Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Journal of Physics Conference Series

Advanced superconducting optical detectors

David Pérez de Lara, Mikkel Ejrnaes, S. Pagano, Mikhail Lisitskiy, E. Esposito, Ciro Nappi, Roberto Cristiano

Published Jun 1, 2006• 0 citations
Publisher

Abstract

We have investigated advanced superconducting optical and infrared detectors for their integration with superconductive active circuits. The detectors are based on ultra-thin NbN striplines. NbN is the material of choice for single photon optical and infrared detectors, as already demonstrated in the literature. The detectors so far proposed are based on conceptually simple, although difficult to realize, sub-micrometric meander type structures. Most applications of such detectors require some treatment of the signal generated, either as pulse shaping or signal amplification, to fully exploit the detection capabilities, such as sub-ns response time and proportional response. We have developed a room temperature process that, while preserving reasonable superconducting properties of NbN, allows a simple integration of the detectors in Nb-based circuits. Moreover we have developed a passivation technique, by using a protective AlN layer on top of the NbN one. The developed technology allows complex detector configurations, such as integrated RSFQ circuits or SQUID readout, to be relatively easily realized. The response of our NbN strip to photon irradiation will be presented.

DOI
10.1088/1742-6596/43/1/327

Related papers

Fabrication of High-Speed Single Photon Detectors in NbN for Quantum Information Processing

J-C Villégier, Bertrand Delaet, P. Feautrier +3 more

Abstract. We describe the collective fabrication and characterization of superconducting single photon detectors (SSPD) made of a superconducting NbN meander, suitable for near-infrared applications. The NbN layer acting as the photon absorber is deposited epitaxially on a three inch diameter R-plane Sapphire heated substrate by DC-Magnetron sputtering from a Nb target in a reactive mixture of nitrogen and argon gas. Very thin NbN (~4 nm) films superconducting up to 12 K with a rather large critical current density are in-situ covered by a 1.4 nm thick room temperature sputtered AlN layer protecting NbN from oxidation. Two reliable patterning processes has been developed successfully, one based on electron beam lithography, the second based on selective NbN film anodization under an AFM tip. The filling factor obtained with 150 nm wide stripes in the meander pixel is about 0.5 with e-beam lithography and improved up to 0.8 with AFM patterning. In order to achieve an improved optical coupling of the SSPD by using wafers integrating ion implanted IR waveguides, growth studies of NbN layers have been focused on R-plane Sapphire and silicon substrates. We present optical and superconducting properties of NbN layers by FTIR, ellipsometry and STM.

Journal of Physics Conference Series•Jun 1, 2006•5 citations

Superconducting single-photon detectors based on ultrathin NbTiN films

Stephan Steinhauer, Samuel Gyger, Bruno Lopez-Rodriguez +5 more

Superconducting single-photon detectors (SSPDs) have developed into a mature device technology and excel due outstanding performance metrics, in particular high detection efficiency combined with high time resolution and low dark count rate for a wide wavelength range from the visible to the mid-infrared. In addition to commercially available systems with devices coupled to optical fibers, SSPDs can be integrated with photonic circuits using scalable nanofabrication technologies. Here, we will present recent progress on SSPDs based on NbTiN thin films and their integration on different photonic material platforms. Our process for NbTiN growth at room temperature will be described, using magnetron reactive co-sputtering to achieve high-quality superconducting layers down to thicknesses of few nanometres. Optimized SSPD devices are realized by tuning the superconducting properties of NbTiN thin films, adjusting the material composition and nanocrystalline structure. The realization of different types of detectors and geometries will be shown, including nanofabrication techniques for achieving fully suspended nanowire structures. Furthermore, we will discuss challenges and prospects for scaling-up SSPD device technology as well as detector systems. Multiplexing schemes such as dispersion engineering of superconducting transmission lines will be highlighted as powerful approach to address multiple detectors and reduce the number of required feedthroughs and electrical lines in the cryostat. Eventually, exemplary applications of SSPDs for photon counting in quantum optics and light detection and ranging (LIDAR) will be outlined.

