Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Russian Mathematical Surveys

Quantum computations: algorithms and error correction

Alexei Kitaev

Published Dec 31, 1997• 1,489 citations
Publisher

Abstract

Contents §0. Introduction §1. Abelian problem on the stabilizer §2. Classical models of computations 2.1. Boolean schemes and sequences of operations 2.2. Reversible computations §3. Quantum formalism 3.1. Basic notions and notation 3.2. Transformations of mixed states 3.3. Accuracy §4. Quantum models of computations 4.1. Definitions and basic properties 4.2. Construction of various operators from the elements of a basis 4.3. Generalized quantum control and universal schemes §5. Measurement operators §6. Polynomial quantum algorithm for the stabilizer problem §7. Computations with perturbations: the choice of a model §8. Quantum codes (definitions and general properties) 8.1. Basic notions and ideas 8.2. One-to-one codes 8.3. Many-to-one codes §9. Symplectic (additive) codes 9.1. Algebraic preparation 9.2. The basic construction 9.3. Error correction procedure 9.4. Torus codes §10. Error correction in the computation process: general principles 10.1. Definitions and results 10.2. Proofs §11. Error correction: concrete procedures 11.1. The symplecto-classical case 11.2. The case of a complete basis Bibliography

DOI
10.1070/rm1997v052n06abeh002155

Related papers

Practical Advances in Quantum Error Correction & Communication

Daniel Benjamin Criger

Quantum computing exists at the intersection of mathematics, physics, chemistry, and engineering; the main goal of quantum computing is the creation of devices and algorithms which use the properties of quantum mechanics to store, manipulate and measure information. There exist many families of algorithms, which, using non-classical logical operations, can outperform traditional, classical algorithms in terms of memory and processing requirements. In addition, quantum computing devices are fundamentally smaller than classical processors and memory elements; since the physical models governing their performance are applicable on all scales, as opposed to classical logic elements, whose underlying principles rely on the macroscopic nature of the device in question. \n \nQuantum algorithms, for the most part, are predicated on a theory of resources. It is often assumed that quantum computers can be placed in a precise fiducial state prior to computation, and that logical operations are perfect, inducing no error on the system which they affect. These assumptions greatly simplify algorithmic design, but are fundamentally unrealistic. In order to justify their use, it is necessary to develop a framework for using a large number of imperfect devices to simulate the action of a perfect device, with some acceptable probability of failure. This is the study of fault-tolerant quantum computing. In order to pursue this study effectively, it is necessary to understand the fundamental nature of generic quantum states and operations, as well as the means by which one can correct quantum errors. Additionally, it is important to attempt to minimize the use of computational resources in achieving error reduction and fault-tolerant computing. \n \nThis thesis is concerned with three projects related to the use of error-prone quantum systems to transmit and manipulate information. The first of these is concerned with the use of imperfectly-prepared states in error-correction routines. Using optimal quantum error correction, we are able to deduce a method of partially protecting encoded quantum information against preparation errors prior to encoding, using no additional qubits. The second of these projects details the search for entangled states which can be used to transmit classical information over quantum channels at a rate superior to classical states. The third of these projects concerns the transcoding of data from one quantum code into another using few ancillary resources. The descriptions of these projects are preceded by a brief introduction to representations of quantum states and channels, for completeness. \n \nThree techniques of general interest are presented in appendices. The first is an introduction to, and a minor advance in the development of optimal error correction codes. The second is a more efficient means of calculating the action of a quantum channel on a given state, given that the channel acts non-trivially only on a subsystem, rather than the entire system. Finally, we include documentation on a software package developed to aid the search for quantum transcoding operations.

•Oct 25, 2013•1 citation

A physics-free introduction to quantum error correcting codes

Martin, William J.

Research in the field of quantum algorithms and quantum error correction is progressing at an astounding rate. There are many good papers on both subjects, but reading even a few of these may seem a daunting task to the newcomer. The aim of this paper is to give a leisurely introduction to the basic theory of quantum error correcting codes without appealing to even the most basic notions in physics. Thus the article is not a substitute for important papers such as [12] or [7] but rather an advertisement for them. I would be pleased if, in addition, some readers view this as a useful companion article if and when they go on to read more substantial literature on the subject of quantum error correction. I present nothing new here. Rather, I give an elementary account of the important theorems and proofs which appear in these fundamental works using only undergraduate algebra and a bit of classical coding theory. In particular, I give a full proof of the Knill/Laflamme theorem as well as an elementary treatment of stabilizer codes. The goal is to make the literature dealing with this exciting new area more accessible to discrete mathematicians.

