Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Optics Express

Frequency conversion in silicon in the single photon regime

Bryn A. Bell, Jiakun He, Chunle Xiong, Benjamin J. Eggleton

Published Mar 2, 2016• 29 citations
Publisher

Abstract

Quantum communication networks require single photon frequency converters, whether to shift photons between wavelength channels, to shift photons to the operating wavelength of a quantum memory, or to shift photons of different wavelengths to be of the same wavelength, to enable a quantum interference. Here, we demonstrate frequency conversion of laser pulses attenuated to the single photon regime in an integrated silicon-on-insulator device using four-wave mixing Bragg scattering, with conversion efficiencies of up to 12%, or 32% after correcting for nonlinear loss created by the pump lasers. The frequency shift can be conveniently chosen by tuning of the pump frequencies. We demonstrate that such frequency conversion enables interference between photons at different frequencies.

DOI
10.1364/oe.24.005235

Related papers

Efficient single-photon-level quantum frequency conversion on a silicon nanophotonic chip

Qing Li, Marcelo Davanço, Kartik A. Srinivasan

We demonstrate frequency conversion of single-photon-level signals with an efficiency of 25% and signal-to-noise level >20:1, via four-wave-mixing Bragg scattering in a Si3N4 microring using low power (<20 mW per pump), continuous wave pump lasers.

Conference on Lasers and Electro-Optics•Jan 1, 2015•2 citations

High-efficiency frequency conversion in the single-photon regime

Alex S. Clark, Shayan Shahnia, Matthew J. Collins +2 more

In this Letter we demonstrate frequency conversion in the single-photon regime through Bragg-scattering four-wave mixing with near-unit efficiency in a 750 m long commercially available dispersion-engineered highly nonlinear fiber, where all photons and pump laser frequencies are in the low-loss telecommunications band. We achieve 99.1%±4.9% downconversion and 98.0%±5.0% upconversion of photons by 12 nm using a weak coherent state with an average input of 0.27 photons per detection gate window.

Optics Letters•Mar 11, 2013•66 citations

Silicon quantum photonics for pair photon sources and wavelength conversion

Bryn A. Bell, Jie He, Chunle Xiong +1 more

In this talk, I will discuss two applications of nonlinear quantum photonics in silicon nanowires: correlated photon pair sources and a single-photon wavelength converter. Correlated photon pairs can be generated in a nonlinear silicon waveguide through the spontaneous four-wave mixing (SFWM) process, where two photons from a bright pump laser are annihilated, and a two photons are spontaneously created at different wavelengths (the signal and idler). However, indistinguishable photon pairs are of particular interest for two-photon interference experiments, meaning that the signal and idler should have the same wavelength and be entirely identical to each other. Indistinguishable pairs can be generated with the SFWM process. where two pump lasers create a degenerate signal and idler at the frequency mid-way between them. Since the two photons are indistinguishable, it is not trivial to divide them into separate waveguides so as to manipulate them individually. I will present recent results concerning a silicon quantum splitter, where degenerate pairs are created in a ring resonator which is pumped in both directions. The ring is coupled to a sagnac loop interferometer, which combines the two directions at a 50 : 50 coupler. Here, a quantum interference effect (reverse-Hong Ou Mandel interference) splits the photons to two output waveguides. This device is ultra-compact and the use of a sagnac loop means that the phase is automatically set correctly for the interference. I will also discuss progress on single photon wavelength conversion in silicon nanowires using the four-wave mixing Bragg scattering (FWMBS) process. Here, two intense pump beams are used to modulate a weak signal, causing it to shift to the idler by the frequency difference between the pumps. In principle, this can allow coherent, noiseless frequency conversion of single photon signals. Fig. 1(b) shows output spectra from a 6mm silicon nanowire when the frequency shift is varied 100 GHz to 400 GHz. Multiple peaks are visible, corresponding to up-conversion and down-conversion of the input signal.

