Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:0811.3408 · Physical Review A

Phase estimation for thermal Gaussian states

Mariona Aspachs, John Calsamiglia, R. Muñoz-Tapia, E. Bagán

Published Mar 23, 2009• 85 citations
arXivHTMLPDF

Abstract

We give the optimal bounds on the phase-estimation precision for mixed Gaussian states in the single-copy and many-copy regimes. Specifically, we focus on displaced thermal and squeezed thermal states. We find that while for displaced thermal states an increase in temperature reduces the estimation fidelity, for squeezed thermal states a larger temperature can enhance the estimation fidelity. The many-copy optimal bounds are compared with the minimum variance achieved by three important single-shot measurement strategies. We show that the single-copy canonical phase measurement does not always attain the optimal bounds in the many-copy scenario. Adaptive homodyning schemes do attain the bounds for displaced thermal states, but for squeezed states they yield fidelities that are insensitive to temperature variations and are, therefore, suboptimal. Finally, we find that heterodyne measurements perform very poorly for pure states but can attain the optimal bounds for sufficiently mixed states. We apply our results to investigate the influence of losses in an optical metrology experiment. In the presence of losses squeezed states cease to provide the Heisenberg limited precision, and their performance is close to that of coherent states with the same mean photon number.

DOI
10.1103/physreva.79.033834

Related papers

Quantum accuracy limits and benchmarks in continuous variable systems

Mariona Aspachs

In this thesis I study optimal strategies to estimate or characterize quantum states and processes (quantum channels). I consider the problem of estimating a phase encoded on a gaussian state. Phase estimation is at the heart of many quantum metrology applications, such as gravitational wave detectors or clock synchronization. I address the problem to the phase estimation fidelity for pure and mixed gaussian states and study how temperature affects the precision of estimation. Although the case of pure states has been studied before, very little is known about estimation in mixed states. The interest in mixed gaussian states relies on the fact that these are the states one has in real experiments with light due to the unavoidable presence of noise. Displaced and squeezed thermal states are studied. For the case of displaced states, I find that fidelity estimation gets worse when the temperature increases. On the contrary, for squeezed thermal states I find the surprising result that a larger temperature yields better estimation. This apparently paradoxical feature, also appears when I derive the estimation accuracy that can be obtained when an asymptotically large number of copies of the state is available. I also study quantum benchmarks that can be applied to a wide variety of protocols, such us quantum storage or quantum teleportation. A very important question in QIT is to know whether a particular quantum protocol can be realized by classical means with the same efficiency. After all, QIT lives from the promise of this quantum advantage. This question becomes specially relevant in experimental (real) implementations of quantum schemes. In real experiments there are always losses and the ideal quantum protocols become imperfect. It is then necessary to assess whether the same experimental result could be obtained by classical (less costly) means. So, for example, in a particular teleportation experiment -which involves generation of entanglement, complicated Bell measurements, fighting decoherence, etc.- one might ask whether one could achieve the same (i.e. mapping the state of a system to a second system located in a different place or time) by measuring the system, transmitting the collected information to the other location, and finally preparing the system accordingly. It is hence of paramount importance to give bounds on the efficiency of these measure and prepare (or entanglement breaking) channels. For this purpose we propose a threshold based on a phase-covariant family of states. Besides of being a family with a straightforward group-theoretical structure, which gives obvious computational advantages, this family is interesting because it can be tested experimentally also in a straightforward way. A crucial feature for the practical use of our benchmark is that it does not require pure (ideal) input states. I finally consider the problem of estimating the parameter of the amplification channel. The amplification channel is interesting by itself but also by the fact that the Hawking-Unruh effect can be formally modeled by it. The Unruh-Hawking effect is a relativistic effect and as such it is hard to measure and detect in current experiments. I investigate whether quantum strategies can provide an improvement over classical protocols in the estimation of the amplification parameter. If the field is inertially prepared in the vacuum one could measure its temperature as detected by a noninertial observer and extract information about the parameter. But I would like to know if the vacuum state is the optimal probe state in an inertial frame for such a task or a better sensitivity could be achieved if the field were in a state of nonzero energy (mean photon number) from an inertial perspective. The aim is to determine the optimal input states, so that, by optimally measuring the output, one can construct an estimator for amplification channel parameter which is unbiased and has the minimum possible variance.

