Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE Transactions on Applied Superconductivity

Josephson voltage standard microwave circuits operating at 10 GHz

H.‐G. Meyer, Heiner Kohler, G. Wende, A. Chwala

Published Jun 1, 1995• 3 citations
Publisher

Abstract

A new type of microwave circuit for the generation of frequency-scaled voltages is investigated. The circuit is designed as a superconducting microstrip line resonator and series arrays of Josephson tunnel junctions located within the rf current antinodes. The circuits are designed to obtain highly accurate voltages at low rf power level and low frequencies of about 10 GHz. For a resonator circuit with 432 junctions driven at about 10 GHz we have observed steps up to 0.25 V, the lifetime of which is about 20 minutes.>

DOI
10.1109/77.403200

Related papers

Josephson voltage standard microwave circuit driven at 10 GHz

H.‐G. Meyer, Heiner Kohler, G. Wende +5 more

We have investigated a new type of microwave circuit for the generation of frequency-scaled Josephson voltages useful for the representation of highly accurate reference voltages. The circuit consists of a superconducting microstrip resonator and series arrays of Josephson junctions integrated within its rf current antinodes. The circuit is designed to operate at low frequencies of about 10 GHz to simplify the microwave techniques. At a resonator circuit with four Josephson junctions driven at 10.9 GHz we have obtained stable overlapping Shapiro steps up to 4.6 mV at a step width of about 70 µA. A more advanced double-resonator circuit with altogether 216 junctions allows to generate scaled reference voltages up to 0.16 V at steps of about 25 µA in width and at a microwave frequency of 11.1 GHz.

Journal de Physique IV (Proceedings)•Jun 1, 1994•0 citations

Josephson voltage standard cryoelectronic circuits in Nb/Al/sub 2/O/sub 3//Nb technology operating at low drive frequencies

G. Wende, Ludwig Fritzsch, Heiner Kohler +2 more

A new type of cryoelectronic microwave circuits in Nb/Al/sub 2/O/sub 3//Nb technology for the generation of frequency-scaled Josephson voltages is presented. The circuits consist of superconducting microstripline resonators with series arrays of Josephson tunnel junctions located on the rf current antinodes. The circuits are designed to obtain highly accurate Josephson voltages at low rf power levels and low drive frequencies. At present, we have observed Josephson voltages up to 0.66 V in a resonator circuit with 1456 junctions.

Conference on Precision Electromagnetic Measurements•Dec 23, 2002•0 citations

Josephson voltage standard microwave circuits fabricated in a modified all-niobium technology for operation at low drive frequencies

H.‐G. Meyer, G. Wende, Ludwig Fritzsch +2 more

A resonant type of cryoelectronic microwave circuit for the generation of frequency-scaled Josephson voltages is presented. The circuits consist of superconducting microstripline resonators with series arrays of Josephson tunnel junctions located on the microwave current antinodes. This microwave design was chosen to obtain highly accurate Josephson voltages at low microwave power levels and low drive frequencies. The resonator circuits have been fabricated in both niobium-lead and all-niobium technology. At present, we have observed long-term stable Josephson voltages up to 0.75 V for niobium-lead circuits with 1320 junctions and 0.66 V for all-niobium circuits with 1456 junctions, respectively.

IEEE Transactions on Applied Superconductivity•Jun 1, 1997•2 citations

Josephson voltage standard at low drive frequencies

H.‐G. Meyer, Heiner Kohler, F. Muller +3 more

The authors report on the design and operation of a superconducting microstrip resonator containing four series-connected highly hysteretic Josephson junctions in the top layer. This arrangement generates constant-voltage steps at X-band drive frequencies useful for a Josephson voltage standard. At 12 GHz, steps up to 5 mV have been obtained with step amplitudes of about 100 mu A. The resonator principle can be used to save microwave power and to simplify the microwave circuit. To obtain sufficiently large and stable steps the critical current density and the junction length must be matched carefully with the order of maximum step used for the operation of the Josephson voltage standard. The X-band microwave drive frequencies offer substantial advantages in terms of costs and handling of microwave equipment.>

IEEE Transactions on Applied Superconductivity•Mar 1, 1993•12 citations

Superconducting MMICs with 1474 Josephson Junctions Providing Standard Voltages up to 1.2 Volt

Johann Heyen Hinken, Jurgen Niemeyer, Richard L. Kautz

High precision dc voltage standards utilize microwave induced constant voltage steps occurring due to the ac Josephson effect. Existing standards can be considerably simplified and improved by using a large number of series-connected Josephson tunnel junctions which are operated in the zero current step mode. For this purpose superconducting millimeter wave integrated circuits (MMICs) have been designed, fabricated and tested. The circuits consist of a broadband taper between the waveguide and antipodal fin line, a transition to microstrip, the Josephson junction series, a well-matched load, and dc pads. Circuits with various numbers of junctions have been fabricated by photolithographic techniques and tested at 4.2 K in liquid helium. The version with 1474 junctions produced voltages up to 1.2 V when operated at 90 GHz.

