Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE Transactions on Applied Superconductivity

Large steps in long Josephson junctions

L. Baselgia Stahel, O. G. Symko, D.J. Zheng

Published Mar 1, 1993• 0 citations
Publisher

Abstract

Large constant voltage-current steps were observed in the I-V characteristics of long NbN-MgO-NbN Josephson junctions in the presence of external magnetic fields of a few Gauss. The steps are separated by a voltage corresponding roughly to three to five times the voltage spacing expected between adjacent Fiske steps. Models addressing the origin of such steps are presented. Simultaneous nucleation of fluxons at several sites along the junction with thin electrodes, favored by the large London penetration depth of NbN, would introduce a large amount of magnetic flux into the junction at once, leading to large steps. A model which involves pinning of fluxons in the junction is given. Due to the granularity of NbN and its very small coherence length, there will be pinning sites in the junction preventing single fluxons from moving at low bias currents. At particular junction parameter values the steps become very regular and sharp. The sharp steps can be used as a voltage standard without external RF bias or as a high-power oscillator when the device is suitably biased.>

DOI
10.1109/77.233534

Related papers

Coherent emission from the stack of Josephson junctions with the non-uniform inductive interaction

O. M. Grib, O. L. Samsonik, Р. В. Сухов

During last decade, considerable efforts were made to achieve coherent emission from stacks of many Josephson junctions. It is known that strong emission from a junction in the presence of external magnetic field appears at the so-called Fiske steps in the IV-characteristic at voltages which correspond to frequencies of geometrical resonances. However, it is possible to obtain resonant steps in long junctions without external magnetic field. The periodical movement of fluxons is excited due to some disorder in the distribution of critical currents along junctions. The so-called zero-field steps are formed in the IV-curve due to the interaction of fluxons with oscillations of voltage at Josephson frequencies. We investigated numerically IV-characteristics and the dependence of the average square of ac voltage at the end of the stack of two long Josephson junctions on the average voltage. Junctions interacted inductively with each other. We introduced not only the Gaussian distribution of critical currents along junctions but also the Gaussian distribution of coefficients of the interaction between junctions (mutual inductances). Zero-field steps in the IV-characteristic were found at voltages which corresponded to frequencies of in-phase collective modes in the stack as well as to frequencies of uncoupled junctions. Zero-field steps appeared in the hysteretic region of the IV-curve. There appeared also jumps of voltage from the resistive branch to the zero-field step. We showed that there existed distributions of mutual inductances along junctions which provided jumps to voltages at which the average square of ac voltage at the end of the stack (which is proportional to power of emission) was larger than that for the stack with the uniform distribution of mutual inductances.

The Journal of V N Karazin Kharkiv National University Series Physics•Jan 1, 2019•0 citations

Josephson Junctions as Narrow-Linewidth Tunable Microwave Oscillators

O. A. Levring, Matteo Cirillo, Bjørn Dueholm +6 more

Extensive measurements of radiation emitted from long Josephson junctions d.c.-current biased on zero-field and Fiske-steps are reported. The measurements were made in the band 8-10 GHz on long Nb-Nb oxide-Pb overlap tunnel junctions with the lengths 0.5 mm and 1.0 mm having fundamental frequencies of 10 GHz and 5 GHz, respectively. Depending on the fundamental frequency of the junction 1st or 2nd harmonic detection was employed. In the fundamental scheme the frequency f n vs. the d.c.-voltage V n along the steps follows a modified Josephson voltage/frequency relation f n / V n = 2 e/nh , where n is the step-number n = 1, 2, 3,... for Fiske-steps and n = 2, 4, 6,... for zero-field steps. On a given step the frequency could be tuned (200-500 MHz) by varying the bias point. The linewidth was measured to be less than 5 kHz. All the observed phenomena are consistent with a novel unified dynamic bunched fluxon model applicable to both zero-field and Fiske-steps and are in good agreement with recent numerical solutions of the perturbed sine-Gordon equation with proper boundary conditions. Taking advantage of operation on higher order steps and strong harmonic generation the present upper frequency limit for the Josephson fluxon oscillator is above 200 GHz. The maximum power observed so far is only 5 pW, but the estimated available power is of the order 1 μW, which is quite sufficient to pump other Josephson devices.

Physica Scripta•Jun 1, 1982•5 citations

Millimeter wave generation by fluxon oscillations in a Josephson junction

Matteo Cirillo, I. Modena, P. Carelli +1 more

A small-area Josephson tunnel junction is pumped by the radiation emitted by a long Josephson junction dc biased on a zero-field singularity. Josephson constant voltage steps are observed in the current-voltage characteristic of the small junction at voltages of ±150 μV corresponding to the fundamental frequency of emission of the oscillator. The radiation also gives rise to quasiparticle steps around the gap-sum voltage of the small junction. From the measured current amplitude of the steps we estimate that the maximum power coupled to the small junction is about 90 nW.