Utilitas Mathematica•May 9, 2004•0 citations

An Introduction to Quantum Error Correction

Daniel Gottesman

Quantum states are very delicate, so it is likely some sort of quantum error correction will be necessary to build reliable quantum computers. The theory of quantum error-correcting codes has some close ties to and some striking differences from the theory of classical error-correcting codes. Many quantum codes can be described in terms of the stabilizer of the codewords. The stabilizer is a finite Abelian group, and allows a straightforward characterization of the error-correcting properties of the code. The stabilizer formalism for quantum codes also illustrates the relationships to classical coding theory, particularly classical codes over GF(4), the finite field with four elements.

arXiv:quant-ph/0004072•Apr 18, 2000•103 citations

Quantum computation

This chapter introduces the basic principles of quantum computation. We shall adhere to the quantum circuit model of computation, with which it is easy to work and which is close to physical implementations. We shall not discuss the more abstract quantum Turing machine model, which, however, has been shown to be equivalent to the circuit model. The elementary unit of quantum information and the basic building block of quantum computation is the qubit, a two-level quantum system that can be prepared, manipulated and measured in a controlled way. A quantum computer can be seen as a collection of n qubits and therefore its wave function resides in a 2 n -dimensional complex Hilbert space. As far as coupling to the environment may be neglected, its evolution in time is unitary and governed by the Schrödinger equation. A quantum computation is composed of three basic steps: preparation of the input state, implementation of the desired unitary transformation acting on this state and measurement of the output state. The output of the measurement process is inherently probabilistic and the probabilities of the different possible outputs are set by the basic postulates of quantum mechanics. Therefore, in a quantum algorithm we must, in general, repeat several times the algorithm to obtain the correct solution of our problem with probability as close to one as desired. In this sense, quantum algorithms are analogous to classical probabilistic algorithms. However, the superposition principle and quantum entanglement open up new possibilities for computation. Quantum computers are potentially more powerful than classical (deterministic or probabilistic) computers due to quantum interference and entanglement. We show that, analogously to classical computation, there exists a small set of gates that are universal, that is, any unitary transformation can be decomposed into a sequence of these gates. We then discuss the implementation of the basic Boolean functions and arithmetic operations on a quantum computer.

WORLD SCIENTIFIC eBooks•Dec 1, 2018•0 citations

Quantum Error Correction

Phillip Kaye, Raymond Laflamme, Michele Mosca

A mathematical model of computation is an idealized abstraction. We design algorithms and perform analysis on the assumption that the mathematical operations we specify will be carried out exactly, and without error. Physical devices that implement an abstract model of computation are imperfect and of limited precision. For example, when a digital circuit is implemented on a physical circuit board, unwanted electrical noise in the environment may cause components to behave differently than expected, and may cause voltage levels (bit-values) to change. These sources of error must be controlled or compensated for, or else the resulting loss of efficiency may reduce the power of the information-processing device. If individual steps in a computation succeed with probability p, then a computation involving t sequential steps will have a success probability that decreases exponentially as pt. Although it may be impossible to eliminate the sources of errors, we can devise schemes to allow us to recover from errors using a reasonable amount of additional resources. Many classical digital computing devices use error-correcting codes to perform detection of and recovery from errors. The theory of error-correcting codes is itself a mathematical abstraction, but it is one that explicitly accounts for errors introduced by the imperfection and imprecision of realistic devices. This theory has proven extremely effective in allowing engineers to build computing devices that are resilient against errors. Quantum computers are more susceptible to errors than classical digital computers, because quantum mechanical systems are more delicate and more difficult to control. If large-scale quantum computers are to be possible, a theory of quantum error correction is needed. The discovery of quantum error correction has given researchers confidence that realistic large-scale quantum computing devices can be built despite the presence of errors. We begin by considering fundamental concepts for error correction in a classical setting. We will focus on three of these concepts: (a) the characterization of the error model, (b) the introduction of redundancy through encoding, and (c) an error recovery procedure. We will later see that these concepts generalize quite naturally for quantum error correction.

Oxford University Press eBooks•Nov 16, 2006•0 citations

Stabilizer codes from modified symplectic forms

Tejas Gandhi, Piyush P. Kurur, Rajat Mittal

In this paper, we construct explicit families of quantum error correcting codes based on cyclic codes. But for a crucial theoretical idea that we introduce here, namely working with a modified symplectic form as the basis of Weyl commutation, these codes would not have been possible - under the standard symplectic form, there are Galois theoretic no-go theorems on cyclic codes [7], [Corollary IV.5, page 651], [6], [Corollary 5.16, page 51] of certain lengths. More importantly, we circumvent the above no-go theorems without disturbing the one crucial property that cyclic codes have - efficient decoding algorithms. Recall that for general codes, efficient decoding algorithms do not exist if some widely believed complexity theoretic assumptions are true hence this is a crucial property to have. Cyclicity is a basis dependent property and for codes that we construct, is only evident in the modified symplectic setting. If we were to recast this code using the standard symplectic form, there would be a basis change on the underlying vector space that disturbs cyclicity. Hence, this change of perspective that we have here is crucial not only in the construction, where we had to circumvent the no-go theorems that we mentioned above, but also in the design of efficient decoding algorithm. Theoretically our result is also tight: we have a complete characterization (Theorem 6) of the codes that we construct here.

