Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IETE Journal of Education

Frequency Modulation by Josephson Device

K. G. Nadar

Published Jan 1, 1979• 0 citations
Publisher

Abstract

The paper presents a review of physics and device concepts of frequency modulation using the Josephson effect. The tunnelling process which is believed to control the variation of electron density across Josephson junction is then discussed together with brief consideration of super-conductivity.
DOI
10.1080/09747338.1979.11450306

Related papers

Nanoelectronic RF Josephson Devices

Peter Russer, Johannes A. Russer

Superconducting RF nanoelectronic devices exhibit a considerable potential for application in future electronics. Josephson effect based devices allow generation, detection, mixing, and parametric amplification of high-frequency signals up into the terahertz region and exhibit high sensitivity, low energy consumption, and small size. Traveling-wave devices can be realized with distributed Josephson junctions. Nonlinear lumped-element circuits can be realized that are small enough so that the circuit dynamics are governed by quantum mechanics. This allows to generate two-photon coherent states and entangled states and will open the door for quantum information processing. Nanotechnological fabrication techniques and the availability of novel materials give a strong impact on the development of novel Josephson-effect-based devices and systems. An overview over the physical principles and the possible applications of nanoelectronic RF Josephson devices is presented.

IEEE Transactions on Microwave Theory and Techniques•Sep 23, 2011•29 citations

Pulse of Josephson junction and control with light

Tianxi Zhang

The Josephson junction is a device and constructed by separating two superconductors with an insulating barrier, which is thin enough so that super-electrons or Cooper pairs, composed of two electrons with opposite momenta and spins, formed by the electron-phonon interaction, and described as probability waves, can quantummechanically tunnel through the barrier and cause superposition and interferences. Due to the quantum e↵ect, a Josephson junction can generate and sustain an indefinitely long direct electric current or potential di↵erence, which becomes alternating one when an external voltage is applied. This paper investigates the Josephson pulse including its generation, property, and control. The results obtained from this study indicate that perturbations of the superconductors can generate strong superconducting pulses in the Josephson junction. The electric potential and field in the barrier oscillate when the two superconductors have di↵erent physical properties including the number densities of super-electrons, the phases of superconductors, and their rates of variations. The oscillations can be harmonic, combined, and purely pulse-like. The strength of the pulse increases with the di↵erences in the rates of densities and phases between the two superconductors. The pulse can be stronger in strength and narrower in width when one superconductor has lower density but higher rates of density and phase than another superconductor. Light or electromagnetic waves can perturb the superconductivities of superconductors and hence can be applied to control the pulses of Josephson junctions.

Quantum Computing, Communication, and Simulation•Jan 24, 2023•0 citations

Superconducting Quantum Interference Devices

Peters, P. N., Holdeman, L. B.

Published document discusses devices which are based on weak-link Josephson elements that join superconductors. Links can take numerous forms, and circuitry utilizing links can perform many varied functions with unprecedented sensitivity. Theoretical review of Josephson's junctions include tunneling junctions, point contact devices, microbridges, and proximity-effect devices.

WORLD SCIENTIFIC eBooks•Jun 24, 2020•2 citations

Application of the Josephson effect to voltage metrology

Samuel P. Benz, C.A. Hamilton

The unique ability of a Josephson junction to control the flow of magnetic flux quanta leads to a perfect relationship between frequency and voltage. Over the last 30 years, metrology laboratories have used this effect to greatly improve the accuracy of dc voltage standards. More recent research is focused on combining the ideas of digital signal processing with quantum voltage pulses to achieve similar gains in ac voltage metrology. The integrated circuits that implement these ideas are the only complex superconducting electronic devices that have found wide commercial application.

Proceedings of the IEEE•Sep 20, 2004•101 citations

THE JOSEPHSON JUNCTION AS A 100 GHz OSCILLATOR-MIXER,

Andrew Longacre, Sidney Shapiro

Abstract : The term 'Josephson effects' refers to a number of unusual properties of current flow through a barrier or weak link between two superconductors. Such a structure--called a Josephson junction--gives rise to frequency conversion effects that suggest its use as an oscillator-mixer in the millimeter and submillimeter region. Such a device would offer high sensitivity, broad bandwidth, tunability, and, in certain modes of operation, the possibility of conversion gain. These frequency conversion effects were observed in the range of 100 GHz to 600 GHz and beyond. The junctions were driven by a 75 GHz or 25 GHz klystron while coupled either to a coaxial cavity resonant at 20 GHz or to a resonance at about 500 GHz associated with the junction structure. Lines in the junction voltage-current characteristic were observed which demonstrated that, at certain values of junction bias, power at the rf--or its harmonics--was converted to power at the resonance frequency. An explanation of the experiment is given together with the necessary background, which provides the basis for a discussion of such operational considerations as upper frequency limit, sensitivity, temperature of operation, and saturation behavior at high signal levels. (Author)

