We study a microscopic model, the Mirror-Oscillator-Field (MOF) model proposed in [1], for describing optomechanical interactions. In contrast with the conventional approach where the mirror-field interaction is understood as arising from the radiation pressure of an optical field inducing the motion of the mirror’s CoM, the MOF model incorporates the dynamics of the internal degrees of freedom of the mirror that couple to the optical field directly. Considering the mirror’s internal and mechanical degrees of freedom as two separate degrees of freedom we derive the optomechanical properties of the coupled mirror and field system. The major advantage in this approach is that it provides a self-consistent treatment of the three relevant subsystems (the mirror’s motion, its internal degrees of freedom and the field) including their back-actions on each other, thereby giving a more accurate account of the coupled internal and external dynamics. The optical and the mechanical properties of a mirror arising from its dynamical interaction with the field are obtained without imposing any boundary conditions on the field additionally, as is done in the conventional way. We find that our results agree with those from the boundary condition approach in the appropriate limits and more generally the model provides a framework within which one can study optomechanical elements with different internal structures and mechanical properties, which makes it suited for studying hybrid systems. Considering the quantum dynamics of the coupled subsystems we look at the entanglement between the mirror’s motion and the field, showing that the internal degrees of the mirror, in the appropriate parameter regimes, can act as a means to coherently transfer quantum correlations between the field and the mechanics thus leading to a larger optomechanical entanglement. We then use the MOF model to study the entanglement between the motion of an atom and a field for the setup in [95] and find a larger optomechanical entanglement when the field is closer to the internal resonance. We also study the interaction between two mirrors as described by the MOF model, specifically looking at the entanglement between the motion of their centers of mass. Conclusively, we see that including the dynamics of the internal degrees of freedom of a mirror, which is the quintessential mediator of interaction between the mirror center of mass and the field, leads to qualitatively different physics, specifically in the quantum regime, thus giving a physically more complete treatment of mirror-field interactions.
We study a microscopic model, the Mirror-Oscillator-Field (MOF) model proposed in [1], for describing optomechanical interactions. In contrast with the conventional approach where the mirror-field interaction is understood as arising from the radiation pressure of an optical field inducing the motion of the mirror’s CoM, the MOF model incorporates the dynamics of the internal degrees of freedom of the mirror that couple to the optical field directly. Considering the mirror’s internal and mechanical degrees of freedom as two separate degrees of freedom we derive the optomechanical properties of the coupled mirror and field system. The major advantage in this approach is that it provides a self-consistent treatment of the three relevant subsystems (the mirror’s motion, its internal degrees of freedom and the field) including their back-actions on each other, thereby giving a more accurate account of the coupled internal and external dynamics. The optical and the mechanical properties of a mirror arising from its dynamical interaction with the field are obtained without imposing any boundary conditions on the field additionally, as is done in the conventional way. We find that our results agree with those from the boundary condition approach in the appropriate limits and more generally the model provides a framework within which one can study optomechanical elements with different internal structures and mechanical properties, which makes it suited for studying hybrid systems. Considering the quantum dynamics of the coupled subsystems we look at the entanglement between the mirror’s motion and the field, showing that the internal degrees of the mirror, in the appropriate parameter regimes, can act as a means to coherently transfer quantum correlations between the field and the mechanics thus leading to a larger optomechanical entanglement. We then use the MOF model to study the entanglement between the motion of an atom and a field for the setup in [95] and find a larger optomechanical entanglement when the field is closer to the internal resonance. We also study the interaction between two mirrors as described by the MOF model, specifically looking at the entanglement between the motion of their centers of mass. Conclusively, we see that including the dynamics of the internal degrees of freedom of a mirror, which is the quintessential mediator of interaction between the mirror center of mass and the field, leads to qualitatively different physics, specifically in the quantum regime, thus giving a physically more complete treatment of mirror-field interactions.