European Microwave Conference (EuMC)•Oct 1, 1984•3 citations

Hybrid integration of microwave oscillators with Josephson series arrays for the use as voltage standards

Franz X. Hebrank, P. Gutmann, F. Muller +2 more

We have designed and fabricated a new type of Josephson device to be hybrid integrated with microstripline oscillators. For optimum matching of the Josephson series array to the oscillator the samples make use of a new stripline design. The first circuits were fabricated in a simplified Nb/Al/sub 2/O/sub 3//Nb technology and exhibit excellent dc characteristics and good microwave coupling to the junctions of the array. At 70 GHz constant voltage steps up to 350 mV could be observed. By hybrid integrating different samples with a new 10-GHz oscillator, constant voltage steps were created. For this experiment the Josephson current density had to be low enough to reduce the plasma frequency of the junctions to well below the driving frequency.>

IEEE Transactions on Applied Superconductivity•Jun 1, 1995•5 citations
A new type of microwave circuit for the generation of frequency-scaled voltages is investigated. The circuit is designed as a superconducting microstrip line resonator and series arrays of Josephson tunnel junctions located within the rf current antinodes. The circuits are designed to obtain highly accurate voltages at low rf power level and low frequencies of about 10 GHz. For a resonator circuit with 432 junctions driven at about 10 GHz we have observed steps up to 0.25 V, the lifetime of which is about 20 minutes.>
We have investigated a new type of microwave circuit for the generation of frequency-scaled Josephson voltages useful for the representation of highly accurate reference voltages. The circuit consists of a superconducting microstrip resonator and series arrays of Josephson junctions integrated within its rf current antinodes. The circuit is designed to operate at low frequencies of about 10 GHz to simplify the microwave techniques. At a resonator circuit with four Josephson junctions driven at 10.9 GHz we have obtained stable overlapping Shapiro steps up to 4.6 mV at a step width of about 70 µA. A more advanced double-resonator circuit with altogether 216 junctions allows to generate scaled reference voltages up to 0.16 V at steps of about 25 µA in width and at a microwave frequency of 11.1 GHz.
A new type of cryoelectronic microwave circuits in Nb/Al/sub 2/O/sub 3//Nb technology for the generation of frequency-scaled Josephson voltages is presented. The circuits consist of superconducting microstripline resonators with series arrays of Josephson tunnel junctions located on the rf current antinodes. The circuits are designed to obtain highly accurate Josephson voltages at low rf power levels and low drive frequencies. At present, we have observed Josephson voltages up to 0.66 V in a resonator circuit with 1456 junctions.
A resonant type of cryoelectronic microwave circuit for the generation of frequency-scaled Josephson voltages is presented. The circuits consist of superconducting microstripline resonators with series arrays of Josephson tunnel junctions located on the microwave current antinodes. This microwave design was chosen to obtain highly accurate Josephson voltages at low microwave power levels and low drive frequencies. The resonator circuits have been fabricated in both niobium-lead and all-niobium technology. At present, we have observed long-term stable Josephson voltages up to 0.75 V for niobium-lead circuits with 1320 junctions and 0.66 V for all-niobium circuits with 1456 junctions, respectively.
The authors report on the design and operation of a superconducting microstrip resonator containing four series-connected highly hysteretic Josephson junctions in the top layer. This arrangement generates constant-voltage steps at X-band drive frequencies useful for a Josephson voltage standard. At 12 GHz, steps up to 5 mV have been obtained with step amplitudes of about 100 mu A. The resonator principle can be used to save microwave power and to simplify the microwave circuit. To obtain sufficiently large and stable steps the critical current density and the junction length must be matched carefully with the order of maximum step used for the operation of the Josephson voltage standard. The X-band microwave drive frequencies offer substantial advantages in terms of costs and handling of microwave equipment.>
High precision dc voltage standards utilize microwave induced constant voltage steps occurring due to the ac Josephson effect. Existing standards can be considerably simplified and improved by using a large number of series-connected Josephson tunnel junctions which are operated in the zero current step mode. For this purpose superconducting millimeter wave integrated circuits (MMICs) have been designed, fabricated and tested. The circuits consist of a broadband taper between the waveguide and antipodal fin line, a transition to microstrip, the Josephson junction series, a well-matched load, and dc pads. Circuits with various numbers of junctions have been fabricated by photolithographic techniques and tested at 4.2 K in liquid helium. The version with 1474 junctions produced voltages up to 1.2 V when operated at 90 GHz.
We have designed and fabricated a new type of Josephson device to be hybrid integrated with microstripline oscillators. For optimum matching of the Josephson series array to the oscillator the samples make use of a new stripline design. The first circuits were fabricated in a simplified Nb/Al/sub 2/O/sub 3//Nb technology and exhibit excellent dc characteristics and good microwave coupling to the junctions of the array. At 70 GHz constant voltage steps up to 350 mV could be observed. By hybrid integrating different samples with a new 10-GHz oscillator, constant voltage steps were created. For this experiment the Josephson current density had to be low enough to reduce the plasma frequency of the junctions to well below the driving frequency.>