Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1611.08960 · Physical Review A

Loading of atoms into an optical trap with high initial phase-space density

Kosuke Shibata, Shota Yonekawa, 賢 東條

Published Jul 5, 2017• 8 citations
arXivHTMLPDF

Abstract

We report a method for loading cold atoms into an optical trap with high initial phase-space density (PSD). When the trap beam is overlapped with atoms in optical molasses of optimized parameters including large cooling beam detuning compared with conventional detuning used for a magneto-optical trap (MOT), more than $3\ifmmode\times\else\texttimes\fi{}{10}^{6}$ rubidium atoms with an initial temperature less than 20 $\ensuremath{\mu}\mathrm{K}$ are loaded into a single beam trap. The obtained maximum initial PSD is estimated to be $1.1\ifmmode\times\else\texttimes\fi{}{10}^{\ensuremath{-}3}$, which is one or two orders of magnitude greater than that achieved with the conventional loading into an optical trap from atoms in a MOT. The proposed method is promising for creating a quantum gas with a large number of atoms in a short evaporation time.

DOI
10.1103/physreva.96.013402

Related papers

Evaporative Cooling of Atoms to Quantum Degeneracy in an Optical Dipole Trap

Saptarishi Chaudhuri, Sanjukta Roy, C. S. Unnikrishnan

We discuss our experimental results on forced evaporative cooling of cold rubidium 87 Rb atoms to quantum degeneracy in an Optical Dipole Trap. The atoms are first trapped and cooled in a magneto-optical trap (MOT) loaded from a continuous beam of cold atoms [1]. More than 10 10 atoms are trapped in the MOT and then about 10 8 atoms are transferred to a Quasi-Electrostatic Trap (QUEST) formed by tightly focused CO2 laser (λ = 10.6μ m ) beams intersecting at their foci in an orthogonal configuration in the horizontal plane. Before loading the atoms into the dipole trap, the phase-space density of the atomic ensemble was increased making use of sub-doppler cooling at large detuning and the temporal dark MOT technique. In a MOT the phase-space density of the atomic ensemble is six orders of magnitude less than what is required to achieve quantum degeneracy. After transferring atoms into the dipole trap efficiently, phase-space density increases by a factor of 10 3 . Further increase in phase-space density to quantum degeneracy is achieved by forced evaporative cooling of atoms in the dipole trap. The evaporative cooling process involves a gradual reduction of the trap depth by ramping down the trapping laser intensity over a second. The temperature of the cold atomic cloud was measured by time-of-flight (TOF) technique. The spatial distribution of the atoms is measured using absorption imaging. We report results of evaporative cooling in a single beam and in a crossed double-beam dipole traps. Due to the large initial phase space density, and large initial number of atoms trapped, the quantum phase transition occurs after about 600 ms of evaporative cooling in our optimized crossed dipole trap.

Journal of Physics Conference Series•Sep 1, 2007•12 citations

Loading and Compression of a Large Number of Rubidium Atoms Using a Semi-Dark Type Magneto-Optical Trap

Lan‐Sheng Yang, Bai-Tzeng Han, De-Sheng Hong +2 more

We have built an apparatus for setting up a double magneto-optical trap (double MOT) which allows more than 10 Rb atoms to be loaded in 15 seconds. This compact system consists mainly of a stainless steel chamber and a homemade glass cell. The two chambers are spatially separated by a small diameter transfer tube for differential pumping. The stainless steel chamber is maintained at a pressure of 10 Torr, enabling fast capturing of background Rb atoms. The optically cooled atomic clouds are pushed by a laser beam towards the glass cell which is in a much higher vacuum. Under this condition, the glass cell provides a rather long life time for holding the atoms. After the atoms are loaded in the temporarily bright MOT, a semi-dark type MOT compression is employed to reach a spatial density of 1×10 atoms/cm. The compressed atom clouds are further cooled by polarization gradient cooling to a temperature of 30 μK. The high phase space density cloud is suitable for experiments related to ultracold atoms.

Chinese Journal of Physics•Dec 1, 2007•3 citations

High Density Loading and Collisional Loss of Laser-Cooled Molecules in an Optical Trap

Varun Jorapur, Thomas Langin, Qian Wang +2 more

We report optical trapping of laser-cooled molecules at sufficient density to observe molecule-molecule collisions for the first time in a bulk gas. SrF molecules from a red-detuned magneto-optical trap (MOT) are compressed and cooled in a blue-detuned MOT. Roughly 30% of these molecules are loaded into an optical dipole trap with peak number density n_{0}≈3×10^{10} cm^{-3} and temperature T≈40 μK. We observe two-body loss with rate coefficient β=2.7_{-0.8}^{+1.2}×10^{-10} cm^{3} s^{-1}. Achieving this density and temperature opens a path to evaporative cooling towards quantum degeneracy of laser-cooled molecules.

