Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

International Symposium on Advances in Electrical, Electronics and Computer Engineering (ISAEECE)

Construction of Regular and Irregular QC-LDPC Codes: a Finite Field Approach and Masking

Xiaopeng Chen, Lin Zhou, Rui Zhao, Yucheng He

Published Jan 1, 2016• 1 citation
Publisher

Abstract

Quasi-Cyclic Low-Density Parity-Check (QC-LDPC) codes require less hardware resources due to the quasi-cyclic structure of parity-check matrices.In this paper, two improved methods for constructing QC-LDPC codes are proposed.Firstly, in order to make sure the masked LDPC codes have flexible code rate and code length, an improved construction of masking matrix is presented.The proposed regular masking matrix of QC-LDPC codes have the girth at least 6.Then, the irregular codes are constructed by using improved finite field approach and PEG algorithm, which result in large girth and less short cycles.Simulations demonstrate that the proposed QC-LDPC codes have both lower error floor and good waterfall performance.

DOI
10.2991/isaeece-16.2016.41

Related papers

Construction of Irregular QC-LDPC Codes via Masking with ACE Optimization

Guojun Han, Yong Liang Guan, Lingjun Kong

Quasi-cyclic low-density parity-check (QC-LDPC) codes constructed by using algebraic approaches, such as finite geometry and finite field, generally have good structural properties and very low error-floors, and facilitate hardware implementation. Irregular QC-LDPC codes constructed from such QC-LDPC codes by using the masking technique, when decoded with the sum-product algorithm (SPA), have low decoding complexity, but often show early error-floors. In this paper, the relationship of cycle, girth and approximate cycle EMD (ACE) between the masking matrix and masked matrix is investigated, and the ACE algorithm is modified and used to construct the masking matrix for irregular QC-LDPC codes. Simulations demonstrate that the codes constructed by masking with ACE optimization exhibit much improved waterfall performance and lower error floors.

IEEE Communications Letters•Jan 31, 2014•34 citations

An Improved Construction Method of QC-LDPC Codes Based on the PEG Algorithm

Liqun Huang, Yuliang Wang, Ping Gong

Due to quasi-cyclic structure of parity-check matrices, Quasi-Cyclic Low-Density Parity-Check (QC-LDPC) codes reduce hardware requirements, and thus they have a higher practical value than random LDPC codes. This paper proposes an improved construction method of QC-LDPC based on PEG Algorithm, and the girth of the QC-LDPC codes has an increase of 2. Firstly, a base matrix is generated by the PEG algorithm, and then the base matrix is expanded using the unit circle permutation matrix, at the same time, the short loop of the base matrix is eliminated. This approach has the advantages of the PEG algorithm and the QC-LDPC codes, and simulation results show that bit error rate (BER) performance of the QC-LDPC codes presented in this paper is the same as or exceeds the one of randomly constructed LDPC codes.

Pacific-Asia Conference on Circuits, Communications and Systems•Jul 1, 2011•4 citations

Algebraic Quasi-Cyclic LDPC Codes: Construction, Low Error-Floor, Large Girth and a Reduced-Complexity Decoding Scheme

Juane Li, Keke Liu, Shu Lin +1 more

This paper presents a simple and very flexible method for constructing quasi-cyclic (QC) low density paritycheck (LDPC) codes based on finite fields. The code construction is based on two arbitrary subsets of elements from a given field. Some well known constructions of QC-LDPC codes based on finite fields and combinatorial designs are special cases of the proposed construction. The proposed construction in conjunction with a technique, known as masking, results in codes whose Tanner graphs have girth 8 or larger. Experimental results show that codes constructed using the proposed construction perform well and have low error-floors. Also presented in the paper is a reduced-complexity iterative decoding scheme for QC-LDPC codes based on the section-wise cyclic structure of their parity-check matrices. The proposed decoding scheme is an improvement of an earlier proposed reduced-complexity iterative decoding scheme.

