The topic of physical layer authenticated encryption using high rate key generation through shared randomness is investigated in this work. First, a physical layer secret key generation scheme is discussed exploiting channel reciprocity in wireless systems. In order to address the susceptibility of this scheme to active attacks, a novel physical layer authentication encryption protocol is presented along with its extension to multi-node networks in the presence of active adversaries. Secondly, in order to increase the key generation rate, a multi-level quantization algorithm with public feedback is discussed. It is demonstrated that the proposed scheme is superior to direct information distillation approaches and can substantially increase the key generation rates even at low and medium SNRs.
The topic of physical layer authenticated encryption using high rate key generation through shared randomness is investigated in this work. First, a physical layer secret key generation scheme is discussed exploiting channel reciprocity in wireless systems. In order to address the susceptibility of this scheme to active attacks, a novel physical layer authentication encryption protocol is presented along with its extension to multi-node networks in the presence of active adversaries. Secondly, in order to increase the key generation rate, a multi-level quantization algorithm with public feedback is discussed. It is demonstrated that the proposed scheme is superior to direct information distillation approaches and can substantially increase the key generation rates even at low and medium SNRs.
The use of wireless networks for communication has grown significantly in recent times, and continues to develop further. The broadcast nature of wireless communications makes them susceptible to a wide variety of security attacks. Unlike traditional solutions, which usually handle security at the application layer, the primary concern of this dissertation is to analyse and develop solutions for secure communication using channel coding techniques at the physical-layer. \nThe topic of physical layer authenticated encryption using high rate key generation through shared randomness is investigated in this work. First, a physical layer secret key generation scheme is discussed exploiting channel reciprocity in wireless systems. In order to address the susceptibility of this family of schemes to active attacks, a novel physical layer authentication encryption protocol is presented along with its extension to multi-node networks in the presence of active adversaries. Unlike previous work in the area of generating secret keys through shared randomness, it is demonstrated that the proposed scheme is semantically secure with respect to chosen plaintext and chosen cipher text attacks. \nSecondly, in order to increase the rate in bits per seconds at which agreed cryptographic keys are been generated, a multi-level quantization algorithm with public feedback is discussed. It is demonstrated that the proposed scheme is superior to direct information distillation approaches and can substantially increase the key generation rates even at low and medium SNRs. Furthermore, the employment of this low-overhead feedback at the information distillation process can largely simplify the information reconciliation process. \nThe proposed secret key generation schemes are tested for randomness such as required for cryptographic keys. The validation test is perfomed with the aid of National Institute of Standards and Technology (NIST) statistical test suite. The P-values obtained in each of the test carried out indicates that the key sequence generated by our algorithm is random.
Abstract: Physical layer key generation, leveraging the reciprocity and randomness of wireless fading channels, has garnered significant research interest in recent years. While theoretical studies have demonstrated its potential to generate informationtheoretically secure keys, challenges remain in translating theory into practice. This paper provides an overview of the physical layer key generation process and discusses its practical challenges. Various passive and active attacks are analyzed and evaluated through numerical studies. A new key generation scheme using random probing signals and combining usergenerated randomness with channel randomness is introduced to counteract active attacks. Numerical results demonstrate that the proposed scheme achieves higher security strength than existing schemes using constant probing signals under active attacks. Secret-key generation relying on wireless channel reciprocity is an intriguing solution as it can be efficiently implemented at the physical layer of emerging wireless communication networks, while providing information-theoretic security guarantees. In this paper, we investigate and compare the secret-key capacity based on the sampling of the entire complex channel state information (CSI) or only its envelope, the received signal strength (RSS).
