Feedback control in classical systems is an indispensable, ubiquitous tool. The theoretical basis for achieving optimal classical control is well understood, and crucially relies on a very classical assumption: that measurements of the state of a system under control need not perturb that state. In a quantum context this assumption is fundamentally invalid. Although many aspects of the theory of quantum feedback control are relatively well developed, the technological basis for feedback control of a single quantum system has only very recently matured. We demonstrate the experimental realization of a quantum feedback control protocol, perpetually stabilizing the coherent Rabi oscillations of a superconducting qubit. This is the first utilization of quantum feedback control for stabilizing a dynamical process, and the first application of quantum feedback in a solid-state system of any kind. This demonstration comprises the first half of this thesis. The feedback protocol is predicated on the ability to make high-fidelity quantum measurements, which are enabled by quantum-limited Josephson parametric amplifiers (JPAs). The design and realization of the novel Josephson traveling-wave parametric amplifier (JTWPA) comprises the second half of this thesis. The JTWPA achieves order-of-magnitude improvements over state of the art JPAs in bandwidth and signal power handling while providing quantum-limited noise performance, potentially enabling the simultaneous readout of dozens of superconducting qubits and the generation of broadband multi-mode squeezing in the microwave domain.
Feedback control in classical systems is an indispensable, ubiquitous tool. The theoretical basis for achieving optimal classical control is well understood, and crucially relies on a very classical assumption: that measurements of the state of a system under control need not perturb that state. In a quantum context this assumption is fundamentally invalid. Although many aspects of the theory of quantum feedback control are relatively well developed, the technological basis for feedback control of a single quantum system has only very recently matured. We demonstrate the experimental realization of a quantum feedback control protocol, perpetually stabilizing the coherent Rabi oscillations of a superconducting qubit. This is the first utilization of quantum feedback control for stabilizing a dynamical process, and the first application of quantum feedback in a solid-state system of any kind. This demonstration comprises the first half of this thesis. The feedback protocol is predicated on the ability to make high-fidelity quantum measurements, which are enabled by quantum-limited Josephson parametric amplifiers (JPAs). The design and realization of the novel Josephson traveling-wave parametric amplifier (JTWPA) comprises the second half of this thesis. The JTWPA achieves order-of-magnitude improvements over state of the art JPAs in bandwidth and signal power handling while providing quantum-limited noise performance, potentially enabling the simultaneous readout of dozens of superconducting qubits and the generation of broadband multi-mode squeezing in the microwave domain.
Feedback control in classical systems is an indispensable, ubiquitous tool. The theoretical basis for achieving optimal classical control is well understood, and crucially relies on a very classical assumption: that measurements of the state of a system under control need not perturb that state. In a quantum context this assumption is fundamentally invalid. Although many aspects of the theory of quantum feedback control are relatively well developed, the technological basis for feedback control of a single quantum system has only very recently matured. We demonstrate the experimental realization of a quantum feedback control protocol, perpetually stabilizing the coherent Rabi oscillations of a superconducting qubit. This is the first utilization of quantum feedback control for stabilizing a dynamical process, and the first application of quantum feedback in a solid-state system of any kind. This demonstration comprises the first half of this thesis. The feedback protocol is predicated on the ability to make high-fidelity quantum measurements, which are enabled by quantum-limited Josephson parametric amplifiers (JPAs). The design and realization of the novel Josephson traveling-wave parametric amplifier (JTWPA) comprises the second half of this thesis. The JTWPA achieves order-of-magnitude improvements over state of the art JPAs in bandwidth and signal power handling while providing quantum-limited noise performance, potentially enabling the simultaneous readout of dozens of superconducting qubits and the generation of broadband multi-mode squeezing in the microwave domain.
Advancing error-corrected quantum computing and fundamental science necessitates quantum-limited amplifiers with near-ideal quantum efficiency and multiplexing capability. However, existing solutions achieve one at the expense of the other; for example, Josephson traveling wave parametric amplifiers (JTWPAs) are highgain, broadband, and chip-based quantum amplifiers that conventionally incur a bandwidth-noise tradeoff. When operated at 20-dB gain and instantaneous bandwidths of a few GHz, JTWPAs typically reach near-quantum limited intrinsic efficiencies of 70% - 85% relative to that of an ideal phase-preserving quantum amplifier. This is due to information leakage to the sidebands of the JTWPA, which can be recovered by adiabatically transforming the input modes to Floquet modes of the system within the device. In this thesis, we experimentally demonstrate the first Floquet-mode travelingwave parametric amplifier (Floquet TWPA). Fabricated in a superconducting qubit process, this Floquet TWPA achieves minimal dissipation, quantum-limited noise performance, and broadband operation. Our device exhibits > 20-dB amplification over a 3-GHz instantaneous bandwidth, <0.5 -dB average in-band insertion loss, and the highest-reported intrinsic quantum efficiency for a TWPA of 92.1±7.6%, relative to an ideal phase-preserving amplifier. When measuring a superconducting qubit, our Floquet TWPA enables a system measurement efficiency of 65.1 ± 5.8%, the highest-reported in a superconducting qubit readout experiment utilizing phase-preserving amplifiers to the best of our knowledge. Finally, we discuss the noise limitations of our current experimental setup, as well as impedance matching strategies that will enable us to push towards ideal JTWPA performance. These general-purpose Floquet TWPAs are suitable for fast, high-fidelity multiplexed readout in large-scale quantum systems and future monolithic integration with quantum processors.