Progress in Electromagnetic Research Symposium•Aug 1, 2016•0 citations

Resource-efficient frequency conversion for quantum networks \\via cascaded four-wave mixing

Thomas A. Wright, Charlotte Parry, Oliver R. Gibson +2 more

We report a resource-efficient scheme in which a single pump laser was used to achieve frequency conversion by Bragg-scattering four-wave mixing in a photonic crystal fiber. We demonstrate bidirectional conversion of coherent light between Sr+ P1/2 - D3/2 emission wavelength at 1092 nm and the telecommunication C band with conversion efficiencies of 4.2 % and 37 % for up- and down-conversion, respectively. We discuss how the scheme may be viably scaled to meet the temporal, spectral and polarisation stability requirements of a hybrid light-matter quantum network.

•May 22, 2020•0 citations

Enhanced wavelength conversion and photon pair generation using slow light effects and electronic carrier sweepout in silicon photonics devices

Marc Savanier, Ranjeet Kumar, Shayan Mookherjea

Silicon photonics has drawn a lot of attention over the last decades, mainly in telecom-related application fields where the nonlinear optical properties of silicon are ignored or minimized. However, silicon’s high χ(3) Kerr optical nonlinearity in sub-micron-scale high-confinement waveguides can enable significant improvements in traditional nonlinear devices, such as for wavelength conversion, and also enable some device applications in quantum optics or for quantum key distribution. In order to establish the viability of silicon photonics in practical applications, some big challenges are to improve the optical performance (e.g., optimize nonlinearity or minimize loss) and integration of optics with microelectronics. In this context, we discuss how electronic PIN diodes improve the performance of wavelength conversion in a microring resonator based four-wave mixing device, which achieves a continuous-wave four-wave mixing conversion efficiency of −21.3 dB at 100 mW pump power, with enough bandwidth for the wavelength conversion of a 10 Gbps signal. In the regime of quantum optics, we describe a coupled microring device that can serve as a tunable source of entangled photon pairs at telecommunications wavelengths, operating at room temperature with a low pump power requirement. By controlling either the optical pump wavelength, or the chip temperature, we show that the output bi-photon spectrum can be varied, with implications on the degree of frequency correlation of the generated quantum state.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Mar 10, 2015•0 citations

Telecom-to-visible quantum frequency converter on a silicon nitride chip

Sidarth Raghunathan, Richard C. Oliver, Yun Zhao +4 more

Quantum frequency conversion serves a key role in the realization of hybrid quantum networks by interfacing between wavelength-incompatible platforms. Here we present what is believed to be the first quantum frequency converter connecting visible and telecom domains on a silicon nitride (SiN) chip, using Bragg-scattering four-wave mixing to upconvert heralded single photons from 1260 to 698 nm, which covers a 192 THz span. We examine the noise sources in SiN and devise approaches to suppress noise photons at the source and target frequencies to enable measurements at the single-photon level. We demonstrate an on-chip conversion efficiency of 5% in photon flux and describe design modifications that can be implemented to significantly improve it. Our results pave the way for the implementation of complementary metal-oxide-semiconductor (CMOS)-compatible devices in quantum networks.

