Quantum Optomechanics with Imperfect Mirrors and Casimir-Polder Effect of Atoms with Different Dynamic Polarizabilities: A Unified Treatment via a Microscopic Model
Bergen Dahl, Bei-Lok Hu
quant-phSubmitted Aug 22, 2026• Announced Aug 25, 2026
This work aims at bringing the microphysics model of quantum optomechanics (QOM) proposed in [1] and developed in [2, 3] one step closer to be applicable to realistic experimental conditions, specifically, for imperfect mirrors, and for real materials. The atom/mirror-oscillator-field (AMOF) model features an internal degree of freedom for a mirror or an atom whose interaction with a quantum field determines the transmission functions of a mirror or the dynamic polarizability of an atom. We study three problems with this model: 1) An imperfect mirror moving in a cavity field, comparing results from the AMOF model with the boundary condition methods; 2) We analyze how well the dynamic polarizability derived from the AMOF model fits the tabulated data at different frequencies. 3) Combining these two parts we analyze the quantum fluctuations induced Casimir-Polder energy between a dilute atom space and a wall. We examine how well we can use the three constituent parameters of the idf oscillator in the AMOF model to match with published results on a meta-stable He* atom near a Au plate and found excellent agreements. These examples show that the AMOF model not only has a sound theoretical structure, because it is based on the microphysics dynamics of the basic constituents, it also has good practical values because it can produce accurate results for certain real materials.
This work aims at bringing the microphysics model of quantum optomechanics (QOM) proposed in [1] and developed in [2, 3] one step closer to be applicable to realistic experimental conditions, specifically, for imperfect mirrors, and for real materials. The atom/mirror-oscillator-field (AMOF) model features an internal degree of freedom for a mirror or an atom whose interaction with a quantum field determines the transmission functions of a mirror or the dynamic polarizability of an atom. We study three problems with this model: 1) An imperfect mirror moving in a cavity field, comparing results from the AMOF model with the boundary condition methods; 2) We analyze how well the dynamic polarizability derived from the AMOF model fits the tabulated data at different frequencies. 3) Combining these two parts we analyze the quantum fluctuations induced Casimir-Polder energy between a dilute atom space and a wall. We examine how well we can use the three constituent parameters of the idf oscillator in the AMOF model to match with published results on a meta-stable He* atom near a Au plate and found excellent agreements. These examples show that the AMOF model not only has a sound theoretical structure, because it is based on the microphysics dynamics of the basic constituents, it also has good practical values because it can produce accurate results for certain real materials.
We study a microscopic model, the Mirror-Oscillator-Field (MOF) model proposed in [1], for describing optomechanical interactions. In contrast with the conventional approach where the mirror-field interaction is understood as arising from the radiation pressure of an optical field inducing the motion of the mirror’s CoM, the MOF model incorporates the dynamics of the internal degrees of freedom of the mirror that couple to the optical field directly. Considering the mirror’s internal and mechanical degrees of freedom as two separate degrees of freedom we derive the optomechanical properties of the coupled mirror and field system. The major advantage in this approach is that it provides a self-consistent treatment of the three relevant subsystems (the mirror’s motion, its internal degrees of freedom and the field) including their back-actions on each other, thereby giving a more accurate account of the coupled internal and external dynamics. The optical and the mechanical properties of a mirror arising from its dynamical interaction with the field are obtained without imposing any boundary conditions on the field additionally, as is done in the conventional way. We find that our results agree with those from the boundary condition approach in the appropriate limits and more generally the model provides a framework within which one can study optomechanical elements with different internal structures and mechanical properties, which makes it suited for studying hybrid systems. Considering the quantum dynamics of the coupled subsystems we look at the entanglement between the mirror’s motion and the field, showing that the internal degrees of the mirror, in the appropriate parameter regimes, can act as a means to coherently transfer quantum correlations between the field and the mechanics thus leading to a larger optomechanical entanglement. We then use the MOF model to study the entanglement between the motion of an atom and a field for the setup in [95] and find a larger optomechanical entanglement when the field is closer to the internal resonance. We also study the interaction between two mirrors as described by the MOF model, specifically looking at the entanglement between the motion of their centers of mass. Conclusively, we see that including the dynamics of the internal degrees of freedom of a mirror, which is the quintessential mediator of interaction between the mirror center of mass and the field, leads to qualitatively different physics, specifically in the quantum regime, thus giving a physically more complete treatment of mirror-field interactions.
