Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Acta Physica Sinica

The preliminary result of laser-focused Cr atomic deposition for fabricating nanostructure

Shan Ma

Published Jan 1, 2007• 0 citations
OpenAlex

Abstract

The technology of laser-focused atomic deposition can be used to develop the nanostrucrure transfer standard of length.When the frequency of laser standing wave is higher than the resonant frequency of atoms,the atoms will be focused on the wave node of the standing wave.The collimated Cr atoms are focused by a standing-wave laser field as they are deposited on a silicon substrate.Atomic force microscopy measurements shows a spacing of 215nm.

Related papers

Nanostructure fabrication via direct writing with atoms focused in laser fields

Robert E Scholten, Jabez J. McClelland, E. C. Palm +2 more

The techniques of atom optics can be applied during the deposition of atoms onto a surface to produce nanostructures. A laser is used to form a standing wave intensity pattern in front of the substrate. An atom beam, which has been collimated by optical means, is focused onto the substrate by dipole forces from the standing wave pattern so as to deposit a series of lines spaced by half the laser wavelength. We describe the fabrication of a Cr nanograting formed using this new technique. The experimental arrangement for deposition and the optical collimation of the atom beam are described. Scanning electron microscopy (SEM) and atomic force microscopy (AFM) images of the resulting nanostructures are presented.

Journal of Vacuum Science & Technology B Microelectronics and Nanometer Structures Processing Measurement and Phenomena•May 1, 1994•12 citations

Laser-Focused Atomic Deposition

Jabez J. McClelland, Robert E Scholten, E. C. Palm +1 more

The ability to fabricate nanometer-sized structures that are stable in air has the potential to contribute significantly to the advancement of new nanotechnologies and our understanding of nanoscale systems. Laser light can be used to control the motion of atoms on a nanoscopic scale. Chromium atoms were focused by a standing-wave laser field as they deposited onto a silicon substrate. The resulting nanostructure consisted of a series of narrow lines covering 0.4 millimeter by 1 millimeter. Atomic force microscopy measurements showed a line width of 65 +/- 6 nanometers, a spacing of 212.78 nanometers, and a height of 34 +/-+ 10 nanometers. The observed line widths and shapes are compared with the predictions of a semiclassical atom optical model.

Science•Nov 5, 1993•406 citations

Fabrication of nanostructures with complex spatial frequency via laser-focused atomic deposition

Tong Zhang, Cong Yin, Yuejin Zhao +5 more

In this paper we report on experiments generating complex one-dimensional nanoscale patterns with the laser-focused atomic deposition technique. A beam of collimated chromium atoms intersect with an exact on-resonant laser standing wave at 7 S 3 → 7 transition of 52 Cr. With the usage of proper laser intensity and reflectivity of the retroreflecting mirror, which are used to form the standing wave, nanolines with complex spatial frequencies (both λ /2 and λ /4) can be fabricated in one-step deposition. The proportion of the two structures could be 1:1.

Applied Physics Express•Apr 10, 2019•1 citation

Laser manipulation of atoms and nanofabrication

Erich Jurdik

Fundamental interaction processes between atoms and photons are exploited to control external degrees of freedom of the atoms. Laser light, when properly tuned near an atomic resonance, exerts such forces that the atoms are repelled from or attracted to the regions with low light intensities. We use these forces to manipulate atom beams on nanometer-scale. In the simplest approach to nanofabrication via atom optics, a laser standing wave serves as a 'mask' through which the atoms are deposited onto a substrate. In this thesis we first present the modeling results on the focusing properties of a standing wave laser field and on the surface diffusion and growth phenomena in laser-focused atomic deposition. The development of our experimental facility for laser-manipulated deposition with chromium atoms (based on the obtained modeling results) is reported on. Thereafter, we demonstrate laser manipulation of chromium atoms and fabrication of nanostructures with these atoms. The results obtained in Nijmegen and also those obtained in collaboration with J.J. McClelland's group from the National Institute of Standards and Technology (Gaithersburg, Maryland, USA) are analyzed with the aim of understanding the role of atom-optical and surface growth phenomena in the fabrication process of laser-focused nanostructures

•Jan 1, 2001•5 citations

Atom Lithography with a Chromium Atomic Beam

Zhang Wen-Tao, Tongbao Li

Direct write atom lithography is a new technique in which resonant light is used to pattern an atomic beam and the nanostructures are formed when the atoms deposit on the substrate. We design an experiment setup to fabricate chromium nanolines by depositing an atomic beam of 52 Cr through an off-resonant laser standing wave with the wavelength of 425.55 nm onto a silicon substrate. The resulting nanolines exhibit a period of 215±3 nm with height of 1 nm.