We use a microscopic model, the mirror-oscillator-field (MOF) model proposed by C. R. Galley, R. O. Behunin, and B. L. Hu [Phys. Rev. A 87, 043832 (2013)], to describe the quantum entanglement between a mirror's center-of-mass (c.m.) motion and a field. In contrast with the conventional approach where the mirror-field entanglement is understood as arising from the radiation pressure of an optical field inducing the motion of the mirror's c.m., the MOF model incorporates the dynamics of the internal degrees of freedom of the mirror that couple to the optical field directly. The major advantage in this approach is that it provides a self-consistent treatment of the three pertinent subsystems (the mirror's c.m. motion, its internal degrees of freedom, and the field) including their back-actions on each other, thereby giving a more accurate account of the quantum correlations between the individual subsystems. The optical and the mechanical properties of a mirror arising from its dynamical interaction with a quantum field are obtained without imposing any boundary conditions on the field additionally, as is done in the conventional way. As one of the new physical features that arise from this self-consistent treatment of the coupled optics and mechanics behavior we observe a coherent transfer of quantum correlations from the field to the mirror via its internal degrees of freedom. We find the quantum entanglement between the optical field and the mirror's center-of-mass motion upon coarse-graining over the internal degree of freedom. Further, we show that in certain parameter regimes the mirror-field entanglement is enhanced when the field interacts resonantly with the mirror's internal degree of freedom, a result which highlights the importance of including the internal structure of the mirror in quantum optomechanical considerations.
This work aims at bringing the microphysics model of quantum optomechanics (QOM) proposed in [1] and developed in [2, 3] one step closer to be applicable to realistic experimental conditions, specifically, for imperfect mirrors, and for real materials. The atom/mirror-oscillator-field (AMOF) model features an internal degree of freedom for a mirror or an atom whose interaction with a quantum field determines the transmission functions of a mirror or the dynamic polarizability of an atom. We study three problems with this model: 1) An imperfect mirror moving in a cavity field, comparing results from the AMOF model with the boundary condition methods; 2) We analyze how well the dynamic polarizability derived from the AMOF model fits the tabulated data at different frequencies. 3) Combining these two parts we analyze the quantum fluctuations induced Casimir-Polder energy between a dilute atom space and a wall. We examine how well we can use the three constituent parameters of the idf oscillator in the AMOF model to match with published results on a meta-stable He* atom near a Au plate and found excellent agreements. These examples show that the AMOF model not only has a sound theoretical structure, because it is based on the microphysics dynamics of the basic constituents, it also has good practical values because it can produce accurate results for certain real materials.
We consider the motion of the end mirror of a cavity inside which a two-level atom trapped. The fast vibrating mirror induces nonlinear couplings between the cavity field and the atom. We analyze this optical effect by showing the population of the atom in its internal degrees of freedom as a function of time. On the other side, fast atom-field variables result in an additional potential for the atomic center-of-mass motion and the mirror vibration, leading to entanglement in the motion and the vibration. The entanglement has been numerically simulated and discussed.
In this paper, we propose a new theoretical scheme for generating a macroscopic Schrödinger cat state of a mechanical oscillator in a hybrid optomechanical system where a beam of two-level atoms passes through the cavity. In the model under consideration, the cavity field couples to the macroscopic mirror through the optomechanical interaction while it couples to the atom through a generalized Jaynes–Cummings interaction that involves the cavity-mode structure. The motion of the mirror modifies the cavity-mode function and therefore modulates the atom-field interaction, leading to the three-mode atom-field-mirror coupling or, equivalently, polariton-mirror coupling in a dressed picture. This interaction induces a controllable anharmonicity in the energy spectrum of the mechanical oscillator, which provides the possibility of generating a superposition of two time-dependent coherent states of the mechanical oscillator just by performing a conditional measurement on the internal states of the atoms exiting the optomechanical cavity. We also investigate the tripartite atom-field-mirror entanglement, which is controllable by adjusting the parameters of the system. In addition, we explore the effects of the mechanical dissipation and thermal noise on the tripartite quantum correlation in the system as well as the generated mechanical superposition state.
