Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Superconducting CPW resonators for measurements on molecular spins

Ling Zong

Published Jan 1, 2011• 0 citations
OpenAlex

Abstract

Quantum information processing (QIP) concerns communication between qubits in quantum computer. Coplanar waveguide (CPW) resonators which could easily be fabricated with the micro-techniques in integrated circuits started to show its potentiality in QIP in last few years. So far CPW resonators were used to arrange communication between Josephson q-bits which have relatively short decoherence time. The q-bits based on molecular spins mountain quantum coherence for much longer time, but they have too weak coupling to microwave field to allow effective spin manipulation. In this project we aimed to optimize CPW resonators in order to achieve strong coupling to molecular spins. \nWe present results for standard Coplanar Waveguide (CPW) Nb resonators fabricated on sapphire substrate. To achieve strong coupling between microwave field and molecular spins constrictions of the central conductor at the antinode of current were made to get local enhancement of magnetic field. We also present the simulation results for the key design elements: T-junctions and constrictions, which gave a good guideline for design and fabrication. Low temperature measurements of resonators with (and without) local constrictions were made and verified the accuracy of simulations. Finally, we discuss the temperature and power dependence of resonators transmission spectra.

Related papers

Experimental demonstrations of high-Q superconducting coplanar waveguide resonators

HaiJie Li, YiWen Wang, LianFu Wei +6 more

We successfully designed and fabricated an absorption-type of superconducting coplanar waveguide (CPW) resonators. The resonators are made from a niobium film (about 160 nm thick) on a high-resistance Si substrate, and each resonator is fabricated as a meandered quarter-wavelength transmission line (one end is short to the ground and another end is capacitively coupled to a through feedline). With a vector network analyzer we measured the transmissions of the applied microwave through the resonators at ultra-low temperature. The obtained loaded quality factors are significantly high, i.e. up to ∼10 6 . When the temperature increases slowly from the base temperature (20 mK), the resonance frequencies of the resonators are blue shifted and the quality factors are lowered slightly. In principle, this type of device can integrate a series of CPW resonators with a common feedline, making it a promising candidate as the data bus for coupling distant solid-state qubits and the sensitive detector of single photons.

arXiv:1304.3254•Chinese Science Bulletin•Jul 1, 2013•29 citations

Low-loss superconducting aluminum microwave coplanar waveguide resonators on sapphires for the qubit readouts

Qing He, P. H. Ouyang, Haiyan Gao +7 more

Abstract The coplanar waveguide (CPW) microwave resonators have been widely applied for solid-state quantum computation and single-photon detection. Based on the physical analysis for the high fidelity readouts of the qubit(s), in this paper we design and then fabricate accordingly the desired aluminum (Al) film quarter-wavelength resonators on sapphire substrates. The ultra-low temperature measurement results show that the linearity of the internal quality factor under the proper driving power is satisfied well for the high fidelity readouts of the qubit(s); and the phase- and amplitude fractional frequency noises are significantly less for avoiding the potential information false alarms of the detected qubit during the readouts. With the demonstrated qubit-resonator experimental parameters, we argue that the designed and fabricated quarter-wavelength CPW resonators, with optimized parameters, can be used to implement the desired weakly perturbing readout measurements of the solid-state qubits on-chip.

Superconductor Science and Technology•Apr 25, 2022•11 citations

Fabrication and Characterization of Superconductive Coplanar Waveguide Resonators : Fabrication and Characterization of Superconductive Coplanar Waveguide Resonators

Adem Ergül

The objective of this thesis is to evaluate a generic process for fabrication and characterization of the Superconductive coplanar waveguide (CPW) resonators. Superconductive CPW resonators with various lengths and shapes are designed to investigate their electrical and magnetic properties as well as resonance properties and sensitivities. In the first part of thesis, two different models are introduced in order to estimate the nonlinear kinetic inductance of a superconducting CPW resonator. The first model is based on Bean critical-state model and the second one is based on current dependence of London penetration depth. The existence of a shift in resonant frequency of Superconductive CPW resonator caused by a non-linear kinetic inductance is also shown experimentally. Simulations were carried out to estimate the nonlinear kinetic inductance due to the self- induced magnetic field penetration. The rest of the thesis is concerned with development of very smooth Aluminum (Al) thin films with RMS (Root Mean Square) roughness 1~nm and CAD (Computer Aid Design) of superconductive CPW resonators. Experimental investigation of a generic fabrication technique for superconductive CPW resonator is carried out. Many resonators are fabricated with different design parameters, such as centerline or gap width, film thickness and gap capacitors length. The fabrication process is described in detail. Electron Beam Lithography is used to fabricate Nb and Al CPW resonators which are coupled to outer conductors via gap capacitors. We have fabricated GHz frequency CPW resonators with quality factors, Q up 5X10^5.

