In bosonic quantum metrology, the estimate of a loss parameter is typically performed by means of pure states, such as coherent, squeezed or entangled states, while mixed thermal probes are discarded for their inferior performance. Here we show that thermal sources with suitable correlations can be engineered in such a way to approach, or even surpass, the error scaling of coherent states in the presence of general Gaussian decoherence. Our findings pave the way for practical quantum metrology with thermal sources in optical instruments (e.g., photometers) or at different wavelengths (e.g., far infrared, microwave or X-ray) where the generation of quantum features, such as coherence, number states, squeezing or entanglement, may be extremely challenging.
In bosonic quantum metrology, the estimate of a loss parameter is typically performed by means of pure states, such as coherent, squeezed or entangled states, while mixed thermal probes are discarded for their inferior performance. Here we show that thermal sources with suitable correlations can be engineered in such a way to approach, or even surpass, the error scaling of coherent states in the presence of general Gaussian decoherence. Our findings pave the way for practical quantum metrology with thermal sources in optical instruments (e.g., photometers) or at different wavelengths (e.g., far infrared, microwave or X-ray) where the generation of quantum features, such as coherence, number states, squeezing or entanglement, may be extremely challenging.
Abstract In bosonic quantum metrology, the estimate of a loss parameter is typically performed by means of pure states, such as coherent, squeezed or entangled states, while mixed thermal probes are discarded for their inferior performance. Here we show that thermal sources with suitable correlations can be engineered in such a way to approach, or even surpass, the error scaling of coherent states in the presence of general Gaussian decoherence. This decoherence is modeled by including bosonic loss, thermal noise, and even the possibility of environmental correlations, so as to simulate non-Markovian dynamics. Our findings pave the way for practical quantum metrology with thermal sources in optical instruments (e.g., photometers) or at different wavelengths (e.g., far infrared, microwave or x-ray) where the generation of quantum features, such as coherence, squeezing or entanglement, may be extremely challenging.
In this thesis I study optimal strategies to estimate or characterize quantum states and processes (quantum channels). I consider the problem of estimating a phase encoded on a gaussian state. Phase estimation is at the heart of many quantum metrology applications, such as gravitational wave detectors or clock synchronization. I address the problem to the phase estimation fidelity for pure and mixed gaussian states and study how temperature affects the precision of estimation. Although the case of pure states has been studied before, very little is known about estimation in mixed states. The interest in mixed gaussian states relies on the fact that these are the states one has in real experiments with light due to the unavoidable presence of noise. Displaced and squeezed thermal states are studied. For the case of displaced states, I find that fidelity estimation gets worse when the temperature increases. On the contrary, for squeezed thermal states I find the surprising result that a larger temperature yields better estimation. This apparently paradoxical feature, also appears when I derive the estimation accuracy that can be obtained when an asymptotically large number of copies of the state is available. I also study quantum benchmarks that can be applied to a wide variety of protocols, such us quantum storage or quantum teleportation. A very important question in QIT is to know whether a particular quantum protocol can be realized by classical means with the same efficiency. After all, QIT lives from the promise of this quantum advantage. This question becomes specially relevant in experimental (real) implementations of quantum schemes. In real experiments there are always losses and the ideal quantum protocols become imperfect. It is then necessary to assess whether the same experimental result could be obtained by classical (less costly) means. So, for example, in a particular teleportation experiment -which involves generation of entanglement, complicated Bell measurements, fighting decoherence, etc.- one might ask whether one could achieve the same (i.e. mapping the state of a system to a second system located in a different place or time) by measuring the system, transmitting the collected information to the other location, and finally preparing the system accordingly. It is hence of paramount importance to give bounds on the efficiency of these measure and prepare (or entanglement breaking) channels. For this purpose we propose a threshold based on a phase-covariant family of states. Besides of being a family with a straightforward group-theoretical structure, which gives obvious computational advantages, this family is interesting because it can be tested experimentally also in a straightforward way. A crucial feature for the practical use of our benchmark is that it does not require pure (ideal) input states. I finally consider the problem of estimating the parameter of the amplification channel. The amplification channel is interesting by itself but also by the fact that the Hawking-Unruh effect can be formally modeled by it. The Unruh-Hawking effect is a relativistic effect and as such it is hard to measure and detect in current experiments. I investigate whether quantum strategies can provide an improvement over classical protocols in the estimation of the amplification parameter. If the field is inertially prepared in the vacuum one could measure its temperature as detected by a noninertial observer and extract information about the parameter. But I would like to know if the vacuum state is the optimal probe state in an inertial frame for such a task or a better sensitivity could be achieved if the field were in a state of nonzero energy (mean photon number) from an inertial perspective. The aim is to determine the optimal input states, so that, by optimally measuring the output, one can construct an estimator for amplification channel parameter which is unbiased and has the minimum possible variance.