arXiv:2307.05347•Physical Review Letters•Apr 18, 2024•28 citations

Atomic quantum systems in optical micro-structures

Müther, T., Nes, J., Gehrmann, A-L. +5 more

We present experiments with cold atoms in optical dipole potentials which are directed towards developing an integrated coherent atom optics with micro-optical systems. We describe an experiment on evaporative cooling in a far-detuned optical dipole trap for ⁸⁷Rb. The dipole trap is created by a solid state laser at a wavelength of 1030 nm. To achieve high initial phase space densities allowing for efficient evaporative cooling, we have optimised the loading process from a magneto-optical trap into the dipole trap. Starting with an initial phase space density of 2 × 10⁻⁴ the trap depth was ramped down and temperatures below 200 nK and phase space densities of about 0.2 could be reached. These investigations aim at the creation of an ’all-optical’ BEC based on a simple experimental scheme. As an example for an integrated atom optical system, we present the transport of atoms in a ring-shaped guiding structure, i.e. optical storage ring, for cold atoms which is produced by a micro-fabricated ring lens.

•Jan 1, 2005•0 citations

Loading an optical dipole trap

S. J. M. Kuppens, Kristan L. Corwin, Kurt W. Miller +2 more

We present a detailed experimental study of the physics involved in transferring atoms from a magneto-optical trap (MOT) to an optical dipole trap. The loading is a dynamical process determined by a loading rate and a density dependent loss rate. The loading rate depends on cooling and the flux of atoms into the trapping volume, and the loss rate is due to excited state collisions induced by the MOT light fields. From this study we found ways to optimize the loading of the optical dipole trap. Key ingredients for maximum loading are found to be a reduction of the hyperfine repump intensity, increased detuning of the MOT light, and a displacement of the optical dipole trap center with respect to the MOT. A factor of 2 increase in the number of loaded atoms is demonstrated by using a hyperfine repump beam with a shadow in it. In this way we load $8\ifmmode\times\else\texttimes\fi{}{10}^{6}{}^{85}\mathrm{Rb}$ atoms into a 1 mK deep optical dipole trap with a waist of $58 \ensuremath{\mu}\mathrm{m},$ which is 40% of the atoms initially trapped in the MOT.

Physical Review A•Jun 13, 2000•185 citations

Improved atom number with a dual color magneto—optical trap

Qiang Cao, Xinyu Luo, Kui-Yi Gao +3 more

We demonstrate a novel dual color magneto—optical trap (MOT), which uses two sets of overlapping laser beams to cool and trap 87 Rb atoms. The volume of cold cloud in the dual color MOT is strongly dependent on the frequency difference of the laser beams and can be significantly larger than that in the normal MOT with single frequency MOT beams. Our experiment shows that the dual color MOT has the same loading rate as the normal MOT, but much longer loading time, leading to threefold increase in the number of trapped atoms. This indicates that the larger number is caused by reduced light induced loss. The dual color MOT is very useful in experiments where both high vacuum level and large atom number are required, such as single chamber quantum memory and Bose—Einstein condensation (BEC) experiments. Compared to the popular dark spontaneous-force optical trap (dark SPOT) technique, our approach is technically simpler and more suitable to low power laser systems.

