To utilize a single atom as a quantum bit for a quantum computer requires exquisite\ncontrol over the internal and external degrees of freedom. This thesis develops techniques\nfor controlling the external degrees of freedom of individual atoms. In the first part of\nthis thesis, individual atoms are trapped and detected non-destructively by the addition of\ncooling beams in an optical lattice. This non-destructive imaging technique led to atomic\nstorage times of two minutes in an optical lattice. The second part of thesis incorporated\nthe individual atoms into a high finesse cavity. Inside this optical cavity, atoms are cooled\nand non-destructively observed for up to 10 seconds.
To utilize a single atom as a quantum bit for a quantum computer requires exquisite\ncontrol over the internal and external degrees of freedom. This thesis develops techniques\nfor controlling the external degrees of freedom of individual atoms. In the first part of\nthis thesis, individual atoms are trapped and detected non-destructively by the addition of\ncooling beams in an optical lattice. This non-destructive imaging technique led to atomic\nstorage times of two minutes in an optical lattice. The second part of thesis incorporated\nthe individual atoms into a high finesse cavity. Inside this optical cavity, atoms are cooled\nand non-destructively observed for up to 10 seconds.
Ultracold neutral atoms confined in optical dipole traps have important applications in quantum computation and information processing, quantum simulators of interacting-many-body systems and atomic frequency metrology. While optical dipole traps are powerful tools for cold atom experiments, the energy level structures of the trapped atoms are shifted by the trapping field, and it is important to characterize these shifts in order to accurately manipulate and control the quantum state of the system.\n\nIn order to measure the light shifts, we have designed a system that allows us to reliably trap individual 87Rb atoms. A non-destructive detection technique is employed so that the trapped atoms can be continuously observed for over 100 seconds. Single atom spectroscopy, trap frequency measurements, and temperature measurements are performed on single atoms in a single focus trap and small number of atoms in a 1D optical lattice in order to characterize the trapping environment, the perturbed energy level structures, and the probe-induced heating.\n\nIn the second part of the thesis, we demonstrate deterministic delivery of an array of individual atoms to an optical cavity and selective addressability of individual atoms in a 1D optical conveyor, which serves as a potential candidate for scalable quantum information processing. The experiment is extended to a dual lattice system coupled to a single cavity with the capability of independent lattice control and addressability. The mutual interactions of atoms in different lattices mediated by a common cavity field are demonstrated. A semi-classical model in the many-atom regime based on the Jaynes-Cummings model is developed to describe the system that is in good qualitative agreement with the data. This work provides a foundation for developing multi-qubit quantum information experiments with a dual lattice cavity system.
Cavity quantum electrodynamics (cavity QED) describes electromagnetic fields in a confined space and the radiative properties of atoms in such fields. The simplest example of such system is a single atom interacting with one mode of a high-finesse resonator. Besides observation and exploration of fundamental quantum mechanical effects, this system bears a high potential for applications quantum information science such as, e.g., quantum logic gates, quantum communication and quantum teleportation. In this thesis I present an experiment on the deterministic coupling of a single neutral atom to the mode of a high-finesse optical resonator. In Chapter 1 I describe our basic techniques for trapping and observing single cesium atoms. As a source of single atoms we use a high-gradient magneto-optical trap, which captures the atoms from background gas in a vacuum chamber and cools them down to millikelvin temperatures. The atoms are then transferred without loss into a standing-wave dipole trap, which provides a conservative potential required for experiments on atomic coherence such as quantum information processing and metrology on trapped atoms. Moreover, shifting the standing-wave pattern allows us to deterministically transport the atoms (Chapter 2). In combination with non-destructive fluorescence imaging of individual trapped atoms, this enables us to control their position with submicrometer precision over several millimeters along the dipole trap. The cavity QED system can distinctly display quantum behaviour in the so-called strong coupling regime, i.e., when the coherent atom-cavity coupling rate dominates dissipation in the system. This sets the main requirements on the resonator's properties: small mode volume and high finesse. Chapter 3 is devoted to the manufacturing, assembling, and testing of an ultra-high finesse optical Fabry-Perot resonator, stabilized to the atomic transition. In Chapter 4 I present the transportation of single atoms into the cavity and their coupling to the cavity mode. The strong coupling manifests itself in a strong reduction of the cavity transmission probed by a weak external laser. The atoms remain trapped and coupled to the cavity mode for several seconds until we move them out of the cavity for final analysis of their number and position.
A neutral atom interacting with a single mode of a high finesse cavity provides an opportunity to study uncharted quantum mechanical systems and to explore the field of quantum computing and networking. Ranging from being a deterministic single photon source to a coherent storage unit for quantum information, a strong coupling cavity QED system has proven to be a powerful tool. In this thesis, single atoms are deterministically delivered over long distances and probed in an optical cavity. Once in the cavity, a single atom is stored and continuously observed for over 15 seconds. Progress towards using atoms in the cavity to produce entangled photon pairs is presented. Dual 1D optical lattices are implemented to create a foundation for advancements in two qubit quantum operations and entanglements.
By integrating the techniques of laser cooling and trapping with those of cavity quantum electrodynamics (QED), single cesium atoms have been trapped within the mode of a small, high finesse optical cavity in a regime of strong coupling. The observed lifetime for individual atoms trapped within the cavity mode is $\ensuremath{\tau}\ensuremath{\approx}28\mathrm{ms}$, and is limited by fluctuations of light forces arising from the far-detuned intracavity field. This initial realization of trapped atoms in cavity QED should enable diverse protocols in quantum information science.
The principle goal of our program is the demonstration of scalable quantum logic between qubits encoded in the internal states of neutral atoms sharing the quantum field of an optical cavity. This requires successful integration of two leading quantum information technologies atom-based quantum memories and cavity QED-based entanglement generation and manipulation. We have developed methods for trapping atoms inside high-finesse optical resonators for scalable quantum logic. Our configuration employs infrared (CO2) laser traps for individual atoms that will permit us to store many individually addressable atoms and to manipulate these atoms in arbitrary combinations using the quantum field of the optical cavity. Importantly, the use of infrared trapping lasers virtually eliminates decoherence due to atomic spontaneous emission, which hinders many AMO-based systems.
In order to study quantum effects such as state superposition and entanglement, one would like to construct simple systems for which the damping rates are slow relative to the rate of coherent evolution. One such system is strong-coupling cavity quantum electrodynamics (QED), in which a single atom is coupled to a single mode of a high finesse optical cavity. In recent years, optical trapping techniques have been applied to the cavity QED system, allowing an individual atom to remain coupled to the cavity for long periods of time. For the purpose of future cavity QED experiments, one would like to gain as much control over the trapped atom as possible; in particular, one would like to cool the center of mass motion of the atom, to measure the magnetic field at the location of the atom, and to be able to prepare the atom in a given internal state. In the first part of this thesis, I present a scheme for driving Raman transitions inside the cavity that can be used to achieve these goals. After giving a detailed theoretical treatment of the Raman scheme, I describe how it can be implemented in the lab and discuss some preliminary experimental results. In the second part of this thesis, I present a number of simple field theory models. These models were developed in an attempt to understand some of the central ideas of theoretical physics by looking at how the ideas work in a highly simplified context. The hope is that by reducing the mathematical complexity of an actual theory, the underlying physical concepts can be more easily understood.