•Jan 1, 2011•0 citations

Optimal Gaussian measurements for phase estimation in single-mode Gaussian metrology

Changhun Oh, Changhyoup Lee, Carsten Rockstuhl +4 more

The central issue in quantum parameter estimation is to find out the optimal measurement setup that leads to the ultimate lower bound of an estimation error. We address here a question of whether a Gaussian measurement scheme can achieve the ultimate bound for phase estimation in single-mode Gaussian metrology that exploits single-mode Gaussian probe states in a Gaussian environment. We identify three types of optimal Gaussian measurement setups yielding the maximal Fisher information depending on displacement, squeezing, and thermalization of the probe state. We show that the homodyne measurement attains the ultimate bound for both displaced thermal probe states and squeezed vacuum probe states, whereas for the other single-mode Gaussian probe states, the optimized Gaussian measurement cannot be the optimal setup, although they are sometimes nearly optimal. We then demonstrate that the measurement on the basis of the product quadrature operators XP+PX, i.e., a non-Gaussian measurement, is required to be fully optimal.

•Jan 1, 2019•65 citations

Optimal Gaussian measurements for phase estimation in single-mode Gaussian metrology

Changhun Oh, Changhyoup Lee, Carsten Rockstuhl +4 more

Abstract The central issue in quantum parameter estimation is to find out the optimal measurement setup that leads to the ultimate lower bound of an estimation error. We address here a question of whether a Gaussian measurement scheme can achieve the ultimate bound for phase estimation in single-mode Gaussian metrology that exploits single-mode Gaussian probe states in a Gaussian environment. We identify three types of optimal Gaussian measurement setups yielding the maximal Fisher information depending on displacement, squeezing, and thermalization of the probe state. We show that the homodyne measurement attains the ultimate bound for both displaced thermal probe states and squeezed vacuum probe states, whereas for the other single-mode Gaussian probe states, the optimized Gaussian measurement cannot be the optimal setup, although they are sometimes nearly optimal. We then demonstrate that the measurement on the basis of the product quadrature operators $$\hat X\hat P + \hat P\hat X$$ X ̂ P ̂ + P ̂ X ̂ , i.e., a non-Gaussian measurement, is required to be fully optimal.

arXiv:1805.08495•npj Quantum Information•Jan 28, 2019•81 citations

Full-Period Optical Phase Estimation with Heisenberg Scaling Using Displaced Squeezed States and Gaussian Measurements

Marco A. Rodríguez-García, Luis Medina-Dozal, Francisco E. Becerra

We propose two-stage optimized strategies for full-period optical phase estimation with single-mode Gaussian states and Gaussian measurements under a fixed energy constraint. In the first stage (Stage I), displaced squeezed probes and heterodyne measurements provide coarse localization of the phase to a window on the circle. In the second stage (Stage II), squeezed-vacuum probes with adaptive homodyne measurements perform efficient phase estimation inside the selected window. We derive a generalized Cramér-Rao bound for this family of two-stage Gaussian strategies, which contains the contribution from local parameter estimation in Stage II plus an overshoot penalty from coarse localization errors in Stage I. For E <= 25 photons and squeezing limited to 12 dB, protocols using displaced squeezed states in Stage I reduce the optimized two-stage bound relative to protocols using coherent states in Stage I, and remain within a factor of 3 to 30 of the idealized local squeezed-vacuum quantum Cramér-Rao bound.

