Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

New Journal of Physics

Joint quantum state tomography of an entangled qubit–resonator hybrid

Xiayu Linpeng, Hanyu Zhang, Kai Xu, Changyou Li, Youpeng Zhong, Z L Wang, H. Wang, Qiwei Xie

Published Dec 20, 2013• 12 citations
Publisher

Abstract

The integration of superconducting qubits and resonators in one circuit offers a promising solution for quantum information processing (QIP), which also realizes the on-chip analogue of cavity quantum electrodynamics (QED), known as circuit QED. In most prototype circuit designs, qubits are active processing elements and resonators are peripherals. As resonators typically have better coherence performance and more accessible energy levels, it is proposed that the entangled qubit–resonator hybrid can be used as a processing element. To achieve such a goal, an accurate measurement of the hybrid is first necessary. Here we demonstrate a joint quantum state tomography (QST) technique to fully characterize an entangled qubit–resonator hybrid. We benchmarked our QST technique by generating and accurately characterizing multiple states, e.g. | gN 〉 + | e ( N − 1)〉 where (| g 〉 and | e 〉) are the ground and excited states of the qubit and (|0〉,...,| N 〉) are Fock states of the resonator. We further provided a numerical method to improve the QST efficiency and measured the decoherence dynamics of the bipartite hybrid, witnessing dissipation coming from both the qubit and the N -photon Fock state. As such, the joint QST presents an important step toward actively using the qubit–resonator element for QIP in hybrid quantum devices and for studying circuit QED.

DOI
10.1088/1367-2630/15/12/125027

Related papers

Preparation of hybrid W entangled states between superconducting qubits and microwave resonators in circuit QED

Jia-Heng Ni, Dong-Xuan Zhang, Wang-Chu Lv +4 more

Hybrid W entangled states are essential in quantum information processing, quantum communication, and quantum technology. In this Letter, we propose a simple method to prepare hybrid W entangled states between n superconducting (SC) qubits and n microwave resonators (MRs) in circuit QED. Only two basic operations are needed for the preparation of hybrid W states. The operational time decreases as the number of qubits increases. Since no ancillary cavity is required, the hardware resources for the state preparation are minimized. Because the state preparation does not involve any measurements, the hybrid W entangled states are generated in a deterministic way. Moreover, during the entire preparation, the high-energy levels of the SC qutrits remain unexcited, which greatly reduces decoherence of the SC qutrits. As an example, our numerical simulation demonstrates that high-fidelity preparation of the hybrid W entangled state of three SC qubits and three MRs is feasible within the current circuit QED technique. This method is universal and can be applied to generate hybrid W states of n matter qubits (e.g., atomic qubits, NV center qubits, quantum dot qubits, and magnon qubits) and n photonic qubits in various physical systems.

Applied Physics Letters•Oct 21, 2024•2 citations

Quantum information processing and measurement in circuit quantum electrodynamics