We use a microscopic model, the mirror-oscillator-field (MOF) model proposed by C. R. Galley, R. O. Behunin, and B. L. Hu [Phys. Rev. A 87, 043832 (2013)], to describe the quantum entanglement between a mirror's center-of-mass (c.m.) motion and a field. In contrast with the conventional approach where the mirror-field entanglement is understood as arising from the radiation pressure of an optical field inducing the motion of the mirror's c.m., the MOF model incorporates the dynamics of the internal degrees of freedom of the mirror that couple to the optical field directly. The major advantage in this approach is that it provides a self-consistent treatment of the three pertinent subsystems (the mirror's c.m. motion, its internal degrees of freedom, and the field) including their back-actions on each other, thereby giving a more accurate account of the quantum correlations between the individual subsystems. The optical and the mechanical properties of a mirror arising from its dynamical interaction with a quantum field are obtained without imposing any boundary conditions on the field additionally, as is done in the conventional way. As one of the new physical features that arise from this self-consistent treatment of the coupled optics and mechanics behavior we observe a coherent transfer of quantum correlations from the field to the mirror via its internal degrees of freedom. We find the quantum entanglement between the optical field and the mirror's center-of-mass motion upon coarse-graining over the internal degree of freedom. Further, we show that in certain parameter regimes the mirror-field entanglement is enhanced when the field interacts resonantly with the mirror's internal degree of freedom, a result which highlights the importance of including the internal structure of the mirror in quantum optomechanical considerations.
Quantum optomechanics (QOM) explores the interaction between a quantum field, often confined in a cavity, and the quantum motion of mirrors, membranes or material media, usually assumed slow enough with negligible particle production, which is the central concern of dynamical Casimir effects, and a drive laser field for effective control. This rapidly developing field has a wide range of applications, from quantum sensing to the detection of gravitational waves. Because the opto-mechanical coupling is nonlinear, most theoretical investigations assume that the amplitude of mirror motion x remains small. Recent years saw several papers treating x2,x3 orders in the mirror displacement. In our work we take a different route, deploying the functional perturbative method presented in [1] and enriched in [2], applicable for sufficiently weak opto-mechanical couplings. With this we can treat arbitrary displacement of the mirror, not just at a higher order in a power series expansion in x. We first derive the influence action of the quantum field and its non-Markovian noises back-reacting on the moving mirror with self-consistency. From it we derive a nonlinear Langevin equation driven by these back-action noises from the quantum field. We then show how results from our general modeling and treatment can be linked with the models and the Langevin equations presented in the literature, starting with the popular radiation pressure Nx coupling, with N the photon number, up to the recent x3 order results. We hope this new approach and the results presented here can provide useful theoretical support for high precision QOM experimentation in the future.
We investigate the dynamics of Rydberg atoms trapped in front of an oscillating conducting mirror, that can be simulated by a wall with a periodically driven dielectric constant (dynamical mirror). We focus our attention on the probability of atomic excitation due to a dynamical Casimir-Polder effect, related to the near field of the image atom whose distance periodically changes as a consequence of the mirror's motion. The theoretical analysis of this system also aims to an experimental proposal to detect this new dynamical effect exploiting Rydberg atoms trapped in the vicinity of the dynamical mirror. Our results indicate that the number of excited atoms is high enough to allow detection of the dynamical effect.
We study the optomechanical coupling of a oscillating effective mirror with a Rydberg atomic gas, mediated by the dynamical atom-mirror Casimir-Polder force. This coupling may produce a near-field resonant atomic excitation whose probability scales as ∝(d(2)an(4)t)(2)/z(0)(8), where z(0) is the average atom-surface distance, d the atomic dipole moment, a the mirror's effective oscillation amplitude, n the initial principal quantum number, and t the time. We propose an experimental configuration to realize this system with a cold atom gas trapped at a distance ∼2×10 μm from a semiconductor substrate whose dielectric constant is periodically driven by an external laser pulse, hence realizing an effective mechanical mirror motion due to the periodic change of the substrate from transparent to reflecting. For a parabolic gas shape, this effect is predicted to excite about ∼10(2) atoms of a dilute gas of 10(3) trapped Rydberg atoms with n=75 after about 0.5 μs, which is high enough to be detected in typical Rydberg gas experimental conditions.
The 1%-accurate calculations of the van der Waals interaction between an atom and a cavity wall are performed in the separation region from 3nmto150nm. The cases of metastable He∗ and Na atoms near metal, semiconductor, and dielectric walls are considered. Different approximations to the description of wall material and atomic dynamic polarizability are carefully compared. The smooth transition to the Casimir-Polder interaction is verified. It is shown that to obtain accurate results for the atom-wall van der Waals interaction at short separations with an error less than 1% one should use the complete optical-tabulated data for the complex refractive index of the wall material and the accurate dynamic polarizability of an atom. The obtained results may be useful for the theoretical interpretation of recent experiments on quantum reflection and Bose-Einstein condensation of ultracold atoms on or near surfaces of different kinds.