IEEE Transactions on Communications•Jul 15, 2014•141 citations

An Efficient Method of Constructing Quasi-Cyclic Low-Density Parity-Check Codes

Zhanji Wu, Jiao Cheng

An efficient method of constructing irregular quasi-cyclic (QC) low-density parity-check (LDPC) codes is proposed. In order to find the degree distribution with low convergence threshold, the extrinsic information transfer (EXIT) chart is utilized to optimize the degree distribution of LDPC codes. Then, a modified progressive edge growth (PEG) algorithm is used to get the mask matrix with the optimal degree distribution. Finally, the parity-check matrix of QC LDPC code is constructed based on the mask matrix, and the shift values are optimized to eliminate short cycles. Simulation results show that the constructed irregular QC LDPC codes with optimized degree distribution significantly outperform the regular QC LDPC codes in the additive white Gaussion noise (AWGN) channel.

IEEE Vehicular Technology Conference•Sep 1, 2012•0 citations

Novel construction and cycle analysis of Quasi-Cyclic Low-Density Parity-Check codes

Wenwen Li, Mao Ai, Jie Qiu +1 more

Quasi-Cyclic Low-Density Parity-Check (QC-LDPC) codes have practical significance in the field of engineering, thus their construction algorithm is a hot issue in the field of LDPC codes. Based on existing construction methods, particularly the method based on Progressive Edge-Growth (PEG) algorithm, a new construction method of shift matrix is proposed. It can effectively avoid the copy of cycle structures, especially short cycles in base matrix after extension. Besides, it also relieves the time cost caused by random search, and greatly improves the length of cycles when compared with algorithms based on methods such as quadratic congruence and arithmetic sequence. Those algorithms can only eliminate short cycles with length 4, while our method can provide QC-LDPC codes without length 6 at least. Cycle analysis and simulation results show that the newly constructed QC-LDPC codes have good cycle structure and error correction performance.

IEEE International Conference on Progress in Informatics and Computing•Dec 1, 2015•2 citations

Quasi-Cyclic Low-Density Parity-Check Codes Based on Progressive Cycle Growth Algorithm

Yuanhua Liu, Meiling Zhang, Niu Xin-Liang

Short cycles in the Tanner graph of a given LDPC code has negative effect on the performance of iterative decoding. To improve the performance, we presented an approach for constructing Quasi-Cyclic Low-Density Parity-Check (QC-LDPC) codes whose associated Tanner graph has large girth and a small amount of short cycles. Each column block of the parity check matrix was designed by adding circulant permutation sub-matrices one after another, provided the current parity check matrix has minimal number of short cycles. The condition for the proposed QC-LDPC codes to have girth at least 6 was also analyzed. Regular and irregular QC-LDPC codes with various lengths and rates can be constructed. Simulations show that the proposed QC-LDPC codes have less short cycles and better performance than existing progressive edge growth based QC-LDPC codes.

