Self-cooling of a Micro-mechanical Resonator by Lorentz Force

Y. D. Wang, Kouishi Semba, Hiroshi Yamaguchi

Published Apr 19, 2007• 0 citations

Abstract

Using a semi-classical approach, we describe an on-chip cooling protocol for a micro-mechanical resonator by employing a superconducting flux qubit. A Lorentz force, generated by the passive back-action of the resonator's displacement, can cool down the thermal motion of the mechanical resonator by applying an appropriate microwave drive to the qubit. We show that this onchip cooling protocol, with well-controlled cooling power and a tunable response time of passive back-action, can be highly efficient. With feasible experimental parameters, the effective mode temperature of a resonator could be cooled down by several orders of magnitude.

Related papers

Cooling of a micro-mechanical resonator by the back-action of Lorentz force

Ying-Dan Wang, Kouichi Semba, Hiroshi Yamaguchi

Using a semi-classical approach, we describe an on-chip cooling protocol for a micro-mechanical resonator by employing a superconducting flux qubit. A Lorentz force, generated by the passive back-action of the resonator's displacement, can cool down the thermal motion of the mechanical resonator by applying an appropriate microwave drive to the qubit. We show that this on-chip cooling protocol, with well-controlled cooling power and a tunable response time of passive back-action, can be highly efficient. With feasible experimental parameters, the effective mode temperature of a resonator could be cooled down by several orders of magnitude.

arXiv:0704.2462New Journal of PhysicsApr 1, 200832 citations

Cooling a micromechanical resonator by quantum back-action from a noisy qubit

Ying-Dan Wang, Yong Li, Fei Xue +2 more

We study the role of qubit dephasing in cooling a mechanical resonator by quantum back-action. With a superconducting flux qubit as a specific example, we show that ground-state cooling of a mechanical resonator can only be realized if the qubit dephasing rate is sufficiently low.

arXiv:0812.0261Physical Review BOct 6, 200927 citations

Coupling a Flux-Tunable Resonator to a Magnetically Levitated Superconducting Microparticle

Achintya Paradkar

Magnetically levitated superconducting microparticles provide a promising platform for fundamental quantum experiments and quantum-limited sensing. In the Meissner state, the levitated particle is trapped without mechanical clamping, allowing its center-of-mass motion to exhibit ultralow dissipation. The particle's displacement can be read out dispersively via magnetic flux coupling to superconducting resonators. A challenge for magnetomechanical coupling is to realize a flux-tunable microwave circuit that provides strong flux-to-frequency transduction, low dissipation, and a sufficiently large linear operating range for readout and cooling. This thesis develops and characterizes a chip-based superconducting platform for realizing this transduction.Chip-based levitation of a superconducting microparticle is demonstrated at 40 mK. Passive cryogenic vibration isolation is developed to increase the mechanical quality factors of the levitated particle. For coupling to a microwave circuit, a superconducting flip-chip process based on indium microspheres was developed. The need for Au passivation of Nb or NbN under-bump metallization is demonstrated, and indium-based superconducting interconnects are shown to carry ampere-scale currents. Flux-tunable resonators with 100-200 µm SQUID loops and integrated input coils are designed, fabricated, and characterized. A peak flux responsivity of 20 GHz/Φ₀ is achieved, with one flux quantum modulation requiring only 10-20 µA of input-coil current. Two integrated flux-biasing architectures are developed with flip-chip and on-chip input coils, achieving a total flux transfer efficiency of 1.6%. Junction asymmetry is shown to suppress branch-switching behavior associated with finite SQUID screening.Together, these results establish the superconducting subsystems required for dispersive microwave readout of the center-of-mass motion of a levitated microparticle. Such a magnetomechanical coupling provides a route toward cooling the center-of-mass motion to the ground state, paving the way for the preparation of nonclassical motional states. More broadly, such systems are well-suited for quantum-limited force and acceleration sensing, as well as for probing quantum physics in a previously unexplored mass regime.