Physical layer encryption is a promising solution to provide transmission security for Internet-of-Things (IoT). To realize physical layer encryption, channel state information (CSI) as a random source to generate secret keys should be exploited. The reciprocity of wireless channel between legitimate communication nodes which is typically assumed for time division duplex (TDD) systems, is of critical importance to ensure the consistency in generated keys at two nodes. However, in practical TDD systems, due to the asynchronous measurement of CSI, the receiver noise and the the difference in hardware, etc., the reciprocity of channel measurements between legitimate parties is hard to be guaranteed, which makes physical layer key generation approach infeasible. To address this issue, we propose a wireless key generation scheme based on deep learning techniques. Firstly, a feature extraction network, which consists of two auto-encoders trained jointly, is developed to extract the common feature from the different yet correlated channel observations at two legitimate nodes, which will be used as the source to generate keys. Then a quantizer with an adaptive guard band width is devised to output a binary secret-key sequence from the feature vector. Numerical results show that the proposed scheme achieves remarkable improvement in terms of key disagreement rate (KDR) and key generation rate (KGR) compared existing counterparts in the literature.
Physical layer key generation that exploits reciprocity and randomness of wireless fading channels has attracted considerable research attention in recent years. Although theoretical study has shown its potential to generate information- theoretic secure keys, great challenges remain when transforming the theory into practice. This article provides an overview of the physical layer key generation process and discusses its practical challenges. Different passive and active attacks are analyzed and evaluated through numerical study. A new key generation scheme using random probing signals, and combining user generated randomness and channel randomness, is introduced as a countermeasure against active attacks. The numerical results show that the proposed scheme achieves higher security strength than existing schemes using constant probing signals under active attacks. Future research topics on physical layer key generation are discussed.
As an alternative and appealing approach to providing information security in wireless communication systems, secret key generation at physical layer has demonstrated its potential in terms of efficiency and reliability over traditional cryptographic methods. Without the necessity of a management centre for key distribution or reliance on computational complexity, physical layer key generation protocols enable two wireless entities to extract identical and dynamic keys from the randomness of the wireless channels associated with them.\nIn this thesis, the reliability of secret key generation at the physical layer is examined in practical wireless channels with imperfect channel state information (CSI). Theoretical analyses are provided to relate key match rate with channel's signal-to-noise ratio (SNR), degrees of channel reciprocity, and iterations of information reconciliation.\nIn order to increase key match rate of physical layer secret key generation, improved schemes in the steps of channel estimation and sample quantization are proposed respectively. In the channel estimation step, multiple observations of the wireless channels are integrated with a linear processor to provide a synthesized and more accurate estimation of the wireless channel. In the sample quantization step, a magnitude based quantization method with two thresholds is proposed to quantize partial samples, where specific quantization areas are selected to reduce cross-over errors. Significant improvements in key match rate are proven for both schemes in theoretical analysis and numerical simulations. Key match rate can even achieve 100% in both schemes with the assistance of information reconciliation process.\nIn the end, a practical application of physical layer secret key generation is presented, where dynamic keys extracted from the wireless channels are utilized for securing secret data transmission and providing efficient access control.
Physical layer security (PLS) can be adopted for efficient key sharing in secured wireless systems. The random nature of the wireless channel and channel reciprocity (CR) are the main pillars for realizing PLS techniques. However, for applications that involve air-to-air (A2A) transmission, such as unmanned aerial vehicle (UAV) applications, the channel does not generally have sufficient randomness to enable reliable key generation. Therefore, this work proposes a novel system design to mitigate the channel randomness constraint and enable high-rate secret key generation (SKG) process. The proposed system integrates physically unclonable functions (PUFs) and CR principle to securely exchange secret keys between two nodes. Moreover, an adaptive and controllable artificial fading (AF) level with interleaving is used to mitigate the impact of low randomness variations in the wireless channel. The proposed system can operate efficiently even when the channel is nearly flat or time invariant. Consequently, the time required for generating and sharing a key is significantly shorter than conventional techniques. We also propose a novel bit extraction scheme that reduces the number of overhead bits required to share the intermediate keys. The obtained Monte Carlo simulation results show that a key agreement can be reached at the first trial for moderate and high signal-to-noise ratios (SNRs), which is substantially faster than other PLS techniques. Moreover, the results show that inducing AF into static channels reduces the mismatch ratio between the generated secret sequences and degrades the eavesdropper’s capability to predict the secret keys.