IEEE International Symposium on Information Theory (ISIT)•Jul 1, 2019•5 citations
Contents §0. Introduction §1. Abelian problem on the stabilizer §2. Classical models of computations 2.1. Boolean schemes and sequences of operations 2.2. Reversible computations §3. Quantum formalism 3.1. Basic notions and notation 3.2. Transformations of mixed states 3.3. Accuracy §4. Quantum models of computations 4.1. Definitions and basic properties 4.2. Construction of various operators from the elements of a basis 4.3. Generalized quantum control and universal schemes §5. Measurement operators §6. Polynomial quantum algorithm for the stabilizer problem §7. Computations with perturbations: the choice of a model §8. Quantum codes (definitions and general properties) 8.1. Basic notions and ideas 8.2. One-to-one codes 8.3. Many-to-one codes §9. Symplectic (additive) codes 9.1. Algebraic preparation 9.2. The basic construction 9.3. Error correction procedure 9.4. Torus codes §10. Error correction in the computation process: general principles 10.1. Definitions and results 10.2. Proofs §11. Error correction: concrete procedures 11.1. The symplecto-classical case 11.2. The case of a complete basis Bibliography
Quantum computing exists at the intersection of mathematics, physics, chemistry, and engineering; the main goal of quantum computing is the creation of devices and algorithms which use the properties of quantum mechanics to store, manipulate and measure information. There exist many families of algorithms, which, using non-classical logical operations, can outperform traditional, classical algorithms in terms of memory and processing requirements. In addition, quantum computing devices are fundamentally smaller than classical processors and memory elements; since the physical models governing their performance are applicable on all scales, as opposed to classical logic elements, whose underlying principles rely on the macroscopic nature of the device in question. \n \nQuantum algorithms, for the most part, are predicated on a theory of resources. It is often assumed that quantum computers can be placed in a precise fiducial state prior to computation, and that logical operations are perfect, inducing no error on the system which they affect. These assumptions greatly simplify algorithmic design, but are fundamentally unrealistic. In order to justify their use, it is necessary to develop a framework for using a large number of imperfect devices to simulate the action of a perfect device, with some acceptable probability of failure. This is the study of fault-tolerant quantum computing. In order to pursue this study effectively, it is necessary to understand the fundamental nature of generic quantum states and operations, as well as the means by which one can correct quantum errors. Additionally, it is important to attempt to minimize the use of computational resources in achieving error reduction and fault-tolerant computing. \n \nThis thesis is concerned with three projects related to the use of error-prone quantum systems to transmit and manipulate information. The first of these is concerned with the use of imperfectly-prepared states in error-correction routines. Using optimal quantum error correction, we are able to deduce a method of partially protecting encoded quantum information against preparation errors prior to encoding, using no additional qubits. The second of these projects details the search for entangled states which can be used to transmit classical information over quantum channels at a rate superior to classical states. The third of these projects concerns the transcoding of data from one quantum code into another using few ancillary resources. The descriptions of these projects are preceded by a brief introduction to representations of quantum states and channels, for completeness. \n \nThree techniques of general interest are presented in appendices. The first is an introduction to, and a minor advance in the development of optimal error correction codes. The second is a more efficient means of calculating the action of a quantum channel on a given state, given that the channel acts non-trivially only on a subsystem, rather than the entire system. Finally, we include documentation on a software package developed to aid the search for quantum transcoding operations.
Research in the field of quantum algorithms and quantum error correction is progressing at an astounding rate. There are many good papers on both subjects, but reading even a few of these may seem a daunting task to the newcomer. The aim of this paper is to give a leisurely introduction to the basic theory of quantum error correcting codes without appealing to even the most basic notions in physics. Thus the article is not a substitute for important papers such as [12] or [7] but rather an advertisement for them. I would be pleased if, in addition, some readers view this as a useful companion article if and when they go on to read more substantial literature on the subject of quantum error correction. I present nothing new here. Rather, I give an elementary account of the important theorems and proofs which appear in these fundamental works using only undergraduate algebra and a bit of classical coding theory. In particular, I give a full proof of the Knill/Laflamme theorem as well as an elementary treatment of stabilizer codes. The goal is to make the literature dealing with this exciting new area more accessible to discrete mathematicians.
Quantum states are very delicate, so it is likely some sort of quantum error correction will be necessary to build reliable quantum computers. The theory of quantum error-correcting codes has some close ties to and some striking differences from the theory of classical error-correcting codes. Many quantum codes can be described in terms of the stabilizer of the codewords. The stabilizer is a finite Abelian group, and allows a straightforward characterization of the error-correcting properties of the code. The stabilizer formalism for quantum codes also illustrates the relationships to classical coding theory, particularly classical codes over GF(4), the finite field with four elements.