Ferdinand Helmer

In this thesis, experimentally relevant aspects and open questions of quantum information processing and measurement in circuit quantum electrodynamics have been investigated theoretically. Circuit quantum electrodynamics is a relatively young field combining superconducting transmission line resonators on-chip with superconducting quantum bits which serve as artificial atoms. Remarkable experiments have underlined the prospects of circuit QED as a possible architecture for quantum information processing as well as a framework within which quantum optics experiments can be performed. In contrast to their optical counterparts, these experiments reach the ultra-strong coupling limit and allow e.g. the generation of Fock states, the study of decoherence and the observation of quantum jumps. We present the physics of superconducting circuits based on the Josephson junction as a non-linear circuit element. We discuss the various types of quantum bits (qubits) before turning to an introduction on cavity QED and conclude the introduction with a brief presentation of the most relevant experiments and a short introduction to the principles and prospects of quantum information processing. Building on the pioneering theoretical and experimental work in which up to three qubits have been integrated on a chip and successfully coupled via a cavity mode, we propose a scheme to overcome the natural limits concerning scalability in these systems. Usually, scalability is severely limited by the resonance width of the qubit transitions and the attainable frequency range for both qubit transition and cavity resonance frequencies. This limits the present setups to at most ten qubits. As a possible solution, we propose and investigate a cross-bar grid layout of cavities with qubits at the intersections. It turns out that this setup, allowing for up to about 1000 qubits, offers significant advantages over e.g. nearest-neighbor coupling schemes. In addition, it can serve as a building block for a truly scalable scheme for fault-tolerant quantum information processing with superconducting circuits by combining 7x7 arrays in a staircase manner. Furthermore, we discuss and simulate different possibilities to improve upon the suggested scheme by e.g. using resonant gates and optimal control theory. Another focus of the present thesis is measurement physics. In order to investigate e.g. the possibilities of using a circuit QED system to dispersively detect single microwave photons or to generate multi-qubit entangled states, we introduce in a pedagogical manner the basics of stochastic master equations which generate quantum trajectories before turning to concrete applications. Quantum trajectories have proven to be a state-of-the-art tool to analyze measurement situations in a very realistic manner by giving access to both the measurement record as well as the internal quantum dynamics conditioned on this record. Using the method of quantum trajectories as generated by stochastic master equations, we discuss a scheme to efficiently generate multi-qubit entangled states in a very flexible way. The method is based on a collective, dispersive qubit readout. By this measurement, a suitable product state of N qubits can be reliably converted into e.g. an N-qubit Greenberger-Horne-Zeilinger or W state. We propose and discuss the scheme and investigate the effects of decoherence and parameter spread as they would be encountered in experiment. Last but not least, we propose and fully analyze a scheme to dispersively detect single itinerant microwave photons. While experiments to generate single microwave photons have already been successfully performed, their single-shot quantum non-demolition detection has not been possible so far. The scheme presented in this thesis closes this gap in the circuit QED toolbox and reaches detection efficiencies of 30% only limited by fundamental quantum mechanics in this case the Quantum Zeno effect. This detection scheme could be used in quantum communication or quantum cryptography applications.

•Jan 1, 2009•0 citations

Quantum Information Processing with Superconducting Qubits and Cavities

Andreas J. Wallraff, David Schuster, Alexandre Blais +10 more

In this paper, the coherent interaction of individual microwave photons with superconducting qubits is presented both for quantum information processing and for novel quantum optics experiments in the circuit quantum electrodynamics (QED) architecture. In the resonant regime we observe the vacuum Rabi mode splitting. In the non-resonant regime we use the dispersive coupling between the qubit and the cavity field to perform high visibility quantum non-demolition (QND) measurements of the qubit state. In the strong dispersive limit we also perform measurements of the cavity state from which the photon number statistics of the field can be extracted. Generally, the circuit QED architecture is attractive for quantum information processing and as an interface in hybrid quantum systems.

Conference on Lasers and Electro-Optics Europe & European Quantum Electronics Conference (CLEO/Europe-EQEC)•Jun 1, 2007•2 citations

Efficient preparation of high-dimensional hybrid entangled states in circuit quantum electrodynamics

Wang-Chu Lv, Wentao Zhao, Yu Wang +6 more

High-dimensional quantum systems, known as qudits with dimension $d>2$, possess the capability to encode and process more information than traditional two-dimensional qubits. Entangled states serve as crucial resources for both quantum computation and quantum communication. On the basis of circuit quantum electrodynamics (QED) systems, we introduce an efficient scheme to deterministically generate high-dimensional multipartite entangled states of hybrid qutrits ($d=3$). Assuming a simple initial state has already been prepared with the use of local operations, our method requires only a single step to produce hybrid Greenberger-Horne-Zeilinger (GHZ) entangled states among circuit QED systems consisting of superconducting qutrits and a superconducting cavity. Remarkably, the number of steps and the operational time remain constant as the number of qutrits increases, highlighting the efficiency and scalability of our approach. Using numerical simulations for a three-dimensional hybrid GHZ state of seven qutrits, we demonstrate the feasibility of our scheme and study the effects of various parameters on the fidelity. The importance of this research is in directing the experimental creation of multipartite, high-dimensional, and hybrid GHZ states, which can then be used to enhance quantum communication protocols and computational processes.

