The physical layer security technology is an effective way to reduce information leakage in a wireless communication system. In this paper, we study the physical-layer security of one-way wiretap channel which contains a source-destination pair, an eavesdropper and multiple cooperating relay nodes. What's more, in this channel, there exists direct link between the source and the destination (eavesdropper) and lacks he eavesdropper's channel state information (ECSI). To address its physical-layer security, we proposed a scheme which combines amplify-and-forward (AF)-based relay beamforming and cooperation jamming (CJ) technology. We aim at minimizing the power available for transmitting desired information in relays and optimizing the relay weights under the scenario of limiting the signal to ratio at the destination to a given range, which can be solved by convex optimization techniques. After that, we prove that the optimization results are unique and globally optimum. And the numerical results show that the proposed design can effectively enhance secure transmission rate.
The physical layer security technology is an effective way to reduce information leakage in a wireless communication system. In this paper, we study the physical-layer security of one-way wiretap channel which contains a source-destination pair, an eavesdropper and multiple cooperating relay nodes. What's more, in this channel, there exists direct link between the source and the destination (eavesdropper) and lacks he eavesdropper's channel state information (ECSI). To address its physical-layer security, we proposed a scheme which combines amplify-and-forward (AF)-based relay beamforming and cooperation jamming (CJ) technology. We aim at minimizing the power available for transmitting desired information in relays and optimizing the relay weights under the scenario of limiting the signal to ratio at the destination to a given range, which can be solved by convex optimization techniques. After that, we prove that the optimization results are unique and globally optimum. And the numerical results show that the proposed design can effectively enhance secure transmission rate.
Physical (PHY) layer security approaches for wireless communications can prevent eavesdropping without upper layer data encryption. However, they are hampered by wireless channel conditions: absent feedback, they are typically feasible only when the source-destination channel is better than the source-eavesdropper channel. Node cooperation is a means to overcome this challenge and improve the performance of secure wireless communications. This paper addresses secure communications of one source-destination pair with the help of multiple cooperating relays in the presence of one or more eavesdroppers. Three cooperative schemes are considered: decode-and-forward (DF), amplify-and-forward (AF), and cooperative jamming (CJ). For these schemes, the relays transmit a weighted version of a reencoded noise-free message signal (for DF), a received noisy source signal (for AF), or a common jamming signal (for CJ). Novel system designs are proposed, consisting of the determination of relay weights and the allocation of transmit power, that maximize the achievable secrecy rate subject to a transmit power constraint, or, minimize the transmit power subject to a secrecy rate constraint. For DF in the presence of one eavesdropper, closed-form optimal solutions are derived for the relay weights. For other problems, since the optimal relay weights are difficult to obtain, several criteria are considered leading to suboptimal but simple solutions, i.e., the complete nulling of the message signals at all eavesdroppers (for DF and AF), or the complete nulling of jamming signal at the destination (for CJ). Based on the designed relay weights, for DF in the presence of multiple eavesdroppers, and for CJ in the presence of one eavesdropper, the optimal power allocation is obtained in closed-form; in all other cases the optimal power allocation is obtained via iterative algorithms. Numerical evaluation of the obtained secrecy rate and transmit power results show that the proposed design can significantly improve the performance of secure wireless communications.
The Physical Layer Security (PLS) technology has been proved to be an effective way to reduce information leakage in wireless communication networks. This paper discusses the problem of secure transmission for Amplify-and-Forward (AF) cooperative network which contains both an external eavesdropper and some untrusted relays at the same time, where each relay acts as a helper of transmitting information and a potential eavesdropper. We adopt the technology of Cooperative Jamming (CJ), which yields a significant performance in terms of providing a better level of security against eavesdropping and improving the secure transmission performance of the system. First we discuss the security performance of this new system model, give the secrecy rate in theory and derive a tight lower bound of this secrecy rate. Then we propose a relay selection scheme, which avoids using the channel state information (CSI) of external eavesdropper, to transmit information. Afterward, we also discuss the problem of power allocation in order to maximize the secrecy rate.
