Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Chinese Journal of Physics

Loading and Compression of a Large Number of Rubidium Atoms Using a Semi-Dark Type Magneto-Optical Trap

Lan‐Sheng Yang, Bai-Tzeng Han, De-Sheng Hong, Tarek Ali Mohamed, D. J. Han

Published Dec 1, 2007• 3 citations
OpenAlex

Abstract

We have built an apparatus for setting up a double magneto-optical trap (double MOT) which allows more than 10 Rb atoms to be loaded in 15 seconds. This compact system consists mainly of a stainless steel chamber and a homemade glass cell. The two chambers are spatially separated by a small diameter transfer tube for differential pumping. The stainless steel chamber is maintained at a pressure of 10 Torr, enabling fast capturing of background Rb atoms. The optically cooled atomic clouds are pushed by a laser beam towards the glass cell which is in a much higher vacuum. Under this condition, the glass cell provides a rather long life time for holding the atoms. After the atoms are loaded in the temporarily bright MOT, a semi-dark type MOT compression is employed to reach a spatial density of 1×10 atoms/cm. The compressed atom clouds are further cooled by polarization gradient cooling to a temperature of 30 μK. The high phase space density cloud is suitable for experiments related to ultracold atoms.

Related papers

Realization of High Optical Density Rb Magneto-optical Trap

Yanxu Han, Liu Y, Chunhong Zhang +2 more

We report experimental demonstration of a magneto-optical trap (MOT) of Rb atoms with a high optical density. With 2.2-cm-diameter cooling laser beams, we achieve an optical density of nearly 11 for about 2.6 × 10 10 trapped Rb atoms with the beam intensity of about 6.6 mW/cm per beam. The temperature of the cold atoms is about 250 μK. Furthermore, by ramping the magnetic field gradient from 8 G/cm to about 20 G/cm, the atomic cloud in the MOT is compressed and the optical density is up to 16.

Chinese Physics Letters•Feb 1, 2009•3 citations

Compact magneto-optical trap for rubidium atoms

P. L. Chapovsky

The characteristics of a magneto-optical trap (MOT) using small-diameter cooling laser beams are considered. Trapping and cooling of Rb atoms from the surrounding gas of warm atoms takes place in the trap. A compact (140 μm) and stable atomic cloud is obtained with a density of 7 × 10 10 cm −3 , which is three orders of magnitude higher than the density of the surrounding gas.

Journal of Experimental and Theoretical Physics•May 1, 2005•1 citation

High-flux cold Li 6 and Rb 87 atoms from compact two-dimensional magneto-optical traps

Yun-Xuan Lu, An-Wei Zhu, Christine Frank +2 more

Integrating two chemically distinct atomic species into a miniaturized, high-flux cold-atom source is a key challenge for modern experiments with ultracold atomic mixtures and polar molecules. Here, we report a compact setup with in-series two-dimensional magneto-optical traps (2D MOTs) that provides high-flux cold lithium and rubidium atoms. Thanks to the efficient short-distance Zeeman slowing, the maximum 3D MOT loading rate of lithium atoms reaches a record value of 6.6 × 10 9 atoms/s at a moderate lithium-oven temperature of 372 degrees Celsius, which is 44 times higher than that without the Zeeman slowing light. The flux of rubidium is also as high as 2.3 × 10 9 atoms/s with the rubidium oven held at room temperature. Meanwhile, the entire vacuum-chamber system, including an ultra-high-vacuum science cell, is within a small volume of 65 × 55 × 70 cm 3 . Our work represents a substantial improvement over traditional bulky and complex dual-species cold-atom setups. It provides a good starting point for the fast production of a double-degenerate lithium-rubidium atomic mixture and large samples of ultracold lithium-rubidium ground-state molecules.

arXiv:2512.24177•Physical Review A•Apr 16, 2026•0 citations

Optimization of Transfer of Cold Atoms From TwoDimensional Magneto Optical Trap to ThreeDimensional Magneto Optical Trap

Tirumalasetty Panduranga Mahesh, Nobuyuki Takei Supervisors Dr. Kenji Ohmori, Ayan Banerjee

This thesis reports on the generation of MOT for laser cooling and trapping of Rubidium 87 atoms. Probe-pump technique have been used in Rb gas cell and doppler free absorption peaks has been observed. Peak at the crossover frequency will be locked for laser cooling and repump beams. This locked freuqency used in MOT to trap Rb atoms. The technique of optical molasses is used to cool the atoms and quadrupole magnetic field applied to confine or trap atoms at the center of MOT. Two chambers are constructed for 2D and 3D MOT with different pressure. Rb atoms loaded efficiently from the high flux cold atom beam generated in a compact 2D MOT. This is the first step of Bose Einstein Condensate (BEC). A performance of 2D MOT was tested by another main chamber of 3D MOT contains 3 pairs of counter-propagating beams. Over 5x10⁶ atoms trapped in a 3D MOT with loading rate of 1:8x10⁶ atoms/sec. This experiment provided an excellent starting point for future experiment on Rydberg atoms in dense ultracold quantum gases.

