Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

AIAA Plasmadynamics and Lasers Conference

Rates for Velocity-Changing Collisions in Optically Pumped Rubidium Laser

Douglas E. Thornton, Grady T. Phillips, Glen P. Perram

Published Jun 28, 2010• 0 citations
Publisher

Abstract

The Diode Pumped Alkali Laser (DPAL) is an optically-pumped three-level laser system with significant promise for scaling to high power. The rates for velocity changing collisions in the rubidium laser have been measured using sub-Doppler laser saturation spectroscopy. Spectra of the F”=2 to F’=1,2,3 hyperfine components of the Rb S1/2 – P3/2 D2 transition were observed for argon pressures of 0-110 mTorr and modulation frequencies of 700 3200 Hz. Sub-Doppler features with linewidths of about 23 MHz, or about four times the natural linewidth, were observed for the hyperfine transitions and cross-over resonances. A Doppler pedestal is also observed which increases with pressures and decreases with modulation frequency. The size of the Doppler pedestal relative to the homogeneous features yields a rate for reversing the direction of all velocity groups of 3.2 x 10 cm s.

DOI
10.2514/6.2010-4880

Related papers

Single-Photon-Level Sub-Doppler Pump-Probe Spectroscopy of Rubidium

Paul Burdekin, Samuele Grandi, Rielly Newbold +3 more

We propose and demonstrate pump-probe spectroscopy of rubidium absorption that reveals the sub-Doppler hyperfine structure of the ${}^{5}{\mathrm{S}}_{1/2}\ensuremath{\leftrightarrow}{}^{5}{\mathrm{P}}_{3/2}$ (${\mathrm{D}}_{2}$) transitions. The counterpropagating pump and probe lasers are independently tunable in frequency, with the probe operating at the single-photon level. The two-dimensional spectrum measured as the laser frequencies are scanned shows fluorescence, Doppler-broadened absorption dips, and sub-Doppler features. The detuning between the pump and probe lasers allows compensation of the Doppler shift for all atomic velocities in the room-temperature vapor, meaning we observe sub-Doppler features for all atoms in the beam. We detail a theoretical model of the system that incorporates fluorescence, saturation effects, and optical pumping and compare this with the measured spectrum, finding a mean absolute percentage error of 3.11%. This high level of agreement allows us to extract the number density and temperature of the $\mathrm{Rb}$ vapor from the two-dimensional spectrum. In the future this technique could be used as an atomic frequency standard for calibrating and characterising a single-photon or low-light-level source.

arXiv:2007.08452•Physical Review Applied•Oct 23, 2020•9 citations

Optically Pumped Atomic Rubidium Lasers: Two-Photon and Exciplex Excitation Mechanisms

Jeffrey Gallagher

Abstract : The Doppler-broadened two-photon absorption (TPA) cross-section for the 52S1/2- 52D5/2 transition in Rb is measured using direct absorption methods. A detailed model of the intensity profile was developed to account for a focused Gaussian beam propagating through a two-photon absorption medium. A peak absorbance of 24% was observed for an intensity of 6.28 kW/cm2 at the focus, a Rb density of 4.6 x 1015 cm-3 concentrations from 1.61-8.52 x 10(15) cm-3 line. Extracting the hyperfine-broadened TPA cross-section from 87 test configurations, while varying the pump power, alkali concentration and focal length, yielded an error weighted average of 6.75x10-21 cm4/W. This cross-section is sufficient for a pulsed dye laser to bleach the pump transition in the Two-Photon Pumped Alkali Laser (TPAL) that lases at 420 nm and 5.2 mum. Additionally, optically pumped atomic rubidium lasers pumped in the blue satellite of the D2 line from the ground Rb-Ar or Rb-Kr collision pair to the dissociative B2 sum 1/2 produce laser emission at 780.2 nm. Lasing is achieved for the Rb-Ar system and 757.1 - 760.4 nm for the Rb-Kr system. Slope efficiencies exceed 0.25% using a heat pipe configuration. The gain is very high with photon build-up times of 1-3.7 ns.

•Jun 1, 2013•2 citations

Optical pumping spectroscopy of Rb vapour with co-propagating laser beams: line identification by a simple theoretical model

Aleksandar J. Krmpot, Mihailo D. Rabasović, Branislav M. Jelenkovic

In this paper the saturation spectra of rubidium vapour at room temperature, obtained with overlapped co-propagating laser beams, were examined. Unlike the standard saturation spectroscopy, here the transmission of the pump laser beam was detected. The pump laser was locked to an atomic transition of the D2 line, while the probe laser frequency was scanned in a wide frequency range. The pump and probe beams had approximately the same intensities; thus the probe laser can saturate transitions and contribute to optical pumping. This, together with Doppler broadening, leads to rich pump transmission spectra, with many lines appearing due to the interaction of lasers with atoms in different velocity groups. The advantages of this method are well-resolved structures and appearance of spectral lines on a flat, Doppler-free background. Agreement between experimental and theoretical results shows the usefulness of this simple model, based on the rate equations, for identification of lines and determination of relative contribution to the observed line intensity from atoms with different velocities. Theoretical spectra are a useful tool for the calibration of experimental spectra obtained by a nonlinear dependence of the laser frequency on the voltage applied to the piezo used for the laser diode frequency scanning.

