Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

International Topical Meeting on Microwave Photonics

20 GHz instantaneous bandwidth RF spectrum analyzer with high time-resolution

Perrine Berger, Muriel Schwarz, S. Molin, Daniel Dolfi, Loïc Morvan, Anne Louchet-Chauvet, T. Chanelière, J.-L. Le Gouët

Published Oct 1, 2014• 11 citations
Publisher

Abstract

We report on the experimental demonstration of a multi-gigahertz bandwidth RF spectrum analyzer exhibiting a resolution below 20 MHz, based on spectral hole burning in a rare-earth ion-doped crystal. To be compatible with demanding real-time spectrum monitoring applications, our demonstrator is designed to reach a high time resolution. For this purpose, we implemented the so-called “rainbow” architecture in which the spectral components of the incoming signal are angularly separated by the crystal, and are then acquired with a pixelated photodetector. The Tm3+:YAG crystal is programmed with a semiconductor DFB laser which frequency scan is servo-controlled and synchronized with the angular scan of a resonant galvanometric mirror, while a high-speed camera is used to acquire the spectra. In the perspective of future implementation within a system, the crystal is cooled below 4 K with a closed-cycle cryostat. With this setup, we have been able to monitor and record the spectrum of complex microwave signals over an instantaneous bandwidth above 20 GHz, with a time resolution below 100 μs, 400 resolvable frequency components and a probability of intercept of 100 %.

DOI
10.1109/mwp.2014.6994566

Related papers

RF Spectrum Analyzer for Pulsed Signals: Ultra-Wide Instantaneous Bandwidth, High Sensitivity, and High Time-Resolution

Perrine Berger, Yoann Attal, Muriel Schwarz +6 more

We report on the experimental demonstration of a multi-gigahertz bandwidth RF spectrum analyzer based on spectral hole burning in a 3 K-cooled rare-earth ion-doped crystal. We implemented the so-called “rainbow” architecture in which the optically carried spectral components of the incoming signal are angularly separated by the crystal, and are then acquired with a pixelated photo-detector. With this setup, we have been able to monitor and record the spectrum of complex microwave signals over an instantaneous bandwidth above 20 GHz, with a time resolution below 100 μs, 400 resolvable frequency components and a 100% probability of intercept. RF pulsed signals in the μs range are perfectly analyzed with this high time-resolved set-up. The best achievable sensitivity for pulsed signals is computed and compared with another spectral hole burning technique.

Journal of Lightwave Technology•May 5, 2016•50 citations

10-GHz Bandwidth RF Spectral Analyzer with MHz Resolution Based on Holography in Tm3+: YAG

Guillaume Gorju, Adrien Chauve, Vincent Crozatier +3 more

We demonstrate a 10 GHz spectrum analyzer with MHz resolution and >30 dB dynamic range using the spectral-hole-burning (SHB) Tm3+:YAG crystal working at 793 nm. Thanks to the fast and linear chirping capabilities of the laser used, it has a potential 100% probability of interception and a response time in the ms range. The system is compared to a previously demonstrated SHB spectral analyzer

International Topical Meeting on Microwave Photonics•Oct 1, 2006•0 citations

RF spectrum analysis in spectral hole burning media

Max Colice, Friso Schlottau, Kelvin H. Wagner +4 more

We propose a novel, wideband spectrum analyzer based on spectral hole burning (SHB) technology. SHB crystals contain rare earth ions doped into a host lattice, and are cooled to cryogenic temperatures to allow sub-MHz hole burning linewidths. The signal spectrum is recorded in an SHB crystal by illuminating the crystal with an optical beam modulated by the RF signal of interest. The signal's spectral components excite those rare earth ions whose resonance frequencies coincide with the spectral component frequencies, engraving the RF spectrum into the crystal's absorption profile. Probing this altered absorption profile with a low power, chirped laser while measuring the transmitted intensity results in a time-domain readout of the accumulated RF signal spectrum. The resolution of the spectrum analyzer is limited only by the homogeneous linewidth of the rare earth ions (< 1 MHz when the SHB crystal is cooled to cryogenic temperatures). The spectrum analyzer bandwidth is limited by the inhomogeneous linewidth and by the electro-optic modulator bandwidth, both of which can be > 20 GHz.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Oct 22, 2004•17 citations