•Jan 1, 2009•0 citations

Fabrication and Characterization of Superconductive Coplanar Waveguide Resonators

Adem Ergül

The objective of this thesis is to evaluate a generic process for fabrication and characterization of the Superconductive coplanar waveguide (CPW) resonators. Superconductive CPW resonators with various lengths and shapes are designed to investigate their electrical and magnetic properties as well as resonance properties and sensitivities. In the first part of thesis, two different models are introduced in order to estimate the nonlinear kinetic inductance of a superconducting CPW resonator. The first model is based on Bean criticalstate model and the second one is based on current dependence of London penetration depth, λL(I). The existence of a shift in resonant frequency, f0, of Superconductive CPW resonator caused by a non-linear kinetic inductance is also shown experimentally. Simulations were carried out to estimate the nonlinear kinetic inductance due to the selfinduced magnetic field penetration. The rest of the thesis is concerned with development of very smooth Aluminum (Al) thin films with RMS (Root Mean Square) roughness ∼ 1 nm and CAD (Computer Aid Design) of superconductive CPW resonators. Experimental investigation of a generic fabrication technique for superconductive CPW resonator is carried out. Many resonators are fabricated with different design parameters, such as centerline or gap width, film thickness and gap capacitors length. The fabrication process is described in detail. Electron Beam Lithography is used to fabricate Nb and Al CPW resonators which are coupled to outer conductors via gap capacitors. We have fabricated GHz frequency CPW resonators with quality factors, Q up to 5× 10.

•Jan 1, 2009•0 citations

Coupling quantum circuits to magnetic molecular qubits

M. Jenkins

This thesis explores the coupling of magnetic systems to quantum circuits in the context of quantum computing applications. In particular we study the coupling of superconducting coplanar waveguide resonators to Single Molecule Magnets (SMMs) . The combination of approaches from the fields of Cavity Quantum electrodynamics (QED) and Circuit QED with those from the field of molecular magnetism con provide unique opportunities for quantum computing. We investigate the necessary conditions for coupling single spins and spin ensembles to resonators and what characteristics SMMs should have in order to provide interesting alternatives as quantum bits. We present test measurements of several magnetic samples using both broadband spectroscopy with open waveguides and EPR spectroscopy using coplanar waveguide resonators. We also design, fabricate, and test nanometric constrictions in superconducting resonators with the objective of improving their coupling to single spins. We evaluate the performance of these constricted resonators in comparison to unmodified resonators.

arXiv:1507.03579•Jul 13, 2015•0 citations

Co-Planar Waveguide Resonator to Mediate Coupling between Superconducting Quantum Bits

Walid M. Fahmy, Khalid F. A. Hussein, Abd‐El‐Hadi A. Ammar

This paper proposes a design of a coplanar waveguide resonator (CPWR) to integrate two distant superconducting qubits which is a function required for a quantum information system. In this CPWR, the states of one of the super conducting qubits can be moved to and recovered from the other qubit by microwave resonator photons. The superconducting qubits are relatively straightforward to fabricate from materials such as aluminium using electron beam lithography. The superconducting qubits, which are typically a few hundred micrometres in size, are well suited to perform fast quantum logic gate operations. The CPWR highly couples the two qubits through the tightly confined oscillating magnetic field of the resonator microwave photons. It is shown that, in the proposed CPW resonator structure, the microwave photons can mediate coupling between two distant superconducting qubits (21 mm apart) to realize quantum logic gates.