Quantum Optics and Photon Counting•Apr 14, 2021•0 citations

Superconducting nanostructures for counting of single photons in the infrared range

Чулкова Галина Меркурьевна, I. Milostnaya, Alexander A. Korneev +11 more

We present our studies on ultrafast superconducting single-photon detectors (SSPDs) based on ultrathin NbN nanostructures. Our SSPDs are patterned by electron beam lithography from 4-nm thick NbN film into meander-shaped strips covering square area of 10/spl times/10 /spl mu/m/sup 2/. The advances in the fabrication technology allowed us to produce highly uniform 100-120-nm-wide strips with meander filling factor close to 0.6. The detectors exploit a combined detection mechanism, where upon a single-photon absorption, an avalanche of excited hot electrons and the biasing supercurrent, jointly produce a picosecond voltage transient response across the superconducting nanostrip. The SSPDs are typically operated at 4.2 K, but they have shown that their sensitivity in the infrared radiation range can be significantly improved by lowering the operating temperature from 4.2 K to 2 K. When operated at 2 K, the SSPD quantum efficiency (QE) for visible light photons reaches 30-40%, which is the saturation value limited by optical absorption of our 4-nm-thick NbN film. For 1.55 /spl mu/m photons, QE was /spl sim/20% and decreases exponentially with the increase of the optical wavelength, but even at the wavelength of 6 /spl mu/m the detector remains sensitive to single photons and exhibits QE of about 10/sup -2/%. The dark (false) count rate at 2 K is as low as 2 /spl times/ 10/sup -4/ s/sup -1/, what makes our detector essentially a background-limited sensor. The very low dark-count rate results in the noise equivalent power (NEP) as low as 10/sup -18/ WHz/sup -1/2/ for the mid-infrared range (6 /spl mu/m). Further improvement of the SSPD performance in the mid-infrared range can be obtained by substituting NbN for the other, lower-T/sub c/ superconductors with the narrow superconducting gap and low quasiparticle diffusivity. The use of such materials will shift the cutoff wavelength towards the values even longer than 6 /spl mu/m.

CAOL . International Conference on Advanced Optoelectronics and Lasers•Jan 5, 2006•3 citations

Superconducting NbN microstrip single-photon detectors

Alexander A. Korneev

Superconducting Single-Photon Detectors (SSPD) invented two decades ago have evolved to a mature technology and have become devices of choice in the advanced applications of quantum optics, such as quantum cryptography and optical quantum computing. In these applications SSPDs are coupled to single-mode fibers and feature almost unity detection efficiency, negligible dark counts, picosecond timing jitter and MHz photon count rate. Meanwhile, there are great many applications requiring coupling to multi-mode fibers or free space. `Classical’ SSPDs with 100-nm-wide superconducting strip and covering area of about 100 µm2 are not suitable for further scaling due to degradation of performance and low fabrication yield. Recently we have demonstrated single-photon counting in micron-wide superconducting bridges and strips. Here we present our approach to the realization of practical photon-counting detectors of large enough area to be efficiently coupled to multi-mode fibers or free space. The detector is either a meander or a spiral of 1-µm-wide strip covering an area of 50x50 µm2. Being operated at 1.7K temperature it demonstrates the saturated detection efficiency (i.e. limited by the absorption in the detector) up to 1550 nm wavelength, about 10 ns dead time and timing jitter in range 50-100 ps.

Quantum Optics and Photon Counting•Apr 19, 2021•0 citations

Superconducting nanostructured detectors capable of single photon counting of mid-infrared optical radiation

I. Milostnaya, Alexander A. Korneev, Olga V. Minaeva +13 more

We report on our progress in research and development of ultrafast superconducting single-photon detectors (SSPDs) based on ultrathin NbN nanostructures. Our SSPDs were made of the 4-nm-thick NbN films with Tc ~11 K, patterned as meander-shaped, 100-nm-wide strips, and covering an area of 10×10 μm2. The detectors exploit a combined detection mechanism, where upon a single-photon absorption, a hotspot of excited electrons and redistribution of the biasing supercurrent, jointly produce a picosecond voltage transient signal across the superconducting nanostripe. The SSPDs are typically operated at 4.2 K, but their sensitivity in the infrared radiation range can be significantly improved by lowering the operating temperature from 4.2 K to 2 K. When operated at 2 K, the SSPD quantum efficiency (QE) for visible light photons reaches 30-40%, which is the saturation value limited by the optical absorption of our 4-nm-thick NbN film. With the wavelength increase of the incident photons,the QE of SSPDs decreases significantly, but even at the wavelength of 6 μm, the detector is able to count single photons and exhibits QE of about 10-2 %. The dark (false) count rate at 2 K is as low as 2x10-4 s,-1 which makes our detector essentially a background-limited sensor. The very low dark-count rate results in a noise equivalent power (NEP) below 10-18 WHz-1/2 for the mid-infrared range (6 μm). Further improvement of the SSPD performance in the mid-infrared range can be obtained by substituting NbN for another, lower-Tc materials with a narrow superconducting gap and low quasiparticles diffusivity. The use of such superconductors should shift the cutoff wavelength below 10 μm.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Sep 16, 2005•2 citations