This chapter introduces the basic principles of quantum computation. We shall adhere to the quantum circuit model of computation, with which it is easy to work and which is close to physical implementations. We shall not discuss the more abstract quantum Turing machine model, which, however, has been shown to be equivalent to the circuit model. The elementary unit of quantum information and the basic building block of quantum computation is the qubit, a two-level quantum system that can be prepared, manipulated and measured in a controlled way. A quantum computer can be seen as a collection of n qubits and therefore its wave function resides in a 2 n -dimensional complex Hilbert space. As far as coupling to the environment may be neglected, its evolution in time is unitary and governed by the Schrödinger equation. A quantum computation is composed of three basic steps: preparation of the input state, implementation of the desired unitary transformation acting on this state and measurement of the output state. The output of the measurement process is inherently probabilistic and the probabilities of the different possible outputs are set by the basic postulates of quantum mechanics. Therefore, in a quantum algorithm we must, in general, repeat several times the algorithm to obtain the correct solution of our problem with probability as close to one as desired. In this sense, quantum algorithms are analogous to classical probabilistic algorithms. However, the superposition principle and quantum entanglement open up new possibilities for computation. Quantum computers are potentially more powerful than classical (deterministic or probabilistic) computers due to quantum interference and entanglement. We show that, analogously to classical computation, there exists a small set of gates that are universal, that is, any unitary transformation can be decomposed into a sequence of these gates. We then discuss the implementation of the basic Boolean functions and arithmetic operations on a quantum computer.
A mathematical model of computation is an idealized abstraction. We design algorithms and perform analysis on the assumption that the mathematical operations we specify will be carried out exactly, and without error. Physical devices that implement an abstract model of computation are imperfect and of limited precision. For example, when a digital circuit is implemented on a physical circuit board, unwanted electrical noise in the environment may cause components to behave differently than expected, and may cause voltage levels (bit-values) to change. These sources of error must be controlled or compensated for, or else the resulting loss of efficiency may reduce the power of the information-processing device. If individual steps in a computation succeed with probability p, then a computation involving t sequential steps will have a success probability that decreases exponentially as pt. Although it may be impossible to eliminate the sources of errors, we can devise schemes to allow us to recover from errors using a reasonable amount of additional resources. Many classical digital computing devices use error-correcting codes to perform detection of and recovery from errors. The theory of error-correcting codes is itself a mathematical abstraction, but it is one that explicitly accounts for errors introduced by the imperfection and imprecision of realistic devices. This theory has proven extremely effective in allowing engineers to build computing devices that are resilient against errors. Quantum computers are more susceptible to errors than classical digital computers, because quantum mechanical systems are more delicate and more difficult to control. If large-scale quantum computers are to be possible, a theory of quantum error correction is needed. The discovery of quantum error correction has given researchers confidence that realistic large-scale quantum computing devices can be built despite the presence of errors. We begin by considering fundamental concepts for error correction in a classical setting. We will focus on three of these concepts: (a) the characterization of the error model, (b) the introduction of redundancy through encoding, and (c) an error recovery procedure. We will later see that these concepts generalize quite naturally for quantum error correction.
In this paper, we construct explicit families of quantum error correcting codes based on cyclic codes. But for a crucial theoretical idea that we introduce here, namely working with a modified symplectic form as the basis of Weyl commutation, these codes would not have been possible - under the standard symplectic form, there are Galois theoretic no-go theorems on cyclic codes [7], [Corollary IV.5, page 651], [6], [Corollary 5.16, page 51] of certain lengths. More importantly, we circumvent the above no-go theorems without disturbing the one crucial property that cyclic codes have - efficient decoding algorithms. Recall that for general codes, efficient decoding algorithms do not exist if some widely believed complexity theoretic assumptions are true hence this is a crucial property to have. Cyclicity is a basis dependent property and for codes that we construct, is only evident in the modified symplectic setting. If we were to recast this code using the standard symplectic form, there would be a basis change on the underlying vector space that disturbs cyclicity. Hence, this change of perspective that we have here is crucial not only in the construction, where we had to circumvent the no-go theorems that we mentioned above, but also in the design of efficient decoding algorithm. Theoretically our result is also tight: we have a complete characterization (Theorem 6) of the codes that we construct here.