Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Physical Review A

Heterodyne beats between a continuous-wave laser and a frequency comb beyond the shot-noise limit of a single comb mode

Jean-Daniel Deschênes, Jérôme Genest

Published Feb 4, 2013• 30 citations
Publisher

Abstract

We demonstrate a simple and robust technique for improving the signal-to-noise ratio (SNR) of heterodyne beats between a low-power frequency comb and a continuous-wave (cw) laser. By exploiting the pulsed nature of the comb, a SNR better than the shot-noise limit for the beating of a single mode can be obtained. This technique relies on electrical gating of the beat signal to remove as much shot noise as possible from the measurement. This technique can also be understood as efficiently using the beating of the cw laser with many comb modes simultaneously. We demonstrate a simple experimental setup which achieves a 50-fold improvement in the shot-noise limited SNR of a conventional heterodyne setup and is in long-term agreement with a conventional heterodyne setup, at least to better than 1 part in ${10}^{17}$. The resulting analog signal is completely compatible with existing heterodyne setups and can be used as an upgrade to an existing setup which would benefit from the SNR improvement.

DOI
10.1103/physreva.87.023802

Related papers

Approaching the Quantum Noise Limit of Heterodyne between a Continuous Wave Laser and an Optical Frequency Comb

Eugene Tsao, Noah Lordi, Alexander J. Lind +3 more

Frequency comb heterodyne underlies the highest precision measurements of frequency and time. While shot noise is typically considered the standard quantum limit,here we state where a new lower limit lies and show progress reaching this limit.

•Jan 1, 2023•0 citations

Entanglement-enhanced dual-comb spectroscopy

Haowei Shi, Zaijun Chen, Scott E. Fraser +3 more

Abstract Dual-comb interferometry harnesses the interference of two laser frequency combs to provide unprecedented capability in spectroscopy applications. In the past decade, the state-of-the-art systems have reached a point where the signal-to-noise ratio per unit acquisition time is fundamentally limited by shot noise from vacuum fluctuations. To address the issue, we propose an entanglement-enhanced dual-comb spectroscopy protocol that leverages quantum resources to significantly improve the signal-to-noise ratio performance. To analyze the performance of real systems, we develop a quantum model of dual-comb spectroscopy that takes practical noises into consideration. Based on this model, we propose quantum combs with side-band entanglement around each comb lines to suppress the shot noise in heterodyne detection. Our results show significant quantum advantages in the uW to mW power range, making this technique particularly attractive for biological and chemical sensing applications. Furthermore, the quantum comb can be engineered using nonlinear optics and promises near-term experimentation.

arXiv:2304.01516•npj Quantum Information•Sep 19, 2023•28 citations

Quantum-enhanced optical phase-insensitive heterodyne detection beyond 3-dB noise penalty of image band

Keitaro Anai, Yutaro Enomoto, H. Omura +4 more

Optical phase-insensitive heterodyne (beat-note) detection, which measures the relative phase of two beams at different frequencies through their interference, is a key sensing technology for various spatial/temporal measurements, such as frequency measurements in optical frequency combs. However, its sensitivity is limited not only by shot noise from the signal frequency band but also by the extra shot noise from an image band, known as the 3-dB noise penalty. Here, we propose a method to remove shot noise from all these bands using squeezed light. We also demonstrate beyond-3-dB noise reduction experimentally, confirming that our method actually reduces shot noise from both the signal and extra bands simultaneously. Our work should boost the sensitivity of various spatial/temporal measurements beyond the current limitations.

arXiv:2305.06579•Optics Express•May 2, 2024•8 citations

Second-harmonic generation with femtosecond pulses and its applications in sub-shot-noise detection

Dorel Guzun, Yong-qing Li, Min Xiao

We present a new heterodyne technique for detecting weak signals beyond the standard shot-noise limited by employing amplitude-squeezed light as the local oscillator (LO) field. The amplitude-squeezed LO field at 428.8 nm is generated from a highly efficient (up to 60% conversion efficiency) single-pass second-harmonic generation in a nonlinear crystal (KNbO3) pumped by femtosecond (130 fs) pulses at 857.7 nm. The weak signal field is introduced from the entrance port of the crystal to combine with the generated squeezed LO field. An enhancement of 0.7 dB (1.4 dB inferred) in signal-to-noise ratio beyond the shot-noise limit is directly observed for this new heterodyne detection scheme. Practical applications of proposed technique in laser radar systems are discussed.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Mar 28, 2000•0 citations

Broadband near-to-shot-noise suppression of arbitrary cw-laser excess intensity noise in the gigahertz range