International Conference on Instrumentation and Measurement, Computer, Communication and Control (IMCCC)•Jul 1, 2016•1 citation
Quasi-Cyclic Low-Density Parity-Check (QC-LDPC) codes require less hardware resources due to the quasi-cyclic structure of parity-check matrices.In this paper, two improved methods for constructing QC-LDPC codes are proposed.Firstly, in order to make sure the masked LDPC codes have flexible code rate and code length, an improved construction of masking matrix is presented.The proposed regular masking matrix of QC-LDPC codes have the girth at least 6.Then, the irregular codes are constructed by using improved finite field approach and PEG algorithm, which result in large girth and less short cycles.Simulations demonstrate that the proposed QC-LDPC codes have both lower error floor and good waterfall performance.
Quasi-cyclic low-density parity-check (QC-LDPC) codes constructed by using algebraic approaches, such as finite geometry and finite field, generally have good structural properties and very low error-floors, and facilitate hardware implementation. Irregular QC-LDPC codes constructed from such QC-LDPC codes by using the masking technique, when decoded with the sum-product algorithm (SPA), have low decoding complexity, but often show early error-floors. In this paper, the relationship of cycle, girth and approximate cycle EMD (ACE) between the masking matrix and masked matrix is investigated, and the ACE algorithm is modified and used to construct the masking matrix for irregular QC-LDPC codes. Simulations demonstrate that the codes constructed by masking with ACE optimization exhibit much improved waterfall performance and lower error floors.
Due to quasi-cyclic structure of parity-check matrices, Quasi-Cyclic Low-Density Parity-Check (QC-LDPC) codes reduce hardware requirements, and thus they have a higher practical value than random LDPC codes. This paper proposes an improved construction method of QC-LDPC based on PEG Algorithm, and the girth of the QC-LDPC codes has an increase of 2. Firstly, a base matrix is generated by the PEG algorithm, and then the base matrix is expanded using the unit circle permutation matrix, at the same time, the short loop of the base matrix is eliminated. This approach has the advantages of the PEG algorithm and the QC-LDPC codes, and simulation results show that bit error rate (BER) performance of the QC-LDPC codes presented in this paper is the same as or exceeds the one of randomly constructed LDPC codes.
This paper presents a simple and very flexible method for constructing quasi-cyclic (QC) low density paritycheck (LDPC) codes based on finite fields. The code construction is based on two arbitrary subsets of elements from a given field. Some well known constructions of QC-LDPC codes based on finite fields and combinatorial designs are special cases of the proposed construction. The proposed construction in conjunction with a technique, known as masking, results in codes whose Tanner graphs have girth 8 or larger. Experimental results show that codes constructed using the proposed construction perform well and have low error-floors. Also presented in the paper is a reduced-complexity iterative decoding scheme for QC-LDPC codes based on the section-wise cyclic structure of their parity-check matrices. The proposed decoding scheme is an improvement of an earlier proposed reduced-complexity iterative decoding scheme.
An efficient method of constructing irregular quasi-cyclic (QC) low-density parity-check (LDPC) codes is proposed. In order to find the degree distribution with low convergence threshold, the extrinsic information transfer (EXIT) chart is utilized to optimize the degree distribution of LDPC codes. Then, a modified progressive edge growth (PEG) algorithm is used to get the mask matrix with the optimal degree distribution. Finally, the parity-check matrix of QC LDPC code is constructed based on the mask matrix, and the shift values are optimized to eliminate short cycles. Simulation results show that the constructed irregular QC LDPC codes with optimized degree distribution significantly outperform the regular QC LDPC codes in the additive white Gaussion noise (AWGN) channel.
Quasi-Cyclic Low-Density Parity-Check (QC-LDPC) codes have practical significance in the field of engineering, thus their construction algorithm is a hot issue in the field of LDPC codes. Based on existing construction methods, particularly the method based on Progressive Edge-Growth (PEG) algorithm, a new construction method of shift matrix is proposed. It can effectively avoid the copy of cycle structures, especially short cycles in base matrix after extension. Besides, it also relieves the time cost caused by random search, and greatly improves the length of cycles when compared with algorithms based on methods such as quadratic congruence and arithmetic sequence. Those algorithms can only eliminate short cycles with length 4, while our method can provide QC-LDPC codes without length 6 at least. Cycle analysis and simulation results show that the newly constructed QC-LDPC codes have good cycle structure and error correction performance.
Short cycles in the Tanner graph of a given LDPC code has negative effect on the performance of iterative decoding. To improve the performance, we presented an approach for constructing Quasi-Cyclic Low-Density Parity-Check (QC-LDPC) codes whose associated Tanner graph has large girth and a small amount of short cycles. Each column block of the parity check matrix was designed by adding circulant permutation sub-matrices one after another, provided the current parity check matrix has minimal number of short cycles. The condition for the proposed QC-LDPC codes to have girth at least 6 was also analyzed. Regular and irregular QC-LDPC codes with various lengths and rates can be constructed. Simulations show that the proposed QC-LDPC codes have less short cycles and better performance than existing progressive edge growth based QC-LDPC codes.