Physical Review Applied•May 14, 2025•5 citations

Deterministic preparation of hybrid GHZ entangled states with a superconducting qubit and multiple photonic qubits

Liang Bin, Lei Chen, Zheqi Yang +6 more

Hybrid entangled states are essential quantum resources not only for hybrid quantum communication but also for creating robust hybrid quantum networks and processors.By considering a circuit-cavity quantum electrodynamics (QED) system composed of a superconducting (SC) qutrit (a three-level quantum system) and n microwave cavities, we here present a method to prepare hybrid Greenberger-Horne-Zeilinger (GHZ) entangled states of n+1 qubits.The use of a single SC qutrit as the coupler leads to a significant saving in circuit hardware resources.The GHZ state preparation is deterministic without measurement.The operation time for the GHZ state preparation is independent of the number of qubits.Decoherence from the highest energy level of the SC qutrit is suppressed because this level remains unoccupied during the GHZ state preparation.Our numerical simulations demonstrate that the high-fidelity generation of hybrid GHZ states of an SC qubit and three photonic qubits is achievable within current circuit-QED technology.The proposed scheme possesses universality and is suitable for preparing hybrid GHZ states of a matter qubit (e.g., atomic qubit, trapped ion, quantum dot, magnon, NV center, and SC qubit with various types) and multiple photonic qubits across a wide range of physical systems.

Chinese Optics Letters•Jan 1, 2025•1 citation

Entanglement generation and quantum information transfer between spatially-separated qubits in different cavities

Chui‐Ping Yang, Qi-Ping Su, Franco Nori

The generation and control of quantum states of spatially-separated qubits distributed in different cavities constitute fundamental tasks in cavity quantum electrodynamics (QED). An interesting question in this context is how to prepare entanglement and realize quantum information transfer between qubits located at different cavities, which are important in large-scale quantum information processing. In this paper, we consider a physical system consisting of two cavities and three qubits. Two of the qubits are placed in two different cavities while the remaining one acts as a coupler, which is used to connect the two cavities. We propose an approach for generating quantum entanglement and implementing quantum information transfer between the two spatially-separated inter-cavity qubits. The quantum operations involved in this proposal are performed by a virtual photon process; thus the cavity decay is greatly suppressed during operations. In addition, to complete these tasks, only one coupler qubit and one operation step are needed. Moreover, there is no need to apply classical pulses, so that the engineering complexity is much reduced and the operation procedure is greatly simplified. Finally, our numerical results illustrate that high-fidelity implementation of this proposal using superconducting phase qubits and one-dimensional transmission line resonators is feasible for current circuit QED implementations. This proposal can also be applied to other types of superconducting qubits, including flux and charge qubits.