Journal of Applied Physics•Mar 15, 1989•15 citations

Dynamics and Applications of Long Josephson Junctions

Yongming Zhang

The first object of this work is to theoretically study the effects of tunnel junction parameters on flux-flow Josephson oscillators (FFOs) by numerical simulation and to experimentally study the rf properties of FFOs by integrating them together with an SIS (superconductor-insulator-superconductor) mixer/detector on a chip. By using a CAD modeled integrated sub-mm wave receiver, the composite linewidth of two FFOs was measured to be less than 2.1 MHz in the band 280-330 GHz. The receiver consists of two identical FFOs and an SIS mixer. The linewidth was determined by mixing the two signals in the SIS mixer and analyzing the intermediate frequency. The output power coupled to a 10 .OMEGA. microstripline was about 0.5 µW, and could be adjusted by changing the current bias of the oscillator. The FFOs are connected to the SIS mixer via interdigital capacitors. The FFOs and the SIS element are made of Nb/NbOx/PbBi junctions by the "reactive ion beam oxidation" technique with the critical current density jc controlled by the oxidation time. Lift-off stencils for defining the junction sizes and the top-electrodes were made by using electron-beam writing on PMMA/Copolymer double layer resist. The jc of a long Josephson junction (LJJ) determines the fluxon motion. For LJJs which had jc > 1 kA/cm2, velocity-matching (VM, where the phase velocity of propagating fluxons equals that of the electromagnetic wave in the LJJ) steps could be tuned linearly from about 0.2 to 1.4 mV by an applied magnetic field. Coupled radiation at around 100 GHz (about 3 nW), 261 GHz (4.6 nW), and 330 GHz (0.43 µW), from flux-flow oscillations, was observed. From the step's steepness, the junction quality factor QJ is determined. QJ is between 4 to 7 in the voltage range of 0.4 to 1 mV. Coupled radiation (> 3 nW) at around 100 GHz corresponding to resonant soliton oscillation in low jc samples (250 to 1000 A/cm2) was detected. Simulations show that, for a uniform bias feed, the height of the VM step .gammam increases almost linearly with the external magnetic field .beta.e and the quasiparticle loss .alpha., but is less dependent on the surface loss .beta.. An approximate expression .gammam = a + .alpha(1+b).beta.e agrees with simulations. The maximum ac output voltage decreases with increasing dampings .alpha. and .beta.. It is important to include the .beta.-term in the mathematical model. The second part of this work is devoted to rf properties of long YBa2Cu3O7-.delta. (YBCO) grain boundary junctions made on 0- 32 °. [001]-tilt YSZ bicrystals. Josephson flux-flow resonances and Fiske resonances were observed. The first resonances could be tuned from about 0.5 to 2.0 mV in a 30 µm long junction at 16 K, and we determined the ratio between barrier thickness and relative dielectric constant td/.epsilon.r=2.9 Å and the loss .alpha.= 1.3 at 16 K. Simulations support the experimental observation that Josephson vortices can propagate unidirectionally in an overdamped, homogeneous junction up to .alpha.Ã? 2. From the Fiske resonances at 256-638 GHz, their Q-values, and the Steward-McCumber parameter, we find td/.epsilon.r=4 Å, the London penetration depth .gamma.L=145±5 nm and the surface resistance RS ~20 m.OMEGA. at 280 GHz. We conclude that the boundary is dielectric and the YBCO grains are well superconducting within 5-20 nm from the boundary. The dielectric between the grains could be part of a tunnel barrier and/or a matrix for filamentary conduction. Josephson flux-flow transitors based on long bicrystal junctions were made with an Au loop used as the control line. The line modulated the critical current Ic. Current gain larger than unity was obtained below 70 K. The gain increased with the junction length and varied roughly like the square root Ic when adjusting the temperature. A transresistance larger than 5 .OMEGA. was obtained at 15 K. Better performance is expected from junctions with high current densities.

•Jan 1, 1993•7 citations

Radio-frequency properties of stacked long Josephson junctions with nonuniform bias current distribution

Giovanni Filatrella, N. F. Pedersen

We have numerically investigated the behavior of stacks of long Josephson junctions considering a nonuniform bias profile. In the presence of a microwave field the nonuniform bias, which favors the formation of fluxons, can give rise to a change of the sequence of radio-frequency induced steps. The amplitude of the steps is enhanced when the external frequency matches the fluxon shuttling regime.