Journal of Physics B Atomic Molecular and Optical Physics•Jun 14, 2010•5 citations

Frequency-modulation spectroscopy of rubidium atoms with an AlGaAs diode laser

Shunsuke Nakanishi, H. Ariki, Hiroshi Itoh +1 more

Frequency-modulation (FM) spectroscopy has been performed on the D(2) transitions of rubidium atoms with an AlGaAs diode laser at 780 nm. Doppler-broadened hyperfine-structure transitions of (85)Rb and (87)Rb were resolved with no residual amplitude-modulation-induced background signal by modulating the injection current of the laser diode at a low frequency (20-50 MHz) compared with the Doppler width. To obtain Doppler-free spectra, we combined FM spectroscopy with saturation spectroscopy. The results show that the FM spectroscopy technique is sensitive and should be useful for high-resolution spectroscopy, although the resolution was instrument limited and unusual double peaks were observed.

Optics Letters•Nov 1, 1987•10 citations

Effect of optical pumping on alkali-atom Doppler-limited spectra

Thomas Lindvall, Ilkka Juhani Tittonen

Using a three-level model and semiclassical density matrix formalism, we show that optical pumping influences both line positions and amplitudes in Doppler-broadened alkali-atom D1 and D2 spectra for intensities much lower than the two-level atom saturation intensity. The influence on the D2 spectrum is particularly interesting due to the presence of closed hyperfine transitions unaffected by optical pumping. This effect is of importance for example when lasers are frequency stabilized using linear absorption or when the alkali-atom vapour pressure is determined using absorption measurements.

Journal of Modern Optics•Dec 15, 2007•23 citations

Straightforward Measurement of Saturation Intensity of Doppler-Broadened Transitions: Application to Rubidium Vapour

Omid Mozafar, Varun Sharma, R. Margoth Córdova‐Castro +3 more

The commonly quoted saturation intensity of rubidium (Rb) for D2 transitions is 16.7$\mathrm{W}.\mathrm{m}^{-2}$. This value, however, is only accurate for the cycling transition, which renders the Rb atom to resemble a two-level system. In practice, the effective saturation intensity is influenced by various factors, such as the polarization of light, optical pumping, and atom collision which can redistribute the population. As a result, it is crucial to experimentally determine the effective saturation intensity. In this context, we demonstrate a novel yet simple experimental method to measure the effective saturation intensities of Doppler-broadened transitions in atomic vapours. Our method only requires on-resonance absorbance data for various input laser intensities, which can be obtained with a tunable CW laser without the need for precise frequency locking. We applied this method to measure the effective saturation intensities of all four Doppler-broadened D2 transitions in natural rubidium (Rb) vapour (27.8%87Rb and 72.2 %${}^{\text{8}} {}^{\text{5}}Rb$) at$r={35}^{\circ} \mathrm{C}$. The results show that the effective saturation intensities for Rb range from 0.752 to 16.8$\mathrm{W}.\mathrm{m}^{-2}$. Notably, for certain transitions (specifically, repump transitions), the effective saturation intensities were smaller than 16.7 W.$\mathrm{m}^{-2}$(up to an order of magnitude), with potentially important implications for optical pumping in Doppler-broadened transitions.