arXiv:1307.2503•New Journal of Physics•Nov 1, 2013•40 citations
The integration of superconducting qubits and resonators in one circuit offers a promising solution for quantum information processing (QIP), which also realizes the on-chip analogue of cavity quantum electrodynamics (QED), known as circuit QED. In most prototype circuit designs, qubits are active processing elements and resonators are peripherals. As resonators typically have better coherence performance and more accessible energy levels, it is proposed that the entangled qubit–resonator hybrid can be used as a processing element. To achieve such a goal, an accurate measurement of the hybrid is first necessary. Here we demonstrate a joint quantum state tomography (QST) technique to fully characterize an entangled qubit–resonator hybrid. We benchmarked our QST technique by generating and accurately characterizing multiple states, e.g. | gN 〉 + | e ( N − 1)〉 where (| g 〉 and | e 〉) are the ground and excited states of the qubit and (|0〉,...,| N 〉) are Fock states of the resonator. We further provided a numerical method to improve the QST efficiency and measured the decoherence dynamics of the bipartite hybrid, witnessing dissipation coming from both the qubit and the N -photon Fock state. As such, the joint QST presents an important step toward actively using the qubit–resonator element for QIP in hybrid quantum devices and for studying circuit QED.
Hybrid W entangled states are essential in quantum information processing, quantum communication, and quantum technology. In this Letter, we propose a simple method to prepare hybrid W entangled states between n superconducting (SC) qubits and n microwave resonators (MRs) in circuit QED. Only two basic operations are needed for the preparation of hybrid W states. The operational time decreases as the number of qubits increases. Since no ancillary cavity is required, the hardware resources for the state preparation are minimized. Because the state preparation does not involve any measurements, the hybrid W entangled states are generated in a deterministic way. Moreover, during the entire preparation, the high-energy levels of the SC qutrits remain unexcited, which greatly reduces decoherence of the SC qutrits. As an example, our numerical simulation demonstrates that high-fidelity preparation of the hybrid W entangled state of three SC qubits and three MRs is feasible within the current circuit QED technique. This method is universal and can be applied to generate hybrid W states of n matter qubits (e.g., atomic qubits, NV center qubits, quantum dot qubits, and magnon qubits) and n photonic qubits in various physical systems.
In this thesis, experimentally relevant aspects and open questions of quantum information processing and measurement in circuit quantum electrodynamics have been investigated theoretically. Circuit quantum electrodynamics is a relatively young field combining superconducting transmission line resonators on-chip with superconducting quantum bits which serve as artificial atoms. Remarkable experiments have underlined the prospects of circuit QED as a possible architecture for quantum information processing as well as a framework within which quantum optics experiments can be performed. In contrast to their optical counterparts, these experiments reach the ultra-strong coupling limit and allow e.g. the generation of Fock states, the study of decoherence and the observation of quantum jumps. We present the physics of superconducting circuits based on the Josephson junction as a non-linear circuit element. We discuss the various types of quantum bits (qubits) before turning to an introduction on cavity QED and conclude the introduction with a brief presentation of the most relevant experiments and a short introduction to the principles and prospects of quantum information processing. Building on the pioneering theoretical and experimental work in which up to three qubits have been integrated on a chip and successfully coupled via a cavity mode, we propose a scheme to overcome the natural limits concerning scalability in these systems. Usually, scalability is severely limited by the resonance width of the qubit transitions and the attainable frequency range for both qubit transition and cavity resonance frequencies. This limits the present setups to at most ten qubits. As a possible solution, we propose and investigate a cross-bar grid layout of cavities with qubits at the intersections. It turns out that this setup, allowing for up to about 1000 qubits, offers significant advantages over e.g. nearest-neighbor coupling schemes. In addition, it can serve as a building block for a truly scalable scheme for fault-tolerant quantum information processing with superconducting circuits by combining 7x7 arrays in a staircase manner. Furthermore, we discuss and simulate different possibilities to improve upon the suggested scheme by e.g. using resonant gates and optimal control theory. Another focus of the present thesis is measurement physics. In order to investigate e.g. the possibilities of using a circuit QED system to dispersively detect single microwave photons or to generate multi-qubit entangled states, we introduce in a pedagogical manner the basics of stochastic master equations which generate quantum trajectories before turning to concrete applications. Quantum trajectories have proven to be a state-of-the-art tool to analyze measurement situations in a very realistic manner by giving access to both the measurement record as well as the internal quantum dynamics conditioned on this record. Using the method of quantum trajectories as generated by stochastic master equations, we discuss a scheme to efficiently generate multi-qubit entangled states in a very flexible way. The method is based on a collective, dispersive qubit readout. By this measurement, a suitable product state of N qubits can be reliably converted into e.g. an N-qubit Greenberger-Horne-Zeilinger or W state. We propose and discuss the scheme and investigate the effects of decoherence and parameter spread as they would be encountered in experiment. Last but not least, we propose and fully analyze a scheme to dispersively detect single itinerant microwave photons. While experiments to generate single microwave photons have already been successfully performed, their single-shot quantum non-demolition detection has not been possible so far. The scheme presented in this thesis closes this gap in the circuit QED toolbox and reaches detection efficiencies of 30% only limited by fundamental quantum mechanics in this case the Quantum Zeno effect. This detection scheme could be used in quantum communication or quantum cryptography applications.