•Apr 1, 2018•0 citations

A compact system for ultracold atoms

Lara Torralbo-Campo

This thesis describes the design, construction and optimisation of two compact \nsetups to produce ⁸⁷Rb Bose-Einstein condensates and dual ⁷Li-⁸⁷Rb Magneto-Optical Traps (MOTs). The motivation for compact systems is to have simplified \nsystems to cool the atoms. The first experimental setup is based on a single pyrex \nglass cell without the need for atom chips. Fast evaporation will be achieved in a hybrid trap comprising of a magnetic quadrupole trap and an optical dipole trap \ncreated by a Nd:YVO4 laser and with future plans of using a Spatial Light Modulator \n(SLM). To enhance an efficient and rapid evaporation, we have investigated Light-Induced Atomic Desorption (LIAD) to modulate the Rb partial pressure during the cooling and trapping stage. With this technique, a ⁸⁷Rb MOT of 7 x 10⁷ atoms was loaded by shining violet light from a LED source into the glass cell, whose walls are coated with rubidium atoms. The atoms were then cooled by optical molasses and then loaded into a magnetic trap where lifetime measurements demonstrated that LIAD improves on magnetically-trapped atoms loaded from constant background pressure by a factor of six. This is quite encouraging and opens the possibility to do a rapid evaporation. In a second experiment, we have designed a compact system based on a stainless steel chamber to trap either ⁷Li or ⁶Li atoms in a MOT loaded from alkali-metal dispensers without the need of conventional oven-Zeeman slower. This setup can also load ⁸⁷Rb atoms, allowing future projects to simultaneously produce degenerate quantum gases of bosonic ⁸⁷Rb and fermionic ⁶Li atoms.

•Nov 30, 2012•0 citations

Magneto-optical trap loaded from a low-velocity intense source

Chang Yong Park, Myung Sim Jun, D. Cho

With a vapor-cell magneto-optical trap (VCMOT) atoms are trapped directly from the equilibrium vapor at room temperature without the complication of a precooling stage. The background vapor, however, can also be a source of energetic atoms hitting and ejecting those atoms already trapped. The background collision limits trap confinement time /spl tau/ and consequently the total number N of atoms trapped in a VCMOT. In order to have large /spl tau/ and N without losing the convenience and simplicity of a VCMOT, double MOT systems were built. In such a system there is a VCMOT with a usual background vapor pressure, and connected to it is another MOT without the vapor. The VCMOT captures atoms and transfers them to the second MOT through a long tube. The tube provides the constriction to maintain the pressure difference between the two MOT chambers. For the second MOT there is a steady supply of slow atoms without the complication of the background vapor, and it can hold a large number of atoms for a long time. Such systems were successfully used for a Bose Einstein condensation experiment and to study cold collisions.