Experimental characterization of NbN nanowire optical detectors with parallel stripline configuration

A. Casaburi, Mikkel Ejrnaes, Orlando Quaranta +10 more

We have developed a novel geometrical configuration for NbN-based superconducting single photon optical detector (SSPD) that achieves two goals: a much lower intrinsic impedance, and a consequently greater bandwidth, and a much larger signal amplitude compared to the standard meandered configuration. This has been obtained by implementing a properly designed parallel stripline structure where a cascade switching mechanism occurs when one of the striplines is hit by an optical photon. The overall switching occurs synchronously and in a very short time, giving rise to a strong and fast voltage pulse. The SSPD have been realized using state of the art NbN deposition technology and e-beam lithography. The strips are 100 nm wide and 5 μm long and have been realized with 4 nm NbN film on sapphire and Si substrate. We report on experimental characterization of such novel devices. The performances of the proposed novel type of SSPD are compared with standard SSPD design and results in terms of signal amplitude, risetime and effective detection area.

Journal of Physics Conference Series•Feb 1, 2008•1 citation
We have investigated advanced superconducting optical and infrared detectors for their integration with superconductive active circuits. The detectors are based on ultra-thin NbN striplines. NbN is the material of choice for single photon optical and infrared detectors, as already demonstrated in the literature. The detectors so far proposed are based on conceptually simple, although difficult to realize, sub-micrometric meander type structures. Most applications of such detectors require some treatment of the signal generated, either as pulse shaping or signal amplification, to fully exploit the detection capabilities, such as sub-ns response time and proportional response. We have developed a room temperature process that, while preserving reasonable superconducting properties of NbN, allows a simple integration of the detectors in Nb-based circuits. Moreover we have developed a passivation technique, by using a protective AlN layer on top of the NbN one. The developed technology allows complex detector configurations, such as integrated RSFQ circuits or SQUID readout, to be relatively easily realized. The response of our NbN strip to photon irradiation will be presented.
Abstract. We describe the collective fabrication and characterization of superconducting single photon detectors (SSPD) made of a superconducting NbN meander, suitable for near-infrared applications. The NbN layer acting as the photon absorber is deposited epitaxially on a three inch diameter R-plane Sapphire heated substrate by DC-Magnetron sputtering from a Nb target in a reactive mixture of nitrogen and argon gas. Very thin NbN (~4 nm) films superconducting up to 12 K with a rather large critical current density are in-situ covered by a 1.4 nm thick room temperature sputtered AlN layer protecting NbN from oxidation. Two reliable patterning processes has been developed successfully, one based on electron beam lithography, the second based on selective NbN film anodization under an AFM tip. The filling factor obtained with 150 nm wide stripes in the meander pixel is about 0.5 with e-beam lithography and improved up to 0.8 with AFM patterning. In order to achieve an improved optical coupling of the SSPD by using wafers integrating ion implanted IR waveguides, growth studies of NbN layers have been focused on R-plane Sapphire and silicon substrates. We present optical and superconducting properties of NbN layers by FTIR, ellipsometry and STM.
Superconducting single-photon detectors (SSPDs) have developed into a mature device technology and excel due outstanding performance metrics, in particular high detection efficiency combined with high time resolution and low dark count rate for a wide wavelength range from the visible to the mid-infrared. In addition to commercially available systems with devices coupled to optical fibers, SSPDs can be integrated with photonic circuits using scalable nanofabrication technologies. Here, we will present recent progress on SSPDs based on NbTiN thin films and their integration on different photonic material platforms. Our process for NbTiN growth at room temperature will be described, using magnetron reactive co-sputtering to achieve high-quality superconducting layers down to thicknesses of few nanometres. Optimized SSPD devices are realized by tuning the superconducting properties of NbTiN thin films, adjusting the material composition and nanocrystalline structure. The realization of different types of detectors and geometries will be shown, including nanofabrication techniques for achieving fully suspended nanowire structures. Furthermore, we will discuss challenges and prospects for scaling-up SSPD device technology as well as detector systems. Multiplexing schemes such as dispersion engineering of superconducting transmission lines will be highlighted as powerful approach to address multiple detectors and reduce the number of required feedthroughs and electrical lines in the cryostat. Eventually, exemplary applications of SSPDs for photon counting in quantum optics and light detection and ranging (LIDAR) will be outlined.