•Apr 1, 1970•1 citation

AC metrology applications of the Josephson effect

Samuel P. Benz, John Biesecker, Charles J. Burroughs +10 more

The performance of programmable voltage signals that exploit the quantum behavior of superconducting Josephson junctions continues to improve and enhance measurements in metrology, communications, and quantum control. We review advances in pulse-driven digital synthesis techniques with Josephson-junction-based devices. Quantum-based synthesis of voltage waveforms has been demonstrated at frequencies up to 3 GHz and rms amplitudes up to 4 V. Josephson pulse generators have also been used to control and characterize superconducting qubits.

Applied Physics Letters•Jul 29, 2024•10 citations
Superconducting RF nanoelectronic devices exhibit a considerable potential for application in future electronics. Josephson effect based devices allow generation, detection, mixing, and parametric amplification of high-frequency signals up into the terahertz region and exhibit high sensitivity, low energy consumption, and small size. Traveling-wave devices can be realized with distributed Josephson junctions. Nonlinear lumped-element circuits can be realized that are small enough so that the circuit dynamics are governed by quantum mechanics. This allows to generate two-photon coherent states and entangled states and will open the door for quantum information processing. Nanotechnological fabrication techniques and the availability of novel materials give a strong impact on the development of novel Josephson-effect-based devices and systems. An overview over the physical principles and the possible applications of nanoelectronic RF Josephson devices is presented.
The Josephson junction is a device and constructed by separating two superconductors with an insulating barrier, which is thin enough so that super-electrons or Cooper pairs, composed of two electrons with opposite momenta and spins, formed by the electron-phonon interaction, and described as probability waves, can quantummechanically tunnel through the barrier and cause superposition and interferences. Due to the quantum e↵ect, a Josephson junction can generate and sustain an indefinitely long direct electric current or potential di↵erence, which becomes alternating one when an external voltage is applied. This paper investigates the Josephson pulse including its generation, property, and control. The results obtained from this study indicate that perturbations of the superconductors can generate strong superconducting pulses in the Josephson junction. The electric potential and field in the barrier oscillate when the two superconductors have di↵erent physical properties including the number densities of super-electrons, the phases of superconductors, and their rates of variations. The oscillations can be harmonic, combined, and purely pulse-like. The strength of the pulse increases with the di↵erences in the rates of densities and phases between the two superconductors. The pulse can be stronger in strength and narrower in width when one superconductor has lower density but higher rates of density and phase than another superconductor. Light or electromagnetic waves can perturb the superconductivities of superconductors and hence can be applied to control the pulses of Josephson junctions.
The unique ability of a Josephson junction to control the flow of magnetic flux quanta leads to a perfect relationship between frequency and voltage. Over the last 30 years, metrology laboratories have used this effect to greatly improve the accuracy of dc voltage standards. More recent research is focused on combining the ideas of digital signal processing with quantum voltage pulses to achieve similar gains in ac voltage metrology. The integrated circuits that implement these ideas are the only complex superconducting electronic devices that have found wide commercial application.
Abstract : The term 'Josephson effects' refers to a number of unusual properties of current flow through a barrier or weak link between two superconductors. Such a structure--called a Josephson junction--gives rise to frequency conversion effects that suggest its use as an oscillator-mixer in the millimeter and submillimeter region. Such a device would offer high sensitivity, broad bandwidth, tunability, and, in certain modes of operation, the possibility of conversion gain. These frequency conversion effects were observed in the range of 100 GHz to 600 GHz and beyond. The junctions were driven by a 75 GHz or 25 GHz klystron while coupled either to a coaxial cavity resonant at 20 GHz or to a resonance at about 500 GHz associated with the junction structure. Lines in the junction voltage-current characteristic were observed which demonstrated that, at certain values of junction bias, power at the rf--or its harmonics--was converted to power at the resonance frequency. An explanation of the experiment is given together with the necessary background, which provides the basis for a discussion of such operational considerations as upper frequency limit, sensitivity, temperature of operation, and saturation behavior at high signal levels. (Author)
The performance of programmable voltage signals that exploit the quantum behavior of superconducting Josephson junctions continues to improve and enhance measurements in metrology, communications, and quantum control. We review advances in pulse-driven digital synthesis techniques with Josephson-junction-based devices. Quantum-based synthesis of voltage waveforms has been demonstrated at frequencies up to 3 GHz and rms amplitudes up to 4 V. Josephson pulse generators have also been used to control and characterize superconducting qubits.