European Conference on Optical Communication

Pulse broadening of zero-gain Brillouin slow light in an optical fiber

Guanshi Qin, Takenobu Suzuki, Yasutake Ohishi

Published Jan 1, 2008• 0 citations

Abstract

We investigate pulse-broadening effects of zero-gain Brillouin slow-light (ZGBSL) in an optical fiber. The results show that the stored-capacity of ZGBSL is less than that of SBS amplifier-based slow-light system.

DOI: 10.1109/ecoc.2008.4729425

Related papers

Broadening-free stimulated Brillouin scattering-based slow and fast light in optical fibers

Thomas Schneider, Andrzej Wiatrek

The manipulation of the group velocity of optical signals (slow and fast light) has many possible applications in telecommunications, sensing, nonlinear optics, and so on. The exploitation of the effect of stimulated Brillouin scattering (SBS) is of special interest for the alteration of the group velocity in optical fibers, since it just requires standard telecom equipment and low-to-moderate optical power. However, each delay in one single, low-gain SBS-based slow-light system is accompanied by a pulse broadening. This is a result of the inherent Kramers–Kronig relations among the gain, the phase change, and the accompanied group velocity. For an ideal flat gain, the phase change is nonideal, and for an ideal phase change the gain curve leads to a broadening. Furthermore, if the gain bandwidth is adapted to the signal by broadening, the delay will be reduced. Thus the signal broadening can be reduced by several methods for one single low-gain slow-light system, but it cannot be zero. Here, we will show how a zero-broadening SBS-based slow light can be achieved with several methods. The basic idea is a reshaping of the original pulse in a second stage by saturation of the SBS system, or by the superposition of two gains. As will be shown, all of these systems show an almost ideal overall gain and phase function over the bandwidth of the pulses. Thus, SBS-based slow light with a delay bandwidth product of 1 bit and zero distortion is possible.

Optical EngineeringAug 25, 20140 citations

Broadening-free SBS-based slow and fast light in optical fibers

Thomas Schneider, Andrzej Wiatrek

To change the group velocity of optical signals has a lot of possible applications in telecommunications, sensing, nonlinear optics and so on. Especially the exploitation of the effect of stimulated Brillouin scattering (SBS) in optical fibers is of special interest since it just requires standard telecom equipment and low to moderate optical power. However, each delay in one single, low-gain SBS based slow-light system is accompanied by pulse broadening. This is a result of the inherent Kramers-Kronig relations between the gain, the phase-change and the accompanied group velocity. For an ideal flat gain the phase-change is non-ideal, and for an ideal phase-change the gain curve leads to a broadening. Furthermore, if the gain bandwidth is broadened in order to adapt it to the signal, the delay will be reduced. Thus, for one single low-gain slow-light system the broadening can be reduced by several methods but it cannot be zero. Here we will show how a zero-broadening SBS based slow-light system can be achieved by two different methods. The basic idea is a reshaping of the original pulse by an adapted gain in a second stage. This adaptation is achieved by the superposition of two Gaussian gain profiles or by a single saturated gain. As will be shown, these systems show an almost ideal over-all gain and phase function over the bandwidth of the pulses. Thus, SBS based slow-light with a delaybandwidth product of more than 1 bit and zero distortion is possible.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIEFeb 21, 20140 citations

Comparative investigation of zero-broadening methods in Brillouin based slow-light systems

Andrzej Wiatrek, Ronny Henker, Stefan Preußler +1 more

The manipulation of the velocity of optical pulses in fibers by so-called slow-light systems seems to be very promising for future all-optical networks, but actual approaches suffer from an inevitable pulse broadening due to the delay process. In this article two different methods for the achievement of zero-broadening in Brillouin based slow-light systems are compared in theory and experiment. While one system works in the saturated regime of a Brillouin amplifier the other works in its linear regime. Both approaches fully avoid the system inherent broadening of conventional slow-light delays and can therefore extend such systems to increase their efficiency significantly. (6 pages)

Irish Signals and Systems ConferenceJan 1, 20092 citations

Zero-broadening SBS slow light propagation in an optical fiber using two broadband pump beams

Shihe Wang, Liyong Ren, Yu Liu +1 more

A new method of tailoring stimulated Brillouin scattering (SBS) gain spectrum for slow light propagation is proposed by use of two Gaussian-shaped broadband pump beams with different powers and spectral widths. The central frequency interval between the two pump beams are carefully set to be two inherent Brillouin frequency shift, ensuring that the gain spectrum of one pump has the same central frequency with the loss spectrum of the other one. Different gain profiles are obtained and analyzed. Among them a special gain profile is found that ensures a zero-broadening of the signal pulse independent of the Brillouin gain. This is owing to the compensation between the positive gain-dependent broadening and the negative GVD (group velocity dispersion) dependent broadening. The relationship of two pump beams is also found for constructing such a gain profile. It provides us a new idea of managing the broadening of SBS-based slow pulse by artificially constructing and optimizing the profile of gain spectrum.

Optics ExpressMay 20, 200841 citations

Broadband SBS Slow Light in an Optical Fiber

Zhaoming Zhu, Andrew M. C. Dawes, Daniel J. Gauthier +2 more

In this paper, we investigate slow light via stimulated Brillouin scattering (SBS) in a room temperature optical fiber that is pumped by a spectrally broadened laser. Broadening the spectrum of the pump field increases the linewidth Deltaomegapof the Stokes amplifying resonance, thereby increasing the slow-light bandwidth. One physical bandwidth limitation occurs when the linewidth becomes several times larger than the Brillouin frequency shift OmegaBso that the anti-Stokes absorbing resonance substantially cancels out the Stokes amplifying resonance and, hence, the slow-light effect. We find that partial overlap of the Stokes and anti-Stokes resonances can actually lead to an enhancement of the slow-light delay-bandwidth product when Deltaomegapsime1.3OmegaB. Using this general approach, we increase the Brillouin slow-light bandwidth to over 12 GHz from its nominal linewidth of ~30 MHz obtained for monochromatic pumping. We controllably delay 75-ps-long pulses by up to 47 ps and study the data-pattern dependence of the broadband SBS slow-light system

Journal of Lightwave TechnologyJan 1, 2007200 citations

Optimizing Broadband SBS Slow Light in an Optical Fiber

Daniel J. Gauthier, Zhaoming Zhu, Andrew M. C. Dawes +2 more

We describe how to optimize slow-light via stimulated Brillouin scattering in a room temperature optical fiber that is pumped with a spectrally broadened laser. Our recent experimental results on broadband SBS slow-light will be discussed.

Frontiers in OpticsJan 1, 20061 citation