Photonics North (PN)•May 28, 2024•0 citations
The Diode Pumped Alkali Laser (DPAL) is an optically-pumped three-level laser system with significant promise for scaling to high power. The rates for velocity changing collisions in the rubidium laser have been measured using sub-Doppler laser saturation spectroscopy. Spectra of the F”=2 to F’=1,2,3 hyperfine components of the Rb S1/2 – P3/2 D2 transition were observed for argon pressures of 0-110 mTorr and modulation frequencies of 700 3200 Hz. Sub-Doppler features with linewidths of about 23 MHz, or about four times the natural linewidth, were observed for the hyperfine transitions and cross-over resonances. A Doppler pedestal is also observed which increases with pressures and decreases with modulation frequency. The size of the Doppler pedestal relative to the homogeneous features yields a rate for reversing the direction of all velocity groups of 3.2 x 10 cm s.
We propose and demonstrate pump-probe spectroscopy of rubidium absorption that reveals the sub-Doppler hyperfine structure of the ${}^{5}{\mathrm{S}}_{1/2}\ensuremath{\leftrightarrow}{}^{5}{\mathrm{P}}_{3/2}$ (D2{\mathrm{D}}_{2}D2​) transitions. The counterpropagating pump and probe lasers are independently tunable in frequency, with the probe operating at the single-photon level. The two-dimensional spectrum measured as the laser frequencies are scanned shows fluorescence, Doppler-broadened absorption dips, and sub-Doppler features. The detuning between the pump and probe lasers allows compensation of the Doppler shift for all atomic velocities in the room-temperature vapor, meaning we observe sub-Doppler features for all atoms in the beam. We detail a theoretical model of the system that incorporates fluorescence, saturation effects, and optical pumping and compare this with the measured spectrum, finding a mean absolute percentage error of 3.11%. This high level of agreement allows us to extract the number density and temperature of the Rb\mathrm{Rb}Rb vapor from the two-dimensional spectrum. In the future this technique could be used as an atomic frequency standard for calibrating and characterising a single-photon or low-light-level source.
Abstract : The Doppler-broadened two-photon absorption (TPA) cross-section for the 52S1/2- 52D5/2 transition in Rb is measured using direct absorption methods. A detailed model of the intensity profile was developed to account for a focused Gaussian beam propagating through a two-photon absorption medium. A peak absorbance of 24% was observed for an intensity of 6.28 kW/cm2 at the focus, a Rb density of 4.6 x 1015 cm-3 concentrations from 1.61-8.52 x 10(15) cm-3 line. Extracting the hyperfine-broadened TPA cross-section from 87 test configurations, while varying the pump power, alkali concentration and focal length, yielded an error weighted average of 6.75x10-21 cm4/W. This cross-section is sufficient for a pulsed dye laser to bleach the pump transition in the Two-Photon Pumped Alkali Laser (TPAL) that lases at 420 nm and 5.2 mum. Additionally, optically pumped atomic rubidium lasers pumped in the blue satellite of the D2 line from the ground Rb-Ar or Rb-Kr collision pair to the dissociative B2 sum 1/2 produce laser emission at 780.2 nm. Lasing is achieved for the Rb-Ar system and 757.1 - 760.4 nm for the Rb-Kr system. Slope efficiencies exceed 0.25% using a heat pipe configuration. The gain is very high with photon build-up times of 1-3.7 ns.
In this paper the saturation spectra of rubidium vapour at room temperature, obtained with overlapped co-propagating laser beams, were examined. Unlike the standard saturation spectroscopy, here the transmission of the pump laser beam was detected. The pump laser was locked to an atomic transition of the D2 line, while the probe laser frequency was scanned in a wide frequency range. The pump and probe beams had approximately the same intensities; thus the probe laser can saturate transitions and contribute to optical pumping. This, together with Doppler broadening, leads to rich pump transmission spectra, with many lines appearing due to the interaction of lasers with atoms in different velocity groups. The advantages of this method are well-resolved structures and appearance of spectral lines on a flat, Doppler-free background. Agreement between experimental and theoretical results shows the usefulness of this simple model, based on the rate equations, for identification of lines and determination of relative contribution to the observed line intensity from atoms with different velocities. Theoretical spectra are a useful tool for the calibration of experimental spectra obtained by a nonlinear dependence of the laser frequency on the voltage applied to the piezo used for the laser diode frequency scanning.
Frequency-modulation (FM) spectroscopy has been performed on the D(2) transitions of rubidium atoms with an AlGaAs diode laser at 780 nm. Doppler-broadened hyperfine-structure transitions of (85)Rb and (87)Rb were resolved with no residual amplitude-modulation-induced background signal by modulating the injection current of the laser diode at a low frequency (20-50 MHz) compared with the Doppler width. To obtain Doppler-free spectra, we combined FM spectroscopy with saturation spectroscopy. The results show that the FM spectroscopy technique is sensitive and should be useful for high-resolution spectroscopy, although the resolution was instrument limited and unusual double peaks were observed.
Using a three-level model and semiclassical density matrix formalism, we show that optical pumping influences both line positions and amplitudes in Doppler-broadened alkali-atom D1 and D2 spectra for intensities much lower than the two-level atom saturation intensity. The influence on the D2 spectrum is particularly interesting due to the presence of closed hyperfine transitions unaffected by optical pumping. This effect is of importance for example when lasers are frequency stabilized using linear absorption or when the alkali-atom vapour pressure is determined using absorption measurements.
The commonly quoted saturation intensity of rubidium (Rb) for D2 transitions is 16.7W.m−2\mathrm{W}.\mathrm{m}^{-2}W.m−2. This value, however, is only accurate for the cycling transition, which renders the Rb atom to resemble a two-level system. In practice, the effective saturation intensity is influenced by various factors, such as the polarization of light, optical pumping, and atom collision which can redistribute the population. As a result, it is crucial to experimentally determine the effective saturation intensity. In this context, we demonstrate a novel yet simple experimental method to measure the effective saturation intensities of Doppler-broadened transitions in atomic vapours. Our method only requires on-resonance absorbance data for various input laser intensities, which can be obtained with a tunable CW laser without the need for precise frequency locking. We applied this method to measure the effective saturation intensities of all four Doppler-broadened D2 transitions in natural rubidium (Rb) vapour (27.8%87Rb and 72.2 %85Rb{}^{\text{8}} {}^{\text{5}}Rb85Rb) atr=35∘Cr={35}^{\circ} \mathrm{C}r=35∘C. The results show that the effective saturation intensities for Rb range from 0.752 to 16.8W.m−2\mathrm{W}.\mathrm{m}^{-2}W.m−2. Notably, for certain transitions (specifically, repump transitions), the effective saturation intensities were smaller than 16.7 W.m−2\mathrm{m}^{-2}m−2(up to an order of magnitude), with potentially important implications for optical pumping in Doppler-broadened transitions.