Conference on Lasers and Electro-Optics Pacific Rim (CLEO-PR)•Jan 20, 2003•0 citations
We have built an apparatus for setting up a double magneto-optical trap (double MOT) which allows more than 10 Rb atoms to be loaded in 15 seconds. This compact system consists mainly of a stainless steel chamber and a homemade glass cell. The two chambers are spatially separated by a small diameter transfer tube for differential pumping. The stainless steel chamber is maintained at a pressure of 10 Torr, enabling fast capturing of background Rb atoms. The optically cooled atomic clouds are pushed by a laser beam towards the glass cell which is in a much higher vacuum. Under this condition, the glass cell provides a rather long life time for holding the atoms. After the atoms are loaded in the temporarily bright MOT, a semi-dark type MOT compression is employed to reach a spatial density of 1×10 atoms/cm. The compressed atom clouds are further cooled by polarization gradient cooling to a temperature of 30 μK. The high phase space density cloud is suitable for experiments related to ultracold atoms.
Integrating two chemically distinct atomic species into a miniaturized, high-flux cold-atom source is a key challenge for modern experiments with ultracold atomic mixtures and polar molecules. Here, we report a compact setup with in-series two-dimensional magneto-optical traps (2D MOTs) that provides high-flux cold lithium and rubidium atoms. Thanks to the efficient short-distance Zeeman slowing, the maximum 3D MOT loading rate of lithium atoms reaches a record value of 6.6 × 10 9 atoms/s at a moderate lithium-oven temperature of 372 degrees Celsius, which is 44 times higher than that without the Zeeman slowing light. The flux of rubidium is also as high as 2.3 × 10 9 atoms/s with the rubidium oven held at room temperature. Meanwhile, the entire vacuum-chamber system, including an ultra-high-vacuum science cell, is within a small volume of 65 × 55 × 70 cm 3 . Our work represents a substantial improvement over traditional bulky and complex dual-species cold-atom setups. It provides a good starting point for the fast production of a double-degenerate lithium-rubidium atomic mixture and large samples of ultracold lithium-rubidium ground-state molecules.
This thesis reports on the generation of MOT for laser cooling and trapping of Rubidium 87 atoms. Probe-pump technique have been used in Rb gas cell and doppler free absorption peaks has been observed. Peak at the crossover frequency will be locked for laser cooling and repump beams. This locked freuqency used in MOT to trap Rb atoms. The technique of optical molasses is used to cool the atoms and quadrupole magnetic field applied to confine or trap atoms at the center of MOT. Two chambers are constructed for 2D and 3D MOT with different pressure. Rb atoms loaded efficiently from the high flux cold atom beam generated in a compact 2D MOT. This is the first step of Bose Einstein Condensate (BEC). A performance of 2D MOT was tested by another main chamber of 3D MOT contains 3 pairs of counter-propagating beams. Over 5x10⁶ atoms trapped in a 3D MOT with loading rate of 1:8x10⁶ atoms/sec. This experiment provided an excellent starting point for future experiment on Rydberg atoms in dense ultracold quantum gases.
This thesis describes the design, construction and optimisation of two compact \nsetups to produce ⁸⁷Rb Bose-Einstein condensates and dual ⁷Li-⁸⁷Rb Magneto-Optical Traps (MOTs). The motivation for compact systems is to have simplified \nsystems to cool the atoms. The first experimental setup is based on a single pyrex \nglass cell without the need for atom chips. Fast evaporation will be achieved in a hybrid trap comprising of a magnetic quadrupole trap and an optical dipole trap \ncreated by a Nd:YVO4 laser and with future plans of using a Spatial Light Modulator \n(SLM). To enhance an efficient and rapid evaporation, we have investigated Light-Induced Atomic Desorption (LIAD) to modulate the Rb partial pressure during the cooling and trapping stage. With this technique, a ⁸⁷Rb MOT of 7 x 10⁷ atoms was loaded by shining violet light from a LED source into the glass cell, whose walls are coated with rubidium atoms. The atoms were then cooled by optical molasses and then loaded into a magnetic trap where lifetime measurements demonstrated that LIAD improves on magnetically-trapped atoms loaded from constant background pressure by a factor of six. This is quite encouraging and opens the possibility to do a rapid evaporation. In a second experiment, we have designed a compact system based on a stainless steel chamber to trap either ⁷Li or ⁶Li atoms in a MOT loaded from alkali-metal dispensers without the need of conventional oven-Zeeman slower. This setup can also load ⁸⁷Rb atoms, allowing future projects to simultaneously produce degenerate quantum gases of bosonic ⁸⁷Rb and fermionic ⁶Li atoms.
With a vapor-cell magneto-optical trap (VCMOT) atoms are trapped directly from the equilibrium vapor at room temperature without the complication of a precooling stage. The background vapor, however, can also be a source of energetic atoms hitting and ejecting those atoms already trapped. The background collision limits trap confinement time /spl tau/ and consequently the total number N of atoms trapped in a VCMOT. In order to have large /spl tau/ and N without losing the convenience and simplicity of a VCMOT, double MOT systems were built. In such a system there is a VCMOT with a usual background vapor pressure, and connected to it is another MOT without the vapor. The VCMOT captures atoms and transfers them to the second MOT through a long tube. The tube provides the constriction to maintain the pressure difference between the two MOT chambers. For the second MOT there is a steady supply of slow atoms without the complication of the background vapor, and it can hold a large number of atoms for a long time. Such systems were successfully used for a Bose Einstein condensation experiment and to study cold collisions.