quant-pharXiv:2607.02960•Jul 6, 2026•0 citations

Adaptive phase estimation with squeezed thermal light

Adriano Berni, Lars S. Madsen, Mikael Lassen +3 more

Summary form only given. The use of quantum states of light in optical interferometry improves the precision in the estimation of a phase shift, paving the way for applications in quantum metrology, computation and cryptography. Sub-shot noise phase sensing can for example be achieved by injecting a squeezed vacuum into an interferometer . However, this approach leads to enhanced sensitivity only for small phase shifts. In this work we aim for ab initio sub-shot noise estimation of an unknown phase shift using a pre-determined squeezed probe and an adaptive measurement approach. We experimentally investigate the performances of such protocol under the realistic assumption of thermalization of the probe state. Indeed, adaptive phase estimation schemes with squeezed states and Bayesian processing of homodyne data have been shown to be asymptotically optimal in the pure case, thus approaching the quantum Cramér-Rao bound. In our protocol we take advantage of the enhanced sensitivity of homodyne detection in proximity of the optimal phase which maximizes the homodyne Fisher information. A squeezed thermal probe state (signal) undergoes an unknown phase shift. The first estimation step involves interference on a beam splitter of the signal and a local oscillator followed by homodyne detection. Homodyne data is then processed to compute a rough estimation of the phase through Bayesian inference. The rough estimation is fed back to the local oscillator in order to match the optimal relative phase with the signal. A second estimation step leads to the final estimation of the phase shift. Thermalization of the probe state prevents the attainability of the quantum Cramér-Rao bound. Nevertheless, we show that the studied adaptive scheme still saturates the classical Cramér-Rao bound, showing sub-shot noise behaviour and therefore extracting the maximum available information from homodyne data. In contrast to previous approaches, our scheme is optimized for Gaussian states.

Conference on Lasers and Electro-Optics Europe & European Quantum Electronics Conference (CLEO/Europe-EQEC)•May 1, 2013•0 citations

Single-Shot Non-Gaussian Measurements for Optical Phase Estimation

M. T. DiMario, F. E. Becerra

Estimation of the properties of a physical system with minimal uncertainty is a central task in quantum metrology. Optical phase estimation is at the center of many metrological tasks where the value of a physical parameter is mapped to the phase of an electromagnetic field and single-shot measurements of this phase are necessary. While there are measurements able to estimate the phase of light in a single shot with small uncertainties, demonstrations of near-optimal single-shot measurements for an unknown phase of a coherent state remain elusive. Here, we propose and demonstrate strategies for single-shot measurements for ab initio phase estimation of coherent states that surpass the sensitivity limit of heterodyne measurement and approach the Cramer-Rao lower bound for coherent states. These single-shot estimation strategies are based on real-time optimization of coherent displacement operations, single photon counting with photon number resolution, and fast feedback. We show that our demonstration of these optimized estimation strategies surpasses the heterodyne limit for a wide range of optical powers without correcting for detection efficiency with a moderate number of adaptive measurement steps. This is, to our knowledge, the most sensitive single-shot measurement of an unknown phase encoded in optical coherent states.