Apr 13, 20260 citations

Cooling a micromechanical beam by coupling it to a transmission line

Fei Xue, Y. D. Wang, Yu-xi Liu +1 more

We study a method to cool down the vibration mode of a micromechanical beam using a capacitively coupled superconducting transmission line. The Coulomb force between the transmission line and the beam is determined by the driving microwave on the transmission line and the displacement of the beam. When the frequency of the driving microwave is smaller than that of the transmission line resonator, the Coulomb force can oppose the velocity of the beam. Thus, the beam can be cooled. This mechanism, which may enable us to prepare the beam in its quantum ground state of vibration, is feasible under current experimental conditions.

arXiv:0706.3100Physical Review BNov 1, 200760 citations

Quantum-Limited Mechanical Resonator Measurement And Back-Action Cooling To Near The Quantum Ground State

Tristan O. Rocheleau

For decades, quantum mechanics has been a hugely successful theory for understanding the microscopic world. Despite its seemingly non-physical predictions, such as superposition or cat states, the accuracy of the theory has been verified time and again for microscopic systems composed of single atoms or other quantum particles. Up till now, however, our understanding of how and if these quantum predictions scale to larger systems closer to our everyday perceptions, where we do not see quantum "weirdness", is an open question. One platform to pursue observation of quantum effects in a system composed of large ensembles of atoms rather than single particles is that of nanomechanical resonators. Several schemes have been proposed to observe quantum effects in these systems, eg [1],[41], but a common feature is the requirement that the mechanical resonator be at or near its quantum ground state, which has proved challenging to achieve. In this dissertation, a novel mechanical motion readout scheme using superconducting resonators is presented and shown to allow near quantum limited detection. In any strong measurement of a system, quantum mechanics dictates that the measurement will inherently produce some "back-action" on the measured system. It will be shown that for the measurement system presented, back-action forces can additionally be used to cool a single mode of a mechanical resonator to near its quantum ground state, with the lowest observed occu- pation factor at 3.8 ±1.3 quanta. This is a low enough occupation level that the nanoresonator is in its ground state statistically 21% of the time and opens up the possibility of preforming further quantum experiments. The system investigated in this dissertation is composed of a nanoscale mechanical resonator capacitively coupled to a superconducting coplanar waveguide resonator. The resonators were nanofabricated on a silicon substrate and cooled to low temperature in a dilution refrigerator system. Applying microwave signals to the device and measuring output spectra provided the means to both observe the mechanical motion and produce the back-action forces.

Jan 31, 20111 citation

Coupled Dynamics of a Nanomechanical Resonator and Superconducting Quantum Circuits

Junho Suh

The coupled dynamics of a nanomechanical resonator and superconducting quantum circuits are studied in three experiments, in the context of studying the quantum limit for force detection and quantum physics of macroscopic objects. In the first experiment, the dispersive mechanical resonance shift from the interaction with a Cooper-pair box qubit is studied. The measured coupling strength is large enough to satisfy one of the conditions required to perform many of the proposed quantum nanomechanical measurements. The resonance shift also probes the microwave-driven response of the qubit, showing Rabi oscillation and Landau-Zener tunneling, proving the coherent dynamics of the qubit. Second, the parametric excitation of nanomechanical motion is studied via experiments with a driven qubit. Degenerate parametric amplification and oscillation are demonstrated, with a new observation of nonlinear dissipation. The squeezing of the back-action noise from the detection amplifier is also observed, up to 4dB. It is the first demonstration using a qubit as an auxiliary system to modify the nanomechanical dynamics, showing a possible route for generation of nanomechanical quantum states. Finally, back-action cooling of nanomechanical motion has been investigated, which is implemented by capacitively coupling a high-Q coplanar waveguide microwave resonator to a nanomechanical resonator. The thermal state with 7.5 mechanical quanta on average is reached, a result that is ultimately limited due to increased bath heating with microwave power. The heating is consistent with a model based on two-level systems resonantly coupled to the nanomechanical mode. This additional heating suggests future efforts to improve coupling and for reducing two-level system density in materials employed to reach the motional ground state via back-action cooling.

May 17, 20111 citation