10-GHz bandwidth RF spectral analyzer with MHz resolution based on spectral hole burning in Tm/sup 3+/:YAG

Guillaume Gorju, Vincent Crozatier, I. Lorgeré +2 more

We demonstrate the first 10-GHz instantaneous bandwidth radio-frequency spectrum analyzer based on spectral hole burning in Tm/sup 3+/:YAG. It exhibits 10 000 frequency channels and a resolution better than 1 MHz. Thanks to the fast and linear chirping capabilities of the laser used, it has a potential 100% probability of interception and a response time in the millisecond range. Its linear dynamic range of 16 dB is presently essentially limited by the modest amount of optical power available and can be further improved.

IEEE Photonics Technology Letters•Oct 24, 2005•41 citations

Frequency-Doubled Fiber Lasers for RF Spectrum Analysis in Spectral-Hole-Burning Media

Max Colice, Jingyi Xiong, Kelvin H. Wagner

We demonstrate an RF spectrum analyzer based on spectral-hole burning (SHB) that operates with unity probability of intercept and resolution under 100 kHz. An SHB crystal, which consists of rare-earth ions doped into a crystal host, records the power spectrum of an RF signal modulated onto an optical carrier as a series of spectral holes that persist for about 10 ms. While the crystal's homogeneous and inhomogeneous linewidths place the fundamental limits on resolution and bandwidth, respectively, the practical limits depend on the lasers used to interrogate the record stored in the crystal's absorption profile. Up to now, SHB spectrum analyzers have used chirped beams from externally modulated, stabilized lasers, which have linewidths of under 10 kHz but cannot chirp over much more than octave bandwidths, or directly modulated diode lasers, which can chirp over more than 20GHz but have linewidths of about 1 MHz. Switching to chirped fiber lasers, which have natural linewidths of under 2 kHz and chirping linewidths on the order of 10 kHz, produces a measurement with fine resolution without any laser stabilization. In addition, by chirping the fiber laser with a sufficiently fast piezo, the resulting chirp could extend over tens of gigahertz in under 10 ms, yielding both fine resolution and broad bandwidth without extraordinary stabilization schemes.

IEEE Journal of Quantum Electronics•Apr 10, 2008•3 citations

Wideband versatile radio-frequency spectrum analyzer

V. Lavielle, I. Lorgeré, J.-L. Le Gouët +2 more

Operation of a wideband, versatile optical spectrum analyzer for radio-frequency (RF) signals is demonstrated. The device is based on spectral hole burning (SHB). The demonstration features 2.3-GHz instantaneous bandwidth, 500-kHz resolution, and a 32-dB dynamic range. A true RF signal, transferred to the optical carrier with the help of a Mach-Zehnder modulator, is analyzed with optical carrier suppression and zooming capabilities. This is to the authors' knowledge the largest instantaneous bandwidth ever demonstrated for a SHB-based processor in rare-earth-doped crystals.