International Conference on Advanced Control Circuits and Systems (ACCS) & International Conference on New Paradigms in Electronics & Information Technology (PEIT)•Nov 1, 2019•0 citations
Quantum information processing (QIP) concerns communication between qubits in quantum computer. Coplanar waveguide (CPW) resonators which could easily be fabricated with the micro-techniques in integrated circuits started to show its potentiality in QIP in last few years. So far CPW resonators were used to arrange communication between Josephson q-bits which have relatively short decoherence time. The q-bits based on molecular spins mountain quantum coherence for much longer time, but they have too weak coupling to microwave field to allow effective spin manipulation. In this project we aimed to optimize CPW resonators in order to achieve strong coupling to molecular spins. \nWe present results for standard Coplanar Waveguide (CPW) Nb resonators fabricated on sapphire substrate. To achieve strong coupling between microwave field and molecular spins constrictions of the central conductor at the antinode of current were made to get local enhancement of magnetic field. We also present the simulation results for the key design elements: T-junctions and constrictions, which gave a good guideline for design and fabrication. Low temperature measurements of resonators with (and without) local constrictions were made and verified the accuracy of simulations. Finally, we discuss the temperature and power dependence of resonators transmission spectra.
We successfully designed and fabricated an absorption-type of superconducting coplanar waveguide (CPW) resonators. The resonators are made from a niobium film (about 160 nm thick) on a high-resistance Si substrate, and each resonator is fabricated as a meandered quarter-wavelength transmission line (one end is short to the ground and another end is capacitively coupled to a through feedline). With a vector network analyzer we measured the transmissions of the applied microwave through the resonators at ultra-low temperature. The obtained loaded quality factors are significantly high, i.e. up to ∼10 6 . When the temperature increases slowly from the base temperature (20 mK), the resonance frequencies of the resonators are blue shifted and the quality factors are lowered slightly. In principle, this type of device can integrate a series of CPW resonators with a common feedline, making it a promising candidate as the data bus for coupling distant solid-state qubits and the sensitive detector of single photons.
Abstract The coplanar waveguide (CPW) microwave resonators have been widely applied for solid-state quantum computation and single-photon detection. Based on the physical analysis for the high fidelity readouts of the qubit(s), in this paper we design and then fabricate accordingly the desired aluminum (Al) film quarter-wavelength resonators on sapphire substrates. The ultra-low temperature measurement results show that the linearity of the internal quality factor under the proper driving power is satisfied well for the high fidelity readouts of the qubit(s); and the phase- and amplitude fractional frequency noises are significantly less for avoiding the potential information false alarms of the detected qubit during the readouts. With the demonstrated qubit-resonator experimental parameters, we argue that the designed and fabricated quarter-wavelength CPW resonators, with optimized parameters, can be used to implement the desired weakly perturbing readout measurements of the solid-state qubits on-chip.
The objective of this thesis is to evaluate a generic process for fabrication and characterization of the Superconductive coplanar waveguide (CPW) resonators. Superconductive CPW resonators with various lengths and shapes are designed to investigate their electrical and magnetic properties as well as resonance properties and sensitivities. In the first part of thesis, two different models are introduced in order to estimate the nonlinear kinetic inductance of a superconducting CPW resonator. The first model is based on Bean critical-state model and the second one is based on current dependence of London penetration depth. The existence of a shift in resonant frequency of Superconductive CPW resonator caused by a non-linear kinetic inductance is also shown experimentally. Simulations were carried out to estimate the nonlinear kinetic inductance due to the self- induced magnetic field penetration. The rest of the thesis is concerned with development of very smooth Aluminum (Al) thin films with RMS (Root Mean Square) roughness 1~nm and CAD (Computer Aid Design) of superconductive CPW resonators. Experimental investigation of a generic fabrication technique for superconductive CPW resonator is carried out. Many resonators are fabricated with different design parameters, such as centerline or gap width, film thickness and gap capacitors length. The fabrication process is described in detail. Electron Beam Lithography is used to fabricate Nb and Al CPW resonators which are coupled to outer conductors via gap capacitors. We have fabricated GHz frequency CPW resonators with quality factors, Q up 5X10^5.
The objective of this thesis is to evaluate a generic process for fabrication and characterization of the Superconductive coplanar waveguide (CPW) resonators. Superconductive CPW resonators with various lengths and shapes are designed to investigate their electrical and magnetic properties as well as resonance properties and sensitivities. In the first part of thesis, two different models are introduced in order to estimate the nonlinear kinetic inductance of a superconducting CPW resonator. The first model is based on Bean criticalstate model and the second one is based on current dependence of London penetration depth, λL(I). The existence of a shift in resonant frequency, f0, of Superconductive CPW resonator caused by a non-linear kinetic inductance is also shown experimentally. Simulations were carried out to estimate the nonlinear kinetic inductance due to the selfinduced magnetic field penetration. The rest of the thesis is concerned with development of very smooth Aluminum (Al) thin films with RMS (Root Mean Square) roughness ∼ 1 nm and CAD (Computer Aid Design) of superconductive CPW resonators. Experimental investigation of a generic fabrication technique for superconductive CPW resonator is carried out. Many resonators are fabricated with different design parameters, such as centerline or gap width, film thickness and gap capacitors length. The fabrication process is described in detail. Electron Beam Lithography is used to fabricate Nb and Al CPW resonators which are coupled to outer conductors via gap capacitors. We have fabricated GHz frequency CPW resonators with quality factors, Q up to 5× 10.
This thesis explores the coupling of magnetic systems to quantum circuits in the context of quantum computing applications. In particular we study the coupling of superconducting coplanar waveguide resonators to Single Molecule Magnets (SMMs) . The combination of approaches from the fields of Cavity Quantum electrodynamics (QED) and Circuit QED with those from the field of molecular magnetism con provide unique opportunities for quantum computing. We investigate the necessary conditions for coupling single spins and spin ensembles to resonators and what characteristics SMMs should have in order to provide interesting alternatives as quantum bits. We present test measurements of several magnetic samples using both broadband spectroscopy with open waveguides and EPR spectroscopy using coplanar waveguide resonators. We also design, fabricate, and test nanometric constrictions in superconducting resonators with the objective of improving their coupling to single spins. We evaluate the performance of these constricted resonators in comparison to unmodified resonators.
This paper proposes a design of a coplanar waveguide resonator (CPWR) to integrate two distant superconducting qubits which is a function required for a quantum information system. In this CPWR, the states of one of the super conducting qubits can be moved to and recovered from the other qubit by microwave resonator photons. The superconducting qubits are relatively straightforward to fabricate from materials such as aluminium using electron beam lithography. The superconducting qubits, which are typically a few hundred micrometres in size, are well suited to perform fast quantum logic gate operations. The CPWR highly couples the two qubits through the tightly confined oscillating magnetic field of the resonator microwave photons. It is shown that, in the proposed CPW resonator structure, the microwave photons can mediate coupling between two distant superconducting qubits (21 mm apart) to realize quantum logic gates.