In this paper, we propose a destination-assisted jamming and beamforming (DAJB) scheme for physical layer security in a one-way cooperative amplify-and-forward (AF) relay communication system. The system model consists of one source, one destination, one eavesdropper, and N relay nodes, with the individual power constraint of each relay node and the destination-assisted jamming node as well as unknown instantaneous channel state information (CSI) of the eavesdropper. Due to the half-duplex constraint of the relay nodes, there are two phases in our proposed DAJB scheme. In the first phase, the source node broadcasts information signal and all N relay nodes listen simultaneously. In the meantime, the destination node transmits the jamming signal to confuse the potential eavesdropper. In the second phase, all N relay nodes amplify and forward the received signals, covered by the artificial noise (AN), to the destination using the distributed beamforming technology. The optimal beamformer weights and power allocation are obtained by solving the second-order convex cone programming (SOCP) together with a linear programming (LP) problem. Furthermore, the performance of the DAJB scheme is analyzed in terms of the achievable secrecy rate. Compared with the scheme that selects a relay node as the jammer, we obtain larger power gain to achieve higher secrecy rates. Finally, the simulation results verify that the DAJB scheme greatly improves the secrecy rate of a one-way cooperative AF relay communication system.
This paper proposes a new joint cooperative beamforming and jamming (JCBJ) scheme for improving the physical layer security of decode-and-forward wireless networks where a source node transmits to its destination with the aid of multiple intermediate nodes in the presence of an eavesdropper. In the proposed JCBJ scheme, we select the intermediate nodes succeeding in source decoding as the relays to forward the source transmission simultaneously by employing a beamforming weight vector, and meanwhile, use the remaining ones as the friendly jammers to disturb the eavesdropper by sending artificial noise. In order to achieve the secrecy rate maximum, we further study on the power allocation among the source, relays, and jammers under two assumptions of the wiretap link's channel state information. We derive the closed-form optimal solutions by first allocating the transmit power at the source within different ranges to consider all the possible relay selection schemes in which different numbers of relays are employed, and then transforming the multivariable power allocation problem to a set of single-variable optimization subproblems. Our numerical results show the superiority of the proposed JCBJ scheme and the proposed power allocation strategies.
In this letter, we propose a novel scheme to improve physical layer security for amplify-and-forward (AF) relay networks with two-hop information leakage. Unlike traditional joint cooperative beamforming (CB) and cooperative jamming (CJ) design, where mere artificial noise (AN) is exploited by the jammers to degrade eavesdroppers' channels, in our proposed scheme, the jammers send AN along with the confidential signal to simultaneously confuse the eavesdroppers and enhance the quality of received signals at the destination. In particular, the CB vectors and AN covariance matrix are jointly optimized for the relays and jammers under individual power constraints. By decoupling this resultant design problem, suboptimal solutions are obtained using the semidefinite relaxation technique. Simulation results are also provided to demonstrate that the proposed scheme has an obvious advantage in enhancing the secrecy rate.
In this work, physical layer secure transmission of a cooperative wireless communication system over a three-phase amplify-and-forward (AF) two-way relaying channels is studied. A cooperative jamming and multi-antenna relay beamforming scheme that improves physical layer security of the system is proposed. Specifically, it is suggested that in the first and second timeslots when the legitimate users transmit alternatively, a jamming signal can be transmitted by the legitimate party that is not transmitting information-bearing signals This scheme, compared with the approach using a dedicated jammer, achieves a similar jamming effect with reduced complexity. In the third time slot of the protocol, the relay uses two beamforming matrices to process the bidirectional information signals. The jamming signal components at the relay are projected onto the null space of the legitimate relay-destination channels such that they do not affect legitimate communications. Through joint optimization, the sum throughput of the legitimate communication is maximized. In the numerical examples, the proposed scheme is shown to improve the system's secrecy transmission performance.