This thesis concentrates on generating and measuring non-classical states of mechanical oscillators by coupling them to atomic and molecular quantum systems. We start with a discussion of what novel physics can be explored by mechanical systems operating in the quantum regime. We then discuss one technique making it a possibility- cavity optomechanics, particularly optomechanical cooling. We investigate the limits of optomechanical cooling and review how the coupling of mechanical oscillators to external heat baths limits the minimum attainable phonon occupation number. As a possible alternative for circumventing clamping losses, we consider an all-optical approach where the mechanical element (in this case, a Bragg mirror) is suspended via optical forces, and discuss some limitations of this approach. We explore several schemes aimed at the generation of quantum states in mechanical oscillators. We consider specifically two examples: one in which the mechanical oscillator is coupled to polar molecules via dipole-dipole interaction, and another where it is magnetically coupled to a Bose condensate. The first example emphasizes that such an interaction can generate parametric squeezing and entanglement. The second scheme demonstrates that the back action of BEC spin measurements can be used to generate quantum states of motion of a mechanical oscillator. We then discuss possible methods for measuring the entire density matrix of a mechanical oscillator. The first method achieves the tomographic reconstruction of the mechanical Wigner function by coupling it simultaneously to a classical optical oscillator and a qubit. The second approach involves a state transfer scheme between momentum excitations of a bose-condensate in a cavity and a moving mirror of the cavity that is entirely mediated by the light field. We conclude with a discussion of the broader implications of this work, and some future research directions.
A multipartite quantum system is entangled when its state cannot be factorized into a product of states or a mixture of such products. Quantum information schemes that exploit this purely quantum mechanical feature have been devised initially for systems with two discrete quantum levels (i.e., qubits), and afterward, extended to continuous-variable (CV) systems characterized by observables with continuous spectra, such as the position and momentum of a particle, or the quadratures of an electromagnetic field. Optomechanical systems, such as a driven optical cavity with vibrating end-mirrors or a classical coherent field scattering sidebands off a freely suspended mirror, hold a promise of being candidates for CV quantum information processing applications. As in most other proposals, light is the information carrier; the difference lies in the choice of a micromirror as a quantum storage device. Desired quantum states can be encoded in acoustic modes. The optomechanical coupling, owing to which quantum state transfer between radiation and mirror is possible, is realized via the radiation pressure effect, which consists in momentum transfer between field and mirror during the scattering process. The use of the vibrational modes of a micromirror as a quantum state encoder system is somehow unexpected because this is a macroscopic ensemble of atoms expected to behave rather classically. However, there are proposals that show that, in principle, the vibrational occupation number of even such a large collection of atoms in a solid can be reduced close to zero, which signifies a clear transition from the classical to the quantum regime. Remarkable progress has been made to experimentally cool the resonator by a few orders of magnitude to quite low occupation numbers. However, in order to approach the quantum limit, one needs to integrate small, light, and flexible micromechanical elements into high-finesse cavities (which are typically much more rigid and massive), which is technically challenging. Furthermore, the mechanical quality factor has to be quite high, but present microfabrication techniques yield a mechanical quality factor scaling down for smaller and smaller microresonators. This chapter starts with developing a general framework for treating the dynamics of a driven optical cavity with a vibrating end-mirror system in which two cooling techniques have been recently demonstrated: (i) cold-damping quantum feedback, where the oscillator position is measured through a phase-sensitive detection of the cavity output and the resulting photocurrent is used for a real-time correction of the dynamics, and (ii) backaction or self-cooling, in which the off-resonant operation of the cavity results in a retarded back action on the mechanical system, and hence, in a “self”-modification of its dynamics. The two situations are illustrated in Fig. 24.1. Analytical results for the final phonon number are obtained for both schemes and their applicability within today's state-of-the-art laboratory setups is analyzed.