Chinese Physics B•Apr 1, 2012•7 citations
We report a method for loading cold atoms into an optical trap with high initial phase-space density (PSD). When the trap beam is overlapped with atoms in optical molasses of optimized parameters including large cooling beam detuning compared with conventional detuning used for a magneto-optical trap (MOT), more than 3\ifmmode×\else\texttimes\fi1063\ifmmode\times\else\texttimes\fi{}{10}^{6}3\ifmmode×\else\texttimes\fi106 rubidium atoms with an initial temperature less than 20 \ensuremathμK\ensuremath{\mu}\mathrm{K}\ensuremathμK are loaded into a single beam trap. The obtained maximum initial PSD is estimated to be 1.1\ifmmode×\else\texttimes\fi10\ensuremath−31.1\ifmmode\times\else\texttimes\fi{}{10}^{\ensuremath{-}3}1.1\ifmmode×\else\texttimes\fi10\ensuremath−3, which is one or two orders of magnitude greater than that achieved with the conventional loading into an optical trap from atoms in a MOT. The proposed method is promising for creating a quantum gas with a large number of atoms in a short evaporation time.
We discuss our experimental results on forced evaporative cooling of cold rubidium 87 Rb atoms to quantum degeneracy in an Optical Dipole Trap. The atoms are first trapped and cooled in a magneto-optical trap (MOT) loaded from a continuous beam of cold atoms [1]. More than 10 10 atoms are trapped in the MOT and then about 10 8 atoms are transferred to a Quasi-Electrostatic Trap (QUEST) formed by tightly focused CO2 laser (λ = 10.6μ m ) beams intersecting at their foci in an orthogonal configuration in the horizontal plane. Before loading the atoms into the dipole trap, the phase-space density of the atomic ensemble was increased making use of sub-doppler cooling at large detuning and the temporal dark MOT technique. In a MOT the phase-space density of the atomic ensemble is six orders of magnitude less than what is required to achieve quantum degeneracy. After transferring atoms into the dipole trap efficiently, phase-space density increases by a factor of 10 3 . Further increase in phase-space density to quantum degeneracy is achieved by forced evaporative cooling of atoms in the dipole trap. The evaporative cooling process involves a gradual reduction of the trap depth by ramping down the trapping laser intensity over a second. The temperature of the cold atomic cloud was measured by time-of-flight (TOF) technique. The spatial distribution of the atoms is measured using absorption imaging. We report results of evaporative cooling in a single beam and in a crossed double-beam dipole traps. Due to the large initial phase space density, and large initial number of atoms trapped, the quantum phase transition occurs after about 600 ms of evaporative cooling in our optimized crossed dipole trap.
We have built an apparatus for setting up a double magneto-optical trap (double MOT) which allows more than 10 Rb atoms to be loaded in 15 seconds. This compact system consists mainly of a stainless steel chamber and a homemade glass cell. The two chambers are spatially separated by a small diameter transfer tube for differential pumping. The stainless steel chamber is maintained at a pressure of 10 Torr, enabling fast capturing of background Rb atoms. The optically cooled atomic clouds are pushed by a laser beam towards the glass cell which is in a much higher vacuum. Under this condition, the glass cell provides a rather long life time for holding the atoms. After the atoms are loaded in the temporarily bright MOT, a semi-dark type MOT compression is employed to reach a spatial density of 1×10 atoms/cm. The compressed atom clouds are further cooled by polarization gradient cooling to a temperature of 30 μK. The high phase space density cloud is suitable for experiments related to ultracold atoms.
We report optical trapping of laser-cooled molecules at sufficient density to observe molecule-molecule collisions for the first time in a bulk gas. SrF molecules from a red-detuned magneto-optical trap (MOT) are compressed and cooled in a blue-detuned MOT. Roughly 30% of these molecules are loaded into an optical dipole trap with peak number density n_{0}≈3×10^{10} cm^{-3} and temperature T≈40 μK. We observe two-body loss with rate coefficient β=2.7_{-0.8}^{+1.2}×10^{-10} cm^{3} s^{-1}. Achieving this density and temperature opens a path to evaporative cooling towards quantum degeneracy of laser-cooled molecules.
We present experiments with cold atoms in optical dipole potentials which are directed towards developing an integrated coherent atom optics with micro-optical systems. We describe an experiment on evaporative cooling in a far-detuned optical dipole trap for ⁸⁷Rb. The dipole trap is created by a solid state laser at a wavelength of 1030 nm. To achieve high initial phase space densities allowing for efficient evaporative cooling, we have optimised the loading process from a magneto-optical trap into the dipole trap. Starting with an initial phase space density of 2 × 10⁻⁴ the trap depth was ramped down and temperatures below 200 nK and phase space densities of about 0.2 could be reached. These investigations aim at the creation of an ’all-optical’ BEC based on a simple experimental scheme. As an example for an integrated atom optical system, we present the transport of atoms in a ring-shaped guiding structure, i.e. optical storage ring, for cold atoms which is produced by a micro-fabricated ring lens.
We present a detailed experimental study of the physics involved in transferring atoms from a magneto-optical trap (MOT) to an optical dipole trap. The loading is a dynamical process determined by a loading rate and a density dependent loss rate. The loading rate depends on cooling and the flux of atoms into the trapping volume, and the loss rate is due to excited state collisions induced by the MOT light fields. From this study we found ways to optimize the loading of the optical dipole trap. Key ingredients for maximum loading are found to be a reduction of the hyperfine repump intensity, increased detuning of the MOT light, and a displacement of the optical dipole trap center with respect to the MOT. A factor of 2 increase in the number of loaded atoms is demonstrated by using a hyperfine repump beam with a shadow in it. In this way we load $8\ifmmode\times\else\texttimes\fi{}{10}^{6}{}^{85}\mathrm{Rb}$ atoms into a 1 mK deep optical dipole trap with a waist of $58 \ensuremath{\mu}\mathrm{m},$ which is 40% of the atoms initially trapped in the MOT.
We demonstrate a novel dual color magneto—optical trap (MOT), which uses two sets of overlapping laser beams to cool and trap 87 Rb atoms. The volume of cold cloud in the dual color MOT is strongly dependent on the frequency difference of the laser beams and can be significantly larger than that in the normal MOT with single frequency MOT beams. Our experiment shows that the dual color MOT has the same loading rate as the normal MOT, but much longer loading time, leading to threefold increase in the number of trapped atoms. This indicates that the larger number is caused by reduced light induced loss. The dual color MOT is very useful in experiments where both high vacuum level and large atom number are required, such as single chamber quantum memory and Bose—Einstein condensation (BEC) experiments. Compared to the popular dark spontaneous-force optical trap (dark SPOT) technique, our approach is technically simpler and more suitable to low power laser systems.