arXiv:2008.08185•Physical Review Letters•Sep 18, 2020•11 citations
We give the optimal bounds on the phase-estimation precision for mixed Gaussian states in the single-copy and many-copy regimes. Specifically, we focus on displaced thermal and squeezed thermal states. We find that while for displaced thermal states an increase in temperature reduces the estimation fidelity, for squeezed thermal states a larger temperature can enhance the estimation fidelity. The many-copy optimal bounds are compared with the minimum variance achieved by three important single-shot measurement strategies. We show that the single-copy canonical phase measurement does not always attain the optimal bounds in the many-copy scenario. Adaptive homodyning schemes do attain the bounds for displaced thermal states, but for squeezed states they yield fidelities that are insensitive to temperature variations and are, therefore, suboptimal. Finally, we find that heterodyne measurements perform very poorly for pure states but can attain the optimal bounds for sufficiently mixed states. We apply our results to investigate the influence of losses in an optical metrology experiment. In the presence of losses squeezed states cease to provide the Heisenberg limited precision, and their performance is close to that of coherent states with the same mean photon number.
In this thesis I study optimal strategies to estimate or characterize quantum states and processes (quantum channels). I consider the problem of estimating a phase encoded on a gaussian state. Phase estimation is at the heart of many quantum metrology applications, such as gravitational wave detectors or clock synchronization. I address the problem to the phase estimation fidelity for pure and mixed gaussian states and study how temperature affects the precision of estimation. Although the case of pure states has been studied before, very little is known about estimation in mixed states. The interest in mixed gaussian states relies on the fact that these are the states one has in real experiments with light due to the unavoidable presence of noise. Displaced and squeezed thermal states are studied. For the case of displaced states, I find that fidelity estimation gets worse when the temperature increases. On the contrary, for squeezed thermal states I find the surprising result that a larger temperature yields better estimation. This apparently paradoxical feature, also appears when I derive the estimation accuracy that can be obtained when an asymptotically large number of copies of the state is available. I also study quantum benchmarks that can be applied to a wide variety of protocols, such us quantum storage or quantum teleportation. A very important question in QIT is to know whether a particular quantum protocol can be realized by classical means with the same efficiency. After all, QIT lives from the promise of this quantum advantage. This question becomes specially relevant in experimental (real) implementations of quantum schemes. In real experiments there are always losses and the ideal quantum protocols become imperfect. It is then necessary to assess whether the same experimental result could be obtained by classical (less costly) means. So, for example, in a particular teleportation experiment -which involves generation of entanglement, complicated Bell measurements, fighting decoherence, etc.- one might ask whether one could achieve the same (i.e. mapping the state of a system to a second system located in a different place or time) by measuring the system, transmitting the collected information to the other location, and finally preparing the system accordingly. It is hence of paramount importance to give bounds on the efficiency of these measure and prepare (or entanglement breaking) channels. For this purpose we propose a threshold based on a phase-covariant family of states. Besides of being a family with a straightforward group-theoretical structure, which gives obvious computational advantages, this family is interesting because it can be tested experimentally also in a straightforward way. A crucial feature for the practical use of our benchmark is that it does not require pure (ideal) input states. I finally consider the problem of estimating the parameter of the amplification channel. The amplification channel is interesting by itself but also by the fact that the Hawking-Unruh effect can be formally modeled by it. The Unruh-Hawking effect is a relativistic effect and as such it is hard to measure and detect in current experiments. I investigate whether quantum strategies can provide an improvement over classical protocols in the estimation of the amplification parameter. If the field is inertially prepared in the vacuum one could measure its temperature as detected by a noninertial observer and extract information about the parameter. But I would like to know if the vacuum state is the optimal probe state in an inertial frame for such a task or a better sensitivity could be achieved if the field were in a state of nonzero energy (mean photon number) from an inertial perspective. The aim is to determine the optimal input states, so that, by optimally measuring the output, one can construct an estimator for amplification channel parameter which is unbiased and has the minimum possible variance.
The central issue in quantum parameter estimation is to find out the optimal measurement setup that leads to the ultimate lower bound of an estimation error. We address here a question of whether a Gaussian measurement scheme can achieve the ultimate bound for phase estimation in single-mode Gaussian metrology that exploits single-mode Gaussian probe states in a Gaussian environment. We identify three types of optimal Gaussian measurement setups yielding the maximal Fisher information depending on displacement, squeezing, and thermalization of the probe state. We show that the homodyne measurement attains the ultimate bound for both displaced thermal probe states and squeezed vacuum probe states, whereas for the other single-mode Gaussian probe states, the optimized Gaussian measurement cannot be the optimal setup, although they are sometimes nearly optimal. We then demonstrate that the measurement on the basis of the product quadrature operators XP+PX, i.e., a non-Gaussian measurement, is required to be fully optimal.