In this paper, the coherent interaction of individual microwave photons with superconducting qubits is presented both for quantum information processing and for novel quantum optics experiments in the circuit quantum electrodynamics (QED) architecture. In the resonant regime we observe the vacuum Rabi mode splitting. In the non-resonant regime we use the dispersive coupling between the qubit and the cavity field to perform high visibility quantum non-demolition (QND) measurements of the qubit state. In the strong dispersive limit we also perform measurements of the cavity state from which the photon number statistics of the field can be extracted. Generally, the circuit QED architecture is attractive for quantum information processing and as an interface in hybrid quantum systems.
High-dimensional quantum systems, known as qudits with dimension d>2d>2d>2, possess the capability to encode and process more information than traditional two-dimensional qubits. Entangled states serve as crucial resources for both quantum computation and quantum communication. On the basis of circuit quantum electrodynamics (QED) systems, we introduce an efficient scheme to deterministically generate high-dimensional multipartite entangled states of hybrid qutrits (d=3d=3d=3). Assuming a simple initial state has already been prepared with the use of local operations, our method requires only a single step to produce hybrid Greenberger-Horne-Zeilinger (GHZ) entangled states among circuit QED systems consisting of superconducting qutrits and a superconducting cavity. Remarkably, the number of steps and the operational time remain constant as the number of qutrits increases, highlighting the efficiency and scalability of our approach. Using numerical simulations for a three-dimensional hybrid GHZ state of seven qutrits, we demonstrate the feasibility of our scheme and study the effects of various parameters on the fidelity. The importance of this research is in directing the experimental creation of multipartite, high-dimensional, and hybrid GHZ states, which can then be used to enhance quantum communication protocols and computational processes.
Hybrid entangled states are essential quantum resources not only for hybrid quantum communication but also for creating robust hybrid quantum networks and processors.By considering a circuit-cavity quantum electrodynamics (QED) system composed of a superconducting (SC) qutrit (a three-level quantum system) and n microwave cavities, we here present a method to prepare hybrid Greenberger-Horne-Zeilinger (GHZ) entangled states of n+1 qubits.The use of a single SC qutrit as the coupler leads to a significant saving in circuit hardware resources.The GHZ state preparation is deterministic without measurement.The operation time for the GHZ state preparation is independent of the number of qubits.Decoherence from the highest energy level of the SC qutrit is suppressed because this level remains unoccupied during the GHZ state preparation.Our numerical simulations demonstrate that the high-fidelity generation of hybrid GHZ states of an SC qubit and three photonic qubits is achievable within current circuit-QED technology.The proposed scheme possesses universality and is suitable for preparing hybrid GHZ states of a matter qubit (e.g., atomic qubit, trapped ion, quantum dot, magnon, NV center, and SC qubit with various types) and multiple photonic qubits across a wide range of physical systems.
The generation and control of quantum states of spatially-separated qubits distributed in different cavities constitute fundamental tasks in cavity quantum electrodynamics (QED). An interesting question in this context is how to prepare entanglement and realize quantum information transfer between qubits located at different cavities, which are important in large-scale quantum information processing. In this paper, we consider a physical system consisting of two cavities and three qubits. Two of the qubits are placed in two different cavities while the remaining one acts as a coupler, which is used to connect the two cavities. We propose an approach for generating quantum entanglement and implementing quantum information transfer between the two spatially-separated inter-cavity qubits. The quantum operations involved in this proposal are performed by a virtual photon process; thus the cavity decay is greatly suppressed during operations. In addition, to complete these tasks, only one coupler qubit and one operation step are needed. Moreover, there is no need to apply classical pulses, so that the engineering complexity is much reduced and the operation procedure is greatly simplified. Finally, our numerical results illustrate that high-fidelity implementation of this proposal using superconducting phase qubits and one-dimensional transmission line resonators is feasible for current circuit QED implementations. This proposal can also be applied to other types of superconducting qubits, including flux and charge qubits.