arXiv:2505.10338•Optica Quantum•Jun 12, 2025•6 citations
Quantum communication networks require single photon frequency converters, whether to shift photons between wavelength channels, to shift photons to the operating wavelength of a quantum memory, or to shift photons of different wavelengths to be of the same wavelength, to enable a quantum interference. Here, we demonstrate frequency conversion of laser pulses attenuated to the single photon regime in an integrated silicon-on-insulator device using four-wave mixing Bragg scattering, with conversion efficiencies of up to 12%, or 32% after correcting for nonlinear loss created by the pump lasers. The frequency shift can be conveniently chosen by tuning of the pump frequencies. We demonstrate that such frequency conversion enables interference between photons at different frequencies.
In this Letter we demonstrate frequency conversion in the single-photon regime through Bragg-scattering four-wave mixing with near-unit efficiency in a 750 m long commercially available dispersion-engineered highly nonlinear fiber, where all photons and pump laser frequencies are in the low-loss telecommunications band. We achieve 99.1%±4.9% downconversion and 98.0%±5.0% upconversion of photons by 12 nm using a weak coherent state with an average input of 0.27 photons per detection gate window.
In this talk, I will discuss two applications of nonlinear quantum photonics in silicon nanowires: correlated photon pair sources and a single-photon wavelength converter. Correlated photon pairs can be generated in a nonlinear silicon waveguide through the spontaneous four-wave mixing (SFWM) process, where two photons from a bright pump laser are annihilated, and a two photons are spontaneously created at different wavelengths (the signal and idler). However, indistinguishable photon pairs are of particular interest for two-photon interference experiments, meaning that the signal and idler should have the same wavelength and be entirely identical to each other. Indistinguishable pairs can be generated with the SFWM process. where two pump lasers create a degenerate signal and idler at the frequency mid-way between them. Since the two photons are indistinguishable, it is not trivial to divide them into separate waveguides so as to manipulate them individually. I will present recent results concerning a silicon quantum splitter, where degenerate pairs are created in a ring resonator which is pumped in both directions. The ring is coupled to a sagnac loop interferometer, which combines the two directions at a 50 : 50 coupler. Here, a quantum interference effect (reverse-Hong Ou Mandel interference) splits the photons to two output waveguides. This device is ultra-compact and the use of a sagnac loop means that the phase is automatically set correctly for the interference. I will also discuss progress on single photon wavelength conversion in silicon nanowires using the four-wave mixing Bragg scattering (FWMBS) process. Here, two intense pump beams are used to modulate a weak signal, causing it to shift to the idler by the frequency difference between the pumps. In principle, this can allow coherent, noiseless frequency conversion of single photon signals. Fig. 1(b) shows output spectra from a 6mm silicon nanowire when the frequency shift is varied 100 GHz to 400 GHz. Multiple peaks are visible, corresponding to up-conversion and down-conversion of the input signal.
We report a resource-efficient scheme in which a single pump laser was used to achieve frequency conversion by Bragg-scattering four-wave mixing in a photonic crystal fiber. We demonstrate bidirectional conversion of coherent light between Sr+ P1/2 - D3/2 emission wavelength at 1092 nm and the telecommunication C band with conversion efficiencies of 4.2 % and 37 % for up- and down-conversion, respectively. We discuss how the scheme may be viably scaled to meet the temporal, spectral and polarisation stability requirements of a hybrid light-matter quantum network.
Silicon photonics has drawn a lot of attention over the last decades, mainly in telecom-related application fields where the nonlinear optical properties of silicon are ignored or minimized. However, silicon’s high χ(3) Kerr optical nonlinearity in sub-micron-scale high-confinement waveguides can enable significant improvements in traditional nonlinear devices, such as for wavelength conversion, and also enable some device applications in quantum optics or for quantum key distribution. In order to establish the viability of silicon photonics in practical applications, some big challenges are to improve the optical performance (e.g., optimize nonlinearity or minimize loss) and integration of optics with microelectronics. In this context, we discuss how electronic PIN diodes improve the performance of wavelength conversion in a microring resonator based four-wave mixing device, which achieves a continuous-wave four-wave mixing conversion efficiency of −21.3 dB at 100 mW pump power, with enough bandwidth for the wavelength conversion of a 10 Gbps signal. In the regime of quantum optics, we describe a coupled microring device that can serve as a tunable source of entangled photon pairs at telecommunications wavelengths, operating at room temperature with a low pump power requirement. By controlling either the optical pump wavelength, or the chip temperature, we show that the output bi-photon spectrum can be varied, with implications on the degree of frequency correlation of the generated quantum state.
Quantum frequency conversion serves a key role in the realization of hybrid quantum networks by interfacing between wavelength-incompatible platforms. Here we present what is believed to be the first quantum frequency converter connecting visible and telecom domains on a silicon nitride (SiN) chip, using Bragg-scattering four-wave mixing to upconvert heralded single photons from 1260 to 698 nm, which covers a 192 THz span. We examine the noise sources in SiN and devise approaches to suppress noise photons at the source and target frequencies to enable measurements at the single-photon level. We demonstrate an on-chip conversion efficiency of 5% in photon flux and describe design modifications that can be implemented to significantly improve it. Our results pave the way for the implementation of complementary metal-oxide-semiconductor (CMOS)-compatible devices in quantum networks.