Ernest A. Michael, Laurent Pallanca

Broadband near-to-shot-noise suppression of the intensity noise from a continuous-wave (cw) fiber laser at 1550 nm is demonstrated at GHz-frequencies using feed-forward phase-matched destructive noise interference impressed onto the optical signal with a fiber electro-optic power modulator. The scheme is independent of the laser frequency and therefore is suitable for tunable lasers. It can be used with some modifications after an optical fiber-amplifier boosting a cw laser signal. A noise residual of down to 2 dB above the shot-noise was measured, which is about 2 dB below the prediction with a rigorous noise model. While the total laser noise can be removed, inclusive shot noise, because the latter is still 10 dB above the thermal noise, the power splitter introduces some partition noise above the shot level. In that case, a sub-shot-noise suppression scheme should be possible by replacing the photon anti-correlation of the power splitter by the co-correlation obtained from a paired photon or twin beam source.

Optics Letters•Mar 20, 2015•9 citations

Squeezed-light-enhanced heterodyne laser Doppler vibrometer

Mengwei Yu

Laser Doppler Vibrometry (LDV) is a high-precision, non-contact measurement technique that leverages optical interference between a reference beam and a Doppler-shifted measurement beam derived from coherent laser light. By detecting phase variations induced by surface vibrations, LDV has become a widely utilized tool in industrial environments for vibration analysis, structural diagnostics, and quality control. The detection sensitivity of the LDV is fundamentally constrained by the Poissonian statistics of photon arrivals. In heterodyne LDV systems, the enhancement of signal-to-noise ratio (SNR) and measurement resolution under shot-noise-limited conditions typically requires increasing the optical power of the measurement beam. However, this approach becomes infeasible in scenarios with strict constraints on thermal load or optical power. Recent studies have demonstrated that injecting squeezed vacuum states as non-classical light sources can suppress quantum noise while maintaining low optical power, thus surpassing the standard quantum limit. This thesis introduces the principle of the heterodyne LDV combined with squeezed light sources. The first scientific hypothesis proposed herein is that introducing laser light with squeezed quantum uncertainties into industrial heterodyne LDVs enables vibration measurements to exceed the physical resolution limits of traditional LDVs, achieving sub-shot-noise sensitivity. The thesis designed a squeezed-light-enhanced heterodyne LDV, achieving over 3 dB of squeezing within a 40 MHz measurement bandwidth and demonstrating a noise-equivalent displacement resolution reaching 8 fm/√Hz, thereby confirming the first hypothesis. Addressing the limitations imposed by the finite dynamic range of analog-to-digital converters (ADCs) on the SNR of digitally demodulated phase-modulated signals, the thesis proposes a clipping-based synchronous zero-crossing sampling technique and a corresponding second scientific hypothesis: that this sampling scheme enables heterodyne LDV to overcome the digital noise floor defined by the ADC's SNR. Experimental results demonstrate that this sampling and demodulation approach effectively reduces ADC quantization noise, allowing the digital resolution of the demodulated phase-modulated signal to surpass the ADC-imposed SNR limit while preserving the quantum noise-level squeezing, thereby validating the second hypothesis. Compared to previous work, this research constitutes the first experimental verification of squeezed-light-enhanced measurement feasibility in a classical heterodyne LDV operating at a 40 MHz difference frequency, advancing the application of quantum-enhanced precision metrology in industrial vibration testing.