Optics Letters•Mar 15, 2003•63 citations
We report on the experimental demonstration of a multi-gigahertz bandwidth RF spectrum analyzer exhibiting a resolution below 20 MHz, based on spectral hole burning in a rare-earth ion-doped crystal. To be compatible with demanding real-time spectrum monitoring applications, our demonstrator is designed to reach a high time resolution. For this purpose, we implemented the so-called “rainbow” architecture in which the spectral components of the incoming signal are angularly separated by the crystal, and are then acquired with a pixelated photodetector. The Tm3+:YAG crystal is programmed with a semiconductor DFB laser which frequency scan is servo-controlled and synchronized with the angular scan of a resonant galvanometric mirror, while a high-speed camera is used to acquire the spectra. In the perspective of future implementation within a system, the crystal is cooled below 4 K with a closed-cycle cryostat. With this setup, we have been able to monitor and record the spectrum of complex microwave signals over an instantaneous bandwidth above 20 GHz, with a time resolution below 100 μs, 400 resolvable frequency components and a probability of intercept of 100 %.
We report on the experimental demonstration of a multi-gigahertz bandwidth RF spectrum analyzer based on spectral hole burning in a 3 K-cooled rare-earth ion-doped crystal. We implemented the so-called “rainbow” architecture in which the optically carried spectral components of the incoming signal are angularly separated by the crystal, and are then acquired with a pixelated photo-detector. With this setup, we have been able to monitor and record the spectrum of complex microwave signals over an instantaneous bandwidth above 20 GHz, with a time resolution below 100 μs, 400 resolvable frequency components and a 100% probability of intercept. RF pulsed signals in the μs range are perfectly analyzed with this high time-resolved set-up. The best achievable sensitivity for pulsed signals is computed and compared with another spectral hole burning technique.
We propose a novel, wideband spectrum analyzer based on spectral hole burning (SHB) technology. SHB crystals contain rare earth ions doped into a host lattice, and are cooled to cryogenic temperatures to allow sub-MHz hole burning linewidths. The signal spectrum is recorded in an SHB crystal by illuminating the crystal with an optical beam modulated by the RF signal of interest. The signal's spectral components excite those rare earth ions whose resonance frequencies coincide with the spectral component frequencies, engraving the RF spectrum into the crystal's absorption profile. Probing this altered absorption profile with a low power, chirped laser while measuring the transmitted intensity results in a time-domain readout of the accumulated RF signal spectrum. The resolution of the spectrum analyzer is limited only by the homogeneous linewidth of the rare earth ions (< 1 MHz when the SHB crystal is cooled to cryogenic temperatures). The spectrum analyzer bandwidth is limited by the inhomogeneous linewidth and by the electro-optic modulator bandwidth, both of which can be > 20 GHz.
We demonstrate the first 10-GHz instantaneous bandwidth radio-frequency spectrum analyzer based on spectral hole burning in Tm/sup 3+/:YAG. It exhibits 10 000 frequency channels and a resolution better than 1 MHz. Thanks to the fast and linear chirping capabilities of the laser used, it has a potential 100% probability of interception and a response time in the millisecond range. Its linear dynamic range of 16 dB is presently essentially limited by the modest amount of optical power available and can be further improved.
We demonstrate an RF spectrum analyzer based on spectral-hole burning (SHB) that operates with unity probability of intercept and resolution under 100 kHz. An SHB crystal, which consists of rare-earth ions doped into a crystal host, records the power spectrum of an RF signal modulated onto an optical carrier as a series of spectral holes that persist for about 10 ms. While the crystal's homogeneous and inhomogeneous linewidths place the fundamental limits on resolution and bandwidth, respectively, the practical limits depend on the lasers used to interrogate the record stored in the crystal's absorption profile. Up to now, SHB spectrum analyzers have used chirped beams from externally modulated, stabilized lasers, which have linewidths of under 10 kHz but cannot chirp over much more than octave bandwidths, or directly modulated diode lasers, which can chirp over more than 20GHz but have linewidths of about 1 MHz. Switching to chirped fiber lasers, which have natural linewidths of under 2 kHz and chirping linewidths on the order of 10 kHz, produces a measurement with fine resolution without any laser stabilization. In addition, by chirping the fiber laser with a sufficiently fast piezo, the resulting chirp could extend over tens of gigahertz in under 10 ms, yielding both fine resolution and broad bandwidth without extraordinary stabilization schemes.
Operation of a wideband, versatile optical spectrum analyzer for radio-frequency (RF) signals is demonstrated. The device is based on spectral hole burning (SHB). The demonstration features 2.3-GHz instantaneous bandwidth, 500-kHz resolution, and a 32-dB dynamic range. A true RF signal, transferred to the optical carrier with the help of a Mach-Zehnder modulator, is analyzed with optical carrier suppression and zooming capabilities. This is to the authors' knowledge the largest instantaneous bandwidth ever demonstrated for a SHB-based processor in rare-earth-doped crystals.