Increasing the area coverage of superconducting nanowire single-photon detectors

Labao Zhang, Qingyuan Zhao, Yan Zhong +6 more

Mikkel Ejrnaes, A. Casaburi, S. Pagano +4 more

Ultrathin NbN nanowires is the material of choice for superconducting single photon detectors (SSPD) due to the good efficiency, dark count rate and timing jitter at 1550 nm wavelength obtained. These performance parameters are achieved using nanowires a few nanometers thick and 100 nm wide patterned into a meander shape in order to achieve area coverage. The meander shape effectively makes the SSPD of a single very long nanowire in turn giving it a significant inductance which limits the maximum count rate of the detector. Recently, we demonstrated how one can exploit a cascade switch to the normal state of nanowires connected in parallel to significantly reduce the SSPD inductance and increase the signal amplitude. Here we present how one can configure SSPDs that uses multiple cascade switches to the normal state. We show how this principle can be used to expand the SSPD coverage area with a very limited increase in detector inductance with area. Finally we discuss our first results obtained with SSPD based on the multiple cascade switch principle, showing correct operation, increased operational bias range and increased signal pulse amplitudes.

Roberto Cristiano, Mikkel Ejrnaes, A. Casaburi +4 more

Ultrathin NbN nanowires is the material of choice for superconducting single photon detectors (SSPD) due to the good efficiency, dark count rate and timing jitter at 1550 nm wavelength obtained. These performance parameters are achieved using nanowires a few nanometers thick and 100 nm wide patterned into a meander shape in order to achieve area coverage. The meander shape effectively makes the SSPD of a single very long nanowire in turn giving it a significant inductance which limits the maximum count rate of the detector. Recently, we demonstrated how one can exploit a cascade switch to the normal state of nanowires connected in parallel to significantly reduce the SSPD inductance and increase the signal amplitude. Here we present how one can configure SSPDs that uses multiple cascade switches to the normal state. We show how this principle can be used to expand the SSPD coverage area with a very limited increase in detector inductance with area. Finally we discuss our first results obtained with SSPD based on the multiple cascade switch principle, showing correct operation.

Berggren, Anant, Baek +11 more

Mikkel Ejrnaes, A. Casaburi, Orlando Quaranta +6 more

Cascade switch superconducting nanowire single photon detectors has been fabricated of ultrathin NbN films deposited by DC-magnetron sputtering at room temperature on MgO substrates. Detectors using 4 to 24 nanowires in parallel, having an area coverage of 5times mum2and a filling factor of 40%, have been investigated. Signal amplitudes increase with the number of parallel nanowires and reaches 12.3 mV with a signal noise of 20 muV. The range of bias currents where the detectors emit signal pulses also increase with the number of parallel nanowires and exceeds the nanowire critical current.

Shigehito Miki