•Dec 15, 2025•0 citations
We demonstrate a simple and robust technique for improving the signal-to-noise ratio (SNR) of heterodyne beats between a low-power frequency comb and a continuous-wave (cw) laser. By exploiting the pulsed nature of the comb, a SNR better than the shot-noise limit for the beating of a single mode can be obtained. This technique relies on electrical gating of the beat signal to remove as much shot noise as possible from the measurement. This technique can also be understood as efficiently using the beating of the cw laser with many comb modes simultaneously. We demonstrate a simple experimental setup which achieves a 50-fold improvement in the shot-noise limited SNR of a conventional heterodyne setup and is in long-term agreement with a conventional heterodyne setup, at least to better than 1 part in 1017{10}^{17}1017. The resulting analog signal is completely compatible with existing heterodyne setups and can be used as an upgrade to an existing setup which would benefit from the SNR improvement.
Abstract Dual-comb interferometry harnesses the interference of two laser frequency combs to provide unprecedented capability in spectroscopy applications. In the past decade, the state-of-the-art systems have reached a point where the signal-to-noise ratio per unit acquisition time is fundamentally limited by shot noise from vacuum fluctuations. To address the issue, we propose an entanglement-enhanced dual-comb spectroscopy protocol that leverages quantum resources to significantly improve the signal-to-noise ratio performance. To analyze the performance of real systems, we develop a quantum model of dual-comb spectroscopy that takes practical noises into consideration. Based on this model, we propose quantum combs with side-band entanglement around each comb lines to suppress the shot noise in heterodyne detection. Our results show significant quantum advantages in the uW to mW power range, making this technique particularly attractive for biological and chemical sensing applications. Furthermore, the quantum comb can be engineered using nonlinear optics and promises near-term experimentation.
Optical phase-insensitive heterodyne (beat-note) detection, which measures the relative phase of two beams at different frequencies through their interference, is a key sensing technology for various spatial/temporal measurements, such as frequency measurements in optical frequency combs. However, its sensitivity is limited not only by shot noise from the signal frequency band but also by the extra shot noise from an image band, known as the 3-dB noise penalty. Here, we propose a method to remove shot noise from all these bands using squeezed light. We also demonstrate beyond-3-dB noise reduction experimentally, confirming that our method actually reduces shot noise from both the signal and extra bands simultaneously. Our work should boost the sensitivity of various spatial/temporal measurements beyond the current limitations.
We present a new heterodyne technique for detecting weak signals beyond the standard shot-noise limited by employing amplitude-squeezed light as the local oscillator (LO) field. The amplitude-squeezed LO field at 428.8 nm is generated from a highly efficient (up to 60% conversion efficiency) single-pass second-harmonic generation in a nonlinear crystal (KNbO3) pumped by femtosecond (130 fs) pulses at 857.7 nm. The weak signal field is introduced from the entrance port of the crystal to combine with the generated squeezed LO field. An enhancement of 0.7 dB (1.4 dB inferred) in signal-to-noise ratio beyond the shot-noise limit is directly observed for this new heterodyne detection scheme. Practical applications of proposed technique in laser radar systems are discussed.
Broadband near-to-shot-noise suppression of the intensity noise from a continuous-wave (cw) fiber laser at 1550 nm is demonstrated at GHz-frequencies using feed-forward phase-matched destructive noise interference impressed onto the optical signal with a fiber electro-optic power modulator. The scheme is independent of the laser frequency and therefore is suitable for tunable lasers. It can be used with some modifications after an optical fiber-amplifier boosting a cw laser signal. A noise residual of down to 2 dB above the shot-noise was measured, which is about 2 dB below the prediction with a rigorous noise model. While the total laser noise can be removed, inclusive shot noise, because the latter is still 10 dB above the thermal noise, the power splitter introduces some partition noise above the shot level. In that case, a sub-shot-noise suppression scheme should be possible by replacing the photon anti-correlation of the power splitter by the co-correlation obtained from a paired photon or twin beam source.
Laser Doppler Vibrometry (LDV) is a high-precision, non-contact measurement technique that leverages optical interference between a reference beam and a Doppler-shifted measurement beam derived from coherent laser light. By detecting phase variations induced by surface vibrations, LDV has become a widely utilized tool in industrial environments for vibration analysis, structural diagnostics, and quality control. The detection sensitivity of the LDV is fundamentally constrained by the Poissonian statistics of photon arrivals. In heterodyne LDV systems, the enhancement of signal-to-noise ratio (SNR) and measurement resolution under shot-noise-limited conditions typically requires increasing the optical power of the measurement beam. However, this approach becomes infeasible in scenarios with strict constraints on thermal load or optical power. Recent studies have demonstrated that injecting squeezed vacuum states as non-classical light sources can suppress quantum noise while maintaining low optical power, thus surpassing the standard quantum limit. This thesis introduces the principle of the heterodyne LDV combined with squeezed light sources. The first scientific hypothesis proposed herein is that introducing laser light with squeezed quantum uncertainties into industrial heterodyne LDVs enables vibration measurements to exceed the physical resolution limits of traditional LDVs, achieving sub-shot-noise sensitivity. The thesis designed a squeezed-light-enhanced heterodyne LDV, achieving over 3 dB of squeezing within a 40 MHz measurement bandwidth and demonstrating a noise-equivalent displacement resolution reaching 8 fm/√Hz, thereby confirming the first hypothesis. Addressing the limitations imposed by the finite dynamic range of analog-to-digital converters (ADCs) on the SNR of digitally demodulated phase-modulated signals, the thesis proposes a clipping-based synchronous zero-crossing sampling technique and a corresponding second scientific hypothesis: that this sampling scheme enables heterodyne LDV to overcome the digital noise floor defined by the ADC's SNR. Experimental results demonstrate that this sampling and demodulation approach effectively reduces ADC quantization noise, allowing the digital resolution of the demodulated phase-modulated signal to surpass the ADC-imposed SNR limit while preserving the quantum noise-level squeezing, thereby validating the second hypothesis. Compared to previous work, this research constitutes the first experimental verification of squeezed-light-enhanced measurement feasibility in a classical heterodyne LDV operating at a 40 MHz difference frequency, advancing the application of quantum-enhanced precision metrology in industrial vibration testing.