Abstract The central issue in quantum parameter estimation is to find out the optimal measurement setup that leads to the ultimate lower bound of an estimation error. We address here a question of whether a Gaussian measurement scheme can achieve the ultimate bound for phase estimation in single-mode Gaussian metrology that exploits single-mode Gaussian probe states in a Gaussian environment. We identify three types of optimal Gaussian measurement setups yielding the maximal Fisher information depending on displacement, squeezing, and thermalization of the probe state. We show that the homodyne measurement attains the ultimate bound for both displaced thermal probe states and squeezed vacuum probe states, whereas for the other single-mode Gaussian probe states, the optimized Gaussian measurement cannot be the optimal setup, although they are sometimes nearly optimal. We then demonstrate that the measurement on the basis of the product quadrature operators X^P^+P^X^\hat X\hat P + \hat P\hat XX^P^+P^X^ X ̂ P ̂ + P ̂ X ̂ , i.e., a non-Gaussian measurement, is required to be fully optimal.
We propose two-stage optimized strategies for full-period optical phase estimation with single-mode Gaussian states and Gaussian measurements under a fixed energy constraint. In the first stage (Stage I), displaced squeezed probes and heterodyne measurements provide coarse localization of the phase to a window on the circle. In the second stage (Stage II), squeezed-vacuum probes with adaptive homodyne measurements perform efficient phase estimation inside the selected window. We derive a generalized Cramér-Rao bound for this family of two-stage Gaussian strategies, which contains the contribution from local parameter estimation in Stage II plus an overshoot penalty from coarse localization errors in Stage I. For E <= 25 photons and squeezing limited to 12 dB, protocols using displaced squeezed states in Stage I reduce the optimized two-stage bound relative to protocols using coherent states in Stage I, and remain within a factor of 3 to 30 of the idealized local squeezed-vacuum quantum Cramér-Rao bound.
Summary form only given. The use of quantum states of light in optical interferometry improves the precision in the estimation of a phase shift, paving the way for applications in quantum metrology, computation and cryptography. Sub-shot noise phase sensing can for example be achieved by injecting a squeezed vacuum into an interferometer . However, this approach leads to enhanced sensitivity only for small phase shifts. In this work we aim for ab initio sub-shot noise estimation of an unknown phase shift using a pre-determined squeezed probe and an adaptive measurement approach. We experimentally investigate the performances of such protocol under the realistic assumption of thermalization of the probe state. Indeed, adaptive phase estimation schemes with squeezed states and Bayesian processing of homodyne data have been shown to be asymptotically optimal in the pure case, thus approaching the quantum Cramér-Rao bound. In our protocol we take advantage of the enhanced sensitivity of homodyne detection in proximity of the optimal phase which maximizes the homodyne Fisher information. A squeezed thermal probe state (signal) undergoes an unknown phase shift. The first estimation step involves interference on a beam splitter of the signal and a local oscillator followed by homodyne detection. Homodyne data is then processed to compute a rough estimation of the phase through Bayesian inference. The rough estimation is fed back to the local oscillator in order to match the optimal relative phase with the signal. A second estimation step leads to the final estimation of the phase shift. Thermalization of the probe state prevents the attainability of the quantum Cramér-Rao bound. Nevertheless, we show that the studied adaptive scheme still saturates the classical Cramér-Rao bound, showing sub-shot noise behaviour and therefore extracting the maximum available information from homodyne data. In contrast to previous approaches, our scheme is optimized for Gaussian states.
Estimation of the properties of a physical system with minimal uncertainty is a central task in quantum metrology. Optical phase estimation is at the center of many metrological tasks where the value of a physical parameter is mapped to the phase of an electromagnetic field and single-shot measurements of this phase are necessary. While there are measurements able to estimate the phase of light in a single shot with small uncertainties, demonstrations of near-optimal single-shot measurements for an unknown phase of a coherent state remain elusive. Here, we propose and demonstrate strategies for single-shot measurements for ab initio phase estimation of coherent states that surpass the sensitivity limit of heterodyne measurement and approach the Cramer-Rao lower bound for coherent states. These single-shot estimation strategies are based on real-time optimization of coherent displacement operations, single photon counting with photon number resolution, and fast feedback. We show that our demonstration of these optimized estimation strategies surpasses the heterodyne limit for a wide range of optical powers without correcting for detection efficiency with a moderate number of adaptive measurement steps. This is, to our knowledge, the most sensitive single-shot measurement of an unknown phase encoded in optical coherent states.