Bringing signals from quantum to classical, from few-photon to many-photon levels for further processing, is a common challenge in rising quantum technologies. These include quantum computing, quantum communication, quantum sensing, radio astronomy, and dark matter searches, typically operating at microwave frequencies and millikelvin temperatures. Superconducting parametric amplifiers, as the first piece in the readout chain, have become a cornerstone of these technologies, since they offer unrivaled noise performance near the quantum-mechanical limit and high gain to surpass the noise of subsequent amplifiers. A notable implementation is the Josephson traveling-wave parametric amplifier (TWPA), which stands out due to its bandwidth of several Gigahertz and high saturation power, often larger than -100 dBm. These key properties come at the cost of complexity in design and fabrication: TWPA metamaterials often contain several thousands of Josephson junctions. Designing high-gain TWPAs involves three major challenges: ensuring impedance-matching, phase-matching of parametric amplification, and suppressing unwanted processes, all achievable through sub-wavelength dispersion engineering. This thesis covers the circuit design and analysis, implementation, and experimental characterization of a dispersion-engineered TWPA based on radio-frequency superconducting interference devices (rf-SQUIDs). It focuses on a detailed investigation of dispersion-engineering techniques and their effects on amplifier performance, particularly through the use of time-domain circuit simulations to analyze the multimode dynamics of the circuit. The experimentally realized device features 18 dB of gain, an instantaneous bandwidth spanning from 2.2 to 6.7 GHz, a system noise of 2.5 quanta, and a saturation power of (−86.5 ± 4.0) dBm. With these characteristics, it is suitable for frequency-multiplexed readout of detector arrays or qubits. Its high saturation power, about 10 dB higher than other reported Josephson-junction-based TWPAs, allows increasing the number of qubits per readout line, or decreasing the intermodulation between frequency-multiplexed qubits, both crucial for scaling up quantum computation.
Recent progress in physics has increased the necessity for ultra-low noise amplifiers capable of operating at the quantum limit performance. These amplifiers are essential to enhance astronomical detection, dark-matter search, and qubit readout in quantum computing, among other applications. Superconducting Josephson junction Travelling Wave Parametric Amplifiers (JTWPAs) operated in the microwave range, have demonstrated high gain over several gigahertz (GHz) bandwidth, with quantum-limited noise performance and minimal heat dissipation. These excellent properties make JTWPAs an ideal solution for ultra-low noise amplification. This thesis delves into the design, fabrication and characterisation of JTWPAs operated in the microwave (1-16 GHz) and the W-band (70-115GHz) regimes. A generalised coupled-mode equations (CME) framework describing JTWPAs based on Josephson junctions and DC superconducting quantum interference devices (SQUIDs) is introduced. This framework can be combined with electromagnetic (EM) simulation softwares to model the JTWPAs, facilitating their design. It is therefore used to model two microwave JTWPA designs, using parallel plate capacitors (PPCs) and interdigitated capacitors (IDCs). The fabrication and characterisation of both designs are presented, and possible fabrication and design issues are carefully discussed. Despite these issues, we observed broadband gain in the JTWPA with PPCs, achieving > 20 dB gain at several frequency points, and a measured P1dB = −95.8dBm when operated at 17.3 dB. The RF properties of a 500-junction Josephson array are also presented in this manuscript. The device creates a Fabry-Perot cavity, leading to non-travelling wave parametric effects, such as narrow-band gain. We also observed indications of efficient phase-sensitive amplification. The thesis is concluded with the first — to the best of our knowledge — experimental attempt to extend the operational frequency of a JTWPA to the W-band. The novel design, fabrication techniques and characterisation of the W-band JTWPA are discussed in detail in this manuscript, leading to promising results suggesting that JTWPA could operate at high frequencies.
In order to build a large-scale quantum computer, one of the requirements is high-fidelity
multiplexed qubit readout, which in turn relies on the use of ultralow-noise
amplifiers. While Josephson Parametric Amplifiers (JPAs), using a cavity with
few Josephson junctions, have shown promising results for single qubit readout,
they have limitations such as low saturation power and a gain-bandwidth product
restriction. This makes them less suited for frequency multiplexed qubit readout. A
current-pumped Josephson Travelling-Wave Parametric Amplifier (JTWPA), using
4-wave mixing in a lumped-element transmission line, features both high saturation
power as well as no restriction on large bandwidth and high gain. This is possible
due to multiple junctions and the lack of a cavity. However, also this current pumped
JTWPA has an inherent problem, namely phase mismatch between the pump and
the signal. This prevents exponential gain. In this thesis, a current pumped JTWPA
using the resonant phase matching (RPM) technique to reduce the phase mismatch
problem is studied and characterised. The JTWPA shows high gain, high saturation
power and a large signal-to-noise ratio improvement. The JTWPA is also used for
qubit readout, for which it clearly improves the readout fidelity.
Josephson junction based parametric amplifiers are used to read out the state of superconducting qubits with high fidelity. These amplifiers are themselves superconducting circuits operating at temperatures of tens of millikelvin. A version of this type of amplifier which has exhibited large bandwidth and saturation power is the Josephson traveling wave parametric amplifier (JTWPA). One particular JTWPA topology consists of hundreds to thousands of Josephson junctions in a transmission line configuration along with periodic phase matching resonators to increase gain. Here, we look at using a superconducting qubit fabrication process to realize this circuit To analyze the sensitivity of the JTWPA to fabrication process variation, we discuss a linear model for the circuit which takes into account unit cell to unit cell variation. To extract the measured circuit values, we use in-situ measurements of a JTWPA to compare the designed values to the realized values. Finally we discuss preliminary results realizing an example JTWPA design using a fabrication process designed for superconducting qubits.