We propose a novel soliton storage ring scheme using rational-harmonic phase modulation. Unlike conventional soliton storage buffers, which require the modulation frequency equal to the stored data rate, in this scheme, we set the modulation signal repetition rate, and the modulation pulse width equal to the stored data period.
We propose what is to our knowledge a novel storage ring that uses rational-harmonic phase modulation whereby the width of the modulation pulse is approximately equal to the data period and the ratio of the modulation frequency to the ring fundamental frequency is a noninteger. The stored data rate is then the lowest multiple of the modulation frequency and the fundamental frequency of the ring. Numerical simulation shows that the data rate of greater than the 40th harmonic of the modulation frequency can be stored stably in the ring, which means that ultrahigh-speed data pulses can be stored stably in the ring with a much lower modulation frequency.
We demonstrate the operation of an all-optical buffer based on temporal cavity solitons stored in a nonlinear passive fiber ring resonator. Unwanted acoustic interactions between neighboring solitons are suppressed by modulating the phase of the external laser driving the cavity. A new locking scheme is presented that allows the buffer to operate with an arbitrarily large number of cavity solitons in the loop. Experimentally, we are able to demonstrate the storage of 4536 bits of data, written all optically into the fiber ring at 10 Gb/s for 1 min.
The requirements for higher data rates in optical communication systems lead to the use of more efficient modulation formats. In the networks the all optical synchronization and storage of these signals is still a major challenge in order to enable higher transmittable data rates and reduce the energy consumption. In this contribution we show for the first time, to the best of our knowledge, the tunable storage of phase modulated optical data packets with up to 60 pulse widths. This opens the way to the optical storage of data packets modulated with highly efficient modulation formats.
Optical buffers are devices which can store optical signals for a period of time and could be valuable tools for applications such as optical storage, optical packet switching and all-optical signal processing providing the storage functionality in the optical domain, thus avoiding unwanted opto-electronic and eletro-optical conversions. During the last twenty years, there have been proposed many approaches for the implementation of optical buffers. The most straightforward scheme is the use of a fiber spool playing the role of a long-time optical delay line which requires either direct or indirect amplitude modulation to maintain the bit timing [1]. Other interesting techniques referring to optical buffering are slow-light [2], temporal solitons in optical cavities [3], excitability properties of optical devices [4] and photonic crystal nanocavities [5].
We propose a novel approach to time-domain storage of serial optical data. In this approach, two identical impulse-equivalent sequences are used as write and read pulses to store and later retrieve optical information. These pulse sequences are both amplitude and phase modulated in such a way that their autocorrelations resemble, as closely as theoretically possible, the autocorrelation of a single large brief pulse to ensure faithful data retrieval. Such impulse-equivalent sequences are known to exist for all lengths, permitting the storage of large-bandwidth data. The advantages of this approach include modest laser power requirement, high signal fidelity, and encrypted recording.
We propose a novel approach to time-domain storage of serial optical data. In this approach, two identical impulse- equivalent sequences are used as write and read pulses to store and later retrieve optical information. These pulse sequences are both amplitude- and phase-modulated in such a way that their autocorrelations resemble, as closely as theoretically possible, the autocorrelation of a single large brief pulse to ensure faithful data retrieval. Such impulse-equivalent sequences are known to exist for all lengths, permitting the storage of large bandwidth data. In a proof-of-concept experiment, we have successfully stored a 42-microsecond long stream containing 420 bits of data in a 40-MHz spectral channel in a Eu3+:Y2SiO5 crystal. The stored data was repeatedly recalled for up to eight times with high signal fidelity, showing no measurable sidelobe-induced noise.