Journal of Applied Physics•May 1, 1999•1 citation

Large RF-controlled voltage steps in DC SQUIDs applicable to voltage standards and sources

G.S. Lee, H.L. Ho, Rich Ruby +1 more

The current height of RF-induced voltage steps in nonhysteretic single Josephson junctions is usually a small fraction of the critical current. It is demonstrated that when a resistively shunted DC superconducting quantum interference device (SQUID) is subjected to an RF magnetic flux, a voltage step with a large current height is obtained. In contrast to weak selection rules for single Josephson junctions, strong selection of the step harmonic number occurs in a shunted DC SQUID for appropriate choice of RF amplitude and DC flux offset, with odd harmonic numbers selected by half-integer flux quantum offsets and even harmonic numbers by integer flux quantum offsets. This pronounced effect has immediate implications for voltage standards and fast, high-precision digital-to-analog converters.>

IEEE Transactions on Applied Superconductivity•Mar 1, 1993•16 citations
Large constant voltage-current steps were observed in the I-V characteristics of long NbN-MgO-NbN Josephson junctions in the presence of external magnetic fields of a few Gauss. The steps are separated by a voltage corresponding roughly to three to five times the voltage spacing expected between adjacent Fiske steps. Models addressing the origin of such steps are presented. Simultaneous nucleation of fluxons at several sites along the junction with thin electrodes, favored by the large London penetration depth of NbN, would introduce a large amount of magnetic flux into the junction at once, leading to large steps. A model which involves pinning of fluxons in the junction is given. Due to the granularity of NbN and its very small coherence length, there will be pinning sites in the junction preventing single fluxons from moving at low bias currents. At particular junction parameter values the steps become very regular and sharp. The sharp steps can be used as a voltage standard without external RF bias or as a high-power oscillator when the device is suitably biased.>
During last decade, considerable efforts were made to achieve coherent emission from stacks of many Josephson junctions. It is known that strong emission from a junction in the presence of external magnetic field appears at the so-called Fiske steps in the IV-characteristic at voltages which correspond to frequencies of geometrical resonances. However, it is possible to obtain resonant steps in long junctions without external magnetic field. The periodical movement of fluxons is excited due to some disorder in the distribution of critical currents along junctions. The so-called zero-field steps are formed in the IV-curve due to the interaction of fluxons with oscillations of voltage at Josephson frequencies. We investigated numerically IV-characteristics and the dependence of the average square of ac voltage at the end of the stack of two long Josephson junctions on the average voltage. Junctions interacted inductively with each other. We introduced not only the Gaussian distribution of critical currents along junctions but also the Gaussian distribution of coefficients of the interaction between junctions (mutual inductances). Zero-field steps in the IV-characteristic were found at voltages which corresponded to frequencies of in-phase collective modes in the stack as well as to frequencies of uncoupled junctions. Zero-field steps appeared in the hysteretic region of the IV-curve. There appeared also jumps of voltage from the resistive branch to the zero-field step. We showed that there existed distributions of mutual inductances along junctions which provided jumps to voltages at which the average square of ac voltage at the end of the stack (which is proportional to power of emission) was larger than that for the stack with the uniform distribution of mutual inductances.
Extensive measurements of radiation emitted from long Josephson junctions d.c.-current biased on zero-field and Fiske-steps are reported. The measurements were made in the band 8-10 GHz on long Nb-Nb oxide-Pb overlap tunnel junctions with the lengths 0.5 mm and 1.0 mm having fundamental frequencies of 10 GHz and 5 GHz, respectively. Depending on the fundamental frequency of the junction 1st or 2nd harmonic detection was employed. In the fundamental scheme the frequency f n vs. the d.c.-voltage V n along the steps follows a modified Josephson voltage/frequency relation f n / V n = 2 e/nh , where n is the step-number n = 1, 2, 3,... for Fiske-steps and n = 2, 4, 6,... for zero-field steps. On a given step the frequency could be tuned (200-500 MHz) by varying the bias point. The linewidth was measured to be less than 5 kHz. All the observed phenomena are consistent with a novel unified dynamic bunched fluxon model applicable to both zero-field and Fiske-steps and are in good agreement with recent numerical solutions of the perturbed sine-Gordon equation with proper boundary conditions. Taking advantage of operation on higher order steps and strong harmonic generation the present upper frequency limit for the Josephson fluxon oscillator is above 200 GHz. The maximum power observed so far is only 5 pW, but the estimated available power is of the order 1 μW, which is quite sufficient to pump other Josephson devices.
