving a squashing of the QPC noise at high gain. Due to its off-board design, our system is particularly versatile and suitable to force-sensing applications. Since the QPC transducer is sensitive to local modifications of the nearby electric field, our approach is in principle compatible with any nanoscale resonator, without requiring any functionalization to activate the coupling. By improving the performance of the QPC as a one-dimensional conductor and the cantilever-QPC capacitive coupling, our system has the potential to achieve quantum-limited displacement resolution and ground state cooling. We then report on some ongoing attempts to overcome the current limitations of our system and couple mechanical motion to different mesoscopic transport devices. \n \nWe remark that our demonstration of an as-grown quantum-dot-in-nanowire hybrid system opens up bright prospects on future experiments, as also testified by the very recent ferment of the scientific community around this topic. We find that the opto-mechanical coupling rate is not far from the nanowire mechanical frequency. This fact makes our system particularly promising for the quantum non-demolition readout of a quantum dot state through a measurement of the nanowire position. On the other hand, we show that the coupling can be further optimized, and the nanowire mechanical heating rate reduced, thus disclosing the captivating perspective of using quantum dots to probe and control the mechanical state of a nanowire. In this context, it would be important to investigate a possible spin-oscillator coupling in our system, given the long coherence time offered by a spin state in a quantum dot. The wide range of control over the quantum dots emission energy and the ability to tune two neighboring dots into resonance pave the way to mechanically induced emitter-emitter coupling. In addition, our monolithic opto-mechanical system constitutes a good candidate for recent proposals of a tripartite hybrid system, which would integrate an optical cavity, a quantum two-level system and a mechanical resonator. The intrinsically strong coupling between the quantum dots and the nanowire motion would enhance the interaction between the mechanics and the cavity field, leading for instance to efficient cooling of the resonator to the ground state. Finally, the quantum dot sensitivity to the nanowire resonant vibration could also support the use of our system as an integrated force probe or as a nanomechanical mass sensor. In other words, the results reported in this dissertation constitute not only a relevant proof-of-principle, moreover they open up intriguing challenges for future research.
Experiments over the past years have demonstrated that it is possible to bring nanomechanical resonators and superconducting qubits close to the quantum regime and to measure their properties with an accuracy close to the Heisenberg uncertainty limit. Therefore, it is just a question of time before we will routinely see true quantum effects in nanomechanical systems. One of the hallmarks of quantum mechanics is the existence of entangled states. We propose a realistic scenario making it possible to detect entanglement of a mechanical resonator and a qubit in a nanoelectromechanical setup. The detection scheme involves only standard current and noise measurements of an atomic point contact coupled to an oscillator and a qubit. This setup could allow for the first observation of entanglement between a continuous and a discrete quantum system in the solid state.
The application of quantum mechanics to macroscopic motion suggests many counterintuitive phenomena. While the quantum nature of the motion of individual atoms and molecules has long been successfully studied, an equivalent demonstration of the motion of a near-macroscopic structure remains a challenge in experimental physics. A nanomechanical resonator is an excellent system for such a study. It typically contains > 10 10 atoms, and it may be modeled in terms of macroscopic parameters such as bulk density and elasticity. Yet it behaves like a simple harmonic oscillator, with mass low enough and resonant frequency high enough for its quantum zero-point motion and single energy quanta to be experimentally accessible. In pursuit of quantum phenomena in a mechanical oscillator, two important goals are to prepare the oscillator in its quantum ground state, and to measure its position with a precision limited by the Heisenberg uncertainty principle. In this work we have demonstrated techniques that advance towards both of these goals. Our system comprises a 30 micron × 170 nm, 2.2 pg, 5.57 MHz nanomechanical resonator capacitively coupled to a 5 GHz superconducting microwave resonator. The microwave resonator and nanomechanical resonator are fabricated together onto a single silicon chip and measured in a dilution refrigerator at temperatures below 150 mK. At these temperatures the coupling of the motion to the thermal environment is very small, resulting in a very high mechanical Q, approaching ∼ 10 6 . By driving with a microwave pump signal, we observed sidebands generated by the mechanical motion and used these to measure the thermal motion of the resonator. Applying a pump tone red-detuned from the microwave resonance, we used the microwave field to damp the mechanical resonator, extracting energy and "cooling" the motion in a manner similar to optical cooling of trapped atoms. Starting from a mode temperature of ∼ 150 mK, we reached ∼ 40 mK by this "backaction cooling" technique, corresponding to an occupation factor only ∼ 150 times above the ground state of motion. We also determined the precision of our device in measurement of position. Quantum mechanics dictates that, in a continuous position measurement, the precision may be no better than the zero-point motion of the resonator. Increasing the coupling of the resonator to detector will eventually result in back-action driving of the motion, adding imprecision and enforcing this limit. We demonstrated that our system is capable of precisions approaching this limit, and identified the primary experimental factors preventing us from reaching it: noise added to the measurement by our amplifier, and excess dissipation appearing in our microwave resonator at high pump powers. Furthermore, by applying both red- and blue-detuned phase-coherent microwave pump signals, we demonstrated back-action evading (BAE) measurement sensitive to only a single quadrature of the motion. By avoiding the back-action driving in the measured quadrature, such a technique has the potential for precisions surpassing the limit of the zero-point motion. With this method, we achieved a measurement precision of ∼ 100 fm, or 4 times the quantum zero-point motion of the mechanical resonator. We found that the measured quadrature is insensitive to back-action driving by at least a factor of 82 relative to the unmeasured quadrature. We also identified a mechanical parametric amplification effect which arises during the BAE measurement. This effect sets limits on the BAE performance but also mechanically preamplifies the motion, resulting in a position resolution 1.3 times the zero-point motion. We discuss how to overcome the experimental limits set by amplifier noise, pump power and parametric amplification. These results serve to define the path forward for demonstrating truly quantum-limited measurement and non-classical states of motion in a nearly-macroscopic object.