Chinese Physics Letters•Oct 26, 2006•4 citations

Laser-diode-tuned chromium atom trapping and fabrication with atom optics technology

Kenji Okamoto, Hironobu Inouye, Yasushi Inouye +1 more

We developed a laser-beam-controlled atom-manipulation system to deposit nanometric structure of atoms on a substrate. Atom beam of chromium is thermally evaporated and collimated with Doppler cooling technique using frequency-tuned laser diode. The gradient force is exerted on atoms by a standing wave over the substrate, and atoms are trapped in a low potential region of the standing wave. Consequently, a series of lines are formed on the substrate with the same periodicity to the standing wave. We present the analysis of trajectories of atoms in the light force potential to find conditions of the laser power, the sign and the degree of the detuning of the laser frequency from the resonance frequency of the atom, to reduce the width of the structure.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•May 7, 1999•0 citations
The technology of laser-focused atomic deposition can be used to develop the nanostrucrure transfer standard of length.When the frequency of laser standing wave is higher than the resonant frequency of atoms,the atoms will be focused on the wave node of the standing wave.The collimated Cr atoms are focused by a standing-wave laser field as they are deposited on a silicon substrate.Atomic force microscopy measurements shows a spacing of 215nm.
The techniques of atom optics can be applied during the deposition of atoms onto a surface to produce nanostructures. A laser is used to form a standing wave intensity pattern in front of the substrate. An atom beam, which has been collimated by optical means, is focused onto the substrate by dipole forces from the standing wave pattern so as to deposit a series of lines spaced by half the laser wavelength. We describe the fabrication of a Cr nanograting formed using this new technique. The experimental arrangement for deposition and the optical collimation of the atom beam are described. Scanning electron microscopy (SEM) and atomic force microscopy (AFM) images of the resulting nanostructures are presented.
The ability to fabricate nanometer-sized structures that are stable in air has the potential to contribute significantly to the advancement of new nanotechnologies and our understanding of nanoscale systems. Laser light can be used to control the motion of atoms on a nanoscopic scale. Chromium atoms were focused by a standing-wave laser field as they deposited onto a silicon substrate. The resulting nanostructure consisted of a series of narrow lines covering 0.4 millimeter by 1 millimeter. Atomic force microscopy measurements showed a line width of 65 +/- 6 nanometers, a spacing of 212.78 nanometers, and a height of 34 +/-+ 10 nanometers. The observed line widths and shapes are compared with the predictions of a semiclassical atom optical model.
In this paper we report on experiments generating complex one-dimensional nanoscale patterns with the laser-focused atomic deposition technique. A beam of collimated chromium atoms intersect with an exact on-resonant laser standing wave at 7 S 3 → 7 transition of 52 Cr. With the usage of proper laser intensity and reflectivity of the retroreflecting mirror, which are used to form the standing wave, nanolines with complex spatial frequencies (both λ /2 and λ /4) can be fabricated in one-step deposition. The proportion of the two structures could be 1:1.
Fundamental interaction processes between atoms and photons are exploited to control external degrees of freedom of the atoms. Laser light, when properly tuned near an atomic resonance, exerts such forces that the atoms are repelled from or attracted to the regions with low light intensities. We use these forces to manipulate atom beams on nanometer-scale. In the simplest approach to nanofabrication via atom optics, a laser standing wave serves as a 'mask' through which the atoms are deposited onto a substrate. In this thesis we first present the modeling results on the focusing properties of a standing wave laser field and on the surface diffusion and growth phenomena in laser-focused atomic deposition. The development of our experimental facility for laser-manipulated deposition with chromium atoms (based on the obtained modeling results) is reported on. Thereafter, we demonstrate laser manipulation of chromium atoms and fabrication of nanostructures with these atoms. The results obtained in Nijmegen and also those obtained in collaboration with J.J. McClelland's group from the National Institute of Standards and Technology (Gaithersburg, Maryland, USA) are analyzed with the aim of understanding the role of atom-optical and surface growth phenomena in the fabrication process of laser-focused nanostructures
We developed a laser-beam-controlled atom-manipulation system to deposit nanometric structure of atoms on a substrate. Atom beam of chromium is thermally evaporated and collimated with Doppler cooling technique using frequency-tuned laser diode. The gradient force is exerted on atoms by a standing wave over the substrate, and atoms are trapped in a low potential region of the standing wave. Consequently, a series of lines are formed on the substrate with the same periodicity to the standing wave. We present the analysis of trajectories of atoms in the light force potential to find conditions of the laser power, the sign and the degree of the detuning of the laser frequency from the resonance frequency of the atom, to reduce the width of the structure.