A small-area Josephson tunnel junction is pumped by the radiation emitted by a long Josephson junction dc biased on a zero-field singularity. Josephson constant voltage steps are observed in the current-voltage characteristic of the small junction at voltages of ±150 μV corresponding to the fundamental frequency of emission of the oscillator. The radiation also gives rise to quasiparticle steps around the gap-sum voltage of the small junction. From the measured current amplitude of the steps we estimate that the maximum power coupled to the small junction is about 90 nW.
The first object of this work is to theoretically study the effects of tunnel junction parameters on flux-flow Josephson oscillators (FFOs) by numerical simulation and to experimentally study the rf properties of FFOs by integrating them together with an SIS (superconductor-insulator-superconductor) mixer/detector on a chip. By using a CAD modeled integrated sub-mm wave receiver, the composite linewidth of two FFOs was measured to be less than 2.1 MHz in the band 280-330 GHz. The receiver consists of two identical FFOs and an SIS mixer. The linewidth was determined by mixing the two signals in the SIS mixer and analyzing the intermediate frequency. The output power coupled to a 10 .OMEGA. microstripline was about 0.5 µW, and could be adjusted by changing the current bias of the oscillator. The FFOs are connected to the SIS mixer via interdigital capacitors. The FFOs and the SIS element are made of Nb/NbOx/PbBi junctions by the "reactive ion beam oxidation" technique with the critical current density jc controlled by the oxidation time. Lift-off stencils for defining the junction sizes and the top-electrodes were made by using electron-beam writing on PMMA/Copolymer double layer resist. The jc of a long Josephson junction (LJJ) determines the fluxon motion. For LJJs which had jc > 1 kA/cm2, velocity-matching (VM, where the phase velocity of propagating fluxons equals that of the electromagnetic wave in the LJJ) steps could be tuned linearly from about 0.2 to 1.4 mV by an applied magnetic field. Coupled radiation at around 100 GHz (about 3 nW), 261 GHz (4.6 nW), and 330 GHz (0.43 µW), from flux-flow oscillations, was observed. From the step's steepness, the junction quality factor QJ is determined. QJ is between 4 to 7 in the voltage range of 0.4 to 1 mV. Coupled radiation (> 3 nW) at around 100 GHz corresponding to resonant soliton oscillation in low jc samples (250 to 1000 A/cm2) was detected. Simulations show that, for a uniform bias feed, the height of the VM step .gammam increases almost linearly with the external magnetic field .beta.e and the quasiparticle loss .alpha., but is less dependent on the surface loss .beta.. An approximate expression .gammam = a + .alpha(1+b).beta.e agrees with simulations. The maximum ac output voltage decreases with increasing dampings .alpha. and .beta.. It is important to include the .beta.-term in the mathematical model. The second part of this work is devoted to rf properties of long YBa2Cu3O7-.delta. (YBCO) grain boundary junctions made on 0- 32 °. [001]-tilt YSZ bicrystals. Josephson flux-flow resonances and Fiske resonances were observed. The first resonances could be tuned from about 0.5 to 2.0 mV in a 30 µm long junction at 16 K, and we determined the ratio between barrier thickness and relative dielectric constant td/.epsilon.r=2.9 Å and the loss .alpha.= 1.3 at 16 K. Simulations support the experimental observation that Josephson vortices can propagate unidirectionally in an overdamped, homogeneous junction up to .alpha.Ã? 2. From the Fiske resonances at 256-638 GHz, their Q-values, and the Steward-McCumber parameter, we find td/.epsilon.r=4 Å, the London penetration depth .gamma.L=145±5 nm and the surface resistance RS ~20 m.OMEGA. at 280 GHz. We conclude that the boundary is dielectric and the YBCO grains are well superconducting within 5-20 nm from the boundary. The dielectric between the grains could be part of a tunnel barrier and/or a matrix for filamentary conduction. Josephson flux-flow transitors based on long bicrystal junctions were made with an Au loop used as the control line. The line modulated the critical current Ic. Current gain larger than unity was obtained below 70 K. The gain increased with the junction length and varied roughly like the square root Ic when adjusting the temperature. A transresistance larger than 5 .OMEGA. was obtained at 15 K. Better performance is expected from junctions with high current densities.
The current height of RF-induced voltage steps in nonhysteretic single Josephson junctions is usually a small fraction of the critical current. It is demonstrated that when a resistively shunted DC superconducting quantum interference device (SQUID) is subjected to an RF magnetic flux, a voltage step with a large current height is obtained. In contrast to weak selection rules for single Josephson junctions, strong selection of the step harmonic number occurs in a shunted DC SQUID for appropriate choice of RF amplitude and DC flux offset, with odd harmonic numbers selected by half-integer flux quantum offsets and even harmonic numbers by integer flux quantum offsets. This pronounced effect has immediate implications for voltage standards and fast, high-precision digital-to-analog converters.>