We give the optimal bounds on the phase-estimation precision for mixed Gaussian states in the single-copy and many-copy regimes. Specifically, we focus on displaced thermal and squeezed thermal states. We find that while for displaced thermal states an increase in temperature reduces the estimation fidelity, for squeezed thermal states a larger temperature can enhance the estimation fidelity. The many-copy optimal bounds are compared with the minimum variance achieved by three important single-shot measurement strategies. We show that the single-copy canonical phase measurement does not always attain the optimal bounds in the many-copy scenario. Adaptive homodyning schemes do attain the bounds for displaced thermal states, but for squeezed states they yield fidelities that are insensitive to temperature variations and are, therefore, suboptimal. Finally, we find that heterodyne measurements perform very poorly for pure states but can attain the optimal bounds for sufficiently mixed states. We apply our results to investigate the influence of losses in an optical metrology experiment. In the presence of losses squeezed states cease to provide the Heisenberg limited precision, and their performance is close to that of coherent states with the same mean photon number.
The interferometric power of a bipartite quantum state quantifies the precision, measured by quantum Fisher information, that such a state enables for the estimation of a parameter embedded in a unitary dynamics applied to one subsystem only, in the worst-case scenario where a full knowledge of the generator of the dynamics is not available a priori. For finite-dimensional systems, this quantity was proven to be a faithful measure of quantum correlations beyond entanglement. Here we extend the notion of interferometric power to the technologically relevant setting of optical interferometry with continuous-variable probes. By restricting to Gaussian local dynamics, we obtain a closed formula for the interferometric power of all two-mode Gaussian states. We identify separable and entangled Gaussian states which maximize the interferometric power at fixed mean photon number of the probes and discuss the associated metrological scaling. At fixed entanglement of the probes, highly thermalized states can guarantee considerably larger precision than pure two-mode squeezed states.
Squeezing a quantum state along a specific direction has long been recognized as a crucial technique for enhancing the precision of quantum metrology by reducing parameter uncertainty. However, practical quantum metrology often involves the simultaneous estimation of multiple parameters, necessitating the use of high-quality squeezed states along multiple orthogonal axes to surpass the standard quantum limit for all relevant parameters. In addition, a temporally stabilized squeezed state can provide an event-ready probe for parameters, regardless of the initial state, and robust to the timing of the state preparation process once stabilized. In this work, we generate and stabilize a two-mode squeezed state along two secular motional modes in a vibrating trapped ion with reservoir engineering, despite starting from a thermal state of the motion. Leveraging this resource, we demonstrate an estimation of two simultaneous collective displacements along the squeezed axes, achieving improvements surpassing the classical limit by up to 6.9(3) and 7.0(3) decibels (dB), respectively. Our demonstration can be readily scaled to squeezed states with even more modes. The practical implications of our findings span a wide range of applications, including quantum sensing, quantum imaging, and various fields that demand precise measurements of multiple parameters.
We consider an instance of ``black-box'' quantum metrology in the Gaussian framework, where we aim to estimate the amount of squeezing applied on an input probe, without previous knowledge on the phase of the applied squeezing. By taking the quantum Fisher information (QFI) as the figure of merit, we evaluate its average and variance with respect to this phase in order to identify probe states that yield good precision for many different squeezing directions. We first consider the case of single-mode Gaussian probes with the same energy, and find that pure squeezed states maximize the average quantum Fisher information (AvQFI) at the cost of a performance that oscillates strongly as the squeezing direction is changed. Although the variance can be brought to zero by correlating the probing system with a reference mode, the maximum AvQFI cannot be increased in the same way. A different scenario opens if one takes into account the effects of photon losses: coherent states represent the optimal single-mode choice when losses exceed a certain threshold and, moreover, correlated probes can now yield larger AvQFI values than all single-mode states, on top of having zero variance.