For decades, quantum mechanics has been a hugely successful theory for understanding the microscopic world. Despite its seemingly non-physical predictions, such as superposition or cat states, the accuracy of the theory has been verified time and again for microscopic systems composed of single atoms or other quantum particles. Up till now, however, our understanding of how and if these quantum predictions scale to larger systems closer to our everyday perceptions, where we do not see quantum "weirdness", is an open question. One platform to pursue observation of quantum effects in a system composed of large ensembles of atoms rather than single particles is that of nanomechanical resonators. Several schemes have been proposed to observe quantum effects in these systems, eg [1],[41], but a common feature is the requirement that the mechanical resonator be at or near its quantum ground state, which has proved challenging to achieve. In this dissertation, a novel mechanical motion readout scheme using superconducting resonators is presented and shown to allow near quantum limited detection. In any strong measurement of a system, quantum mechanics dictates that the measurement will inherently produce some "back-action" on the measured system. It will be shown that for the measurement system presented, back-action forces can additionally be used to cool a single mode of a mechanical resonator to near its quantum ground state, with the lowest observed occu- pation factor at 3.8 ±1.3 quanta. This is a low enough occupation level that the nanoresonator is in its ground state statistically 21% of the time and opens up the possibility of preforming further quantum experiments. The system investigated in this dissertation is composed of a nanoscale mechanical resonator capacitively coupled to a superconducting coplanar waveguide resonator. The resonators were nanofabricated on a silicon substrate and cooled to low temperature in a dilution refrigerator system. Applying microwave signals to the device and measuring output spectra provided the means to both observe the mechanical motion and produce the back-action forces.
Nanoelectromechanical systems have many potential applications in nanoelec-tronics as well as in fundamental studies of quantum mechanics in mesoscopic sys-tems. Nanoelectromechanical systems have been touted as an extension of micro-electromechanical systems which would operate at higher frequencies and consume far less power due their higher quality factors. Since these systems can be cooled close to their ground states with existing cryogenic techniques, they are useful tools to study the quantum effects like backaction, coherent states and superposition in mesoscopic mechanical systems. Also there have been proposals to use these systems as qubits and buses in quantum computing. In this thesis I discuss the effects of the backaction of a superconducting single electron transistor that measures the position of a radio frequency nanomechanical resonator. One of the novel effects of this backaction is the cooling of the nanome-chanical resonator. The fact that a system can be cooled by merely coupling it to noisy non-equilibrium device is a counterintuitive phenomenon. Although backac-tion effects have been used to produce ultra-cold atoms, our results are the first demonstration of this cooling effect in a mesoscopic system. For a linear continuous position detection scheme, quantum mechanics places a lower limit on the product of position shot noise, Sx, and the backaction force noise, SF, which is given by, SxSF ≥ h̄
The standard mathematical formalism of cavity QED leads us to consider photons as excitations of a quantum harmonic oscillator. Although it is one of the most familiar problems of quantum mechanics, some aspects of the quantum harmonic oscillator remain difficult to visualize, particularly in the rather abstract context of an electromagnetic field. Recently, modern microfabrication and refrigeration techniques have begun to allow the creation of nanoscale mechanical oscillators which can be cooled close to the quantum regime. Despite the extreme physical differences between an electromagnetic cavity and a nanomechanical resonator, both systems may be approximated by the same quantum harmonic oscillator model. However, the conceptual consequences of quantum behavior, and the challenges to physical intuition, are quite different in the two cases. Taking a mechanical point of view therefore allows fresh insight into the quantum harmonic oscillator problem. To illustrate the connection and how it may aid our understanding of light, the mathematical parallelism between an electromagnetic cavity and a mechanical resonator is demonstrated. Current nanomechanics experiments are discussed, and some possible quantum measurements are introduced. Finally, the discrepancies between the predictions of quantum mechanics and our experience of classical vibrating beams are considered, with an emphasis on how nanomechanics may be able to offer a new perspective on the nature of photons.