We present our studies on ultrafast superconducting single-photon detectors (SSPDs) based on ultrathin NbN nanostructures. Our SSPDs are patterned by electron beam lithography from 4-nm thick NbN film into meander-shaped strips covering square area of 10/spl times/10 /spl mu/m/sup 2/. The advances in the fabrication technology allowed us to produce highly uniform 100-120-nm-wide strips with meander filling factor close to 0.6. The detectors exploit a combined detection mechanism, where upon a single-photon absorption, an avalanche of excited hot electrons and the biasing supercurrent, jointly produce a picosecond voltage transient response across the superconducting nanostrip. The SSPDs are typically operated at 4.2 K, but they have shown that their sensitivity in the infrared radiation range can be significantly improved by lowering the operating temperature from 4.2 K to 2 K. When operated at 2 K, the SSPD quantum efficiency (QE) for visible light photons reaches 30-40%, which is the saturation value limited by optical absorption of our 4-nm-thick NbN film. For 1.55 /spl mu/m photons, QE was /spl sim/20% and decreases exponentially with the increase of the optical wavelength, but even at the wavelength of 6 /spl mu/m the detector remains sensitive to single photons and exhibits QE of about 10/sup -2/%. The dark (false) count rate at 2 K is as low as 2 /spl times/ 10/sup -4/ s/sup -1/, what makes our detector essentially a background-limited sensor. The very low dark-count rate results in the noise equivalent power (NEP) as low as 10/sup -18/ WHz/sup -1/2/ for the mid-infrared range (6 /spl mu/m). Further improvement of the SSPD performance in the mid-infrared range can be obtained by substituting NbN for the other, lower-T/sub c/ superconductors with the narrow superconducting gap and low quasiparticle diffusivity. The use of such materials will shift the cutoff wavelength towards the values even longer than 6 /spl mu/m.
Superconducting Single-Photon Detectors (SSPD) invented two decades ago have evolved to a mature technology and have become devices of choice in the advanced applications of quantum optics, such as quantum cryptography and optical quantum computing. In these applications SSPDs are coupled to single-mode fibers and feature almost unity detection efficiency, negligible dark counts, picosecond timing jitter and MHz photon count rate. Meanwhile, there are great many applications requiring coupling to multi-mode fibers or free space. `Classical’ SSPDs with 100-nm-wide superconducting strip and covering area of about 100 µm2 are not suitable for further scaling due to degradation of performance and low fabrication yield. Recently we have demonstrated single-photon counting in micron-wide superconducting bridges and strips. Here we present our approach to the realization of practical photon-counting detectors of large enough area to be efficiently coupled to multi-mode fibers or free space. The detector is either a meander or a spiral of 1-µm-wide strip covering an area of 50x50 µm2. Being operated at 1.7K temperature it demonstrates the saturated detection efficiency (i.e. limited by the absorption in the detector) up to 1550 nm wavelength, about 10 ns dead time and timing jitter in range 50-100 ps.
We report on our progress in research and development of ultrafast superconducting single-photon detectors (SSPDs) based on ultrathin NbN nanostructures. Our SSPDs were made of the 4-nm-thick NbN films with Tc ~11 K, patterned as meander-shaped, 100-nm-wide strips, and covering an area of 10×10 μm2. The detectors exploit a combined detection mechanism, where upon a single-photon absorption, a hotspot of excited electrons and redistribution of the biasing supercurrent, jointly produce a picosecond voltage transient signal across the superconducting nanostripe. The SSPDs are typically operated at 4.2 K, but their sensitivity in the infrared radiation range can be significantly improved by lowering the operating temperature from 4.2 K to 2 K. When operated at 2 K, the SSPD quantum efficiency (QE) for visible light photons reaches 30-40%, which is the saturation value limited by the optical absorption of our 4-nm-thick NbN film. With the wavelength increase of the incident photons,the QE of SSPDs decreases significantly, but even at the wavelength of 6 μm, the detector is able to count single photons and exhibits QE of about 10-2 %. The dark (false) count rate at 2 K is as low as 2x10-4 s,-1 which makes our detector essentially a background-limited sensor. The very low dark-count rate results in a noise equivalent power (NEP) below 10-18 WHz-1/2 for the mid-infrared range (6 μm). Further improvement of the SSPD performance in the mid-infrared range can be obtained by substituting NbN for another, lower-Tc materials with a narrow superconducting gap and low quasiparticles diffusivity. The use of such superconductors should shift the cutoff wavelength below 10 μm.
We have developed a novel geometrical configuration for NbN-based superconducting single photon optical detector (SSPD) that achieves two goals: a much lower intrinsic impedance, and a consequently greater bandwidth, and a much larger signal amplitude compared to the standard meandered configuration. This has been obtained by implementing a properly designed parallel stripline structure where a cascade switching mechanism occurs when one of the striplines is hit by an optical photon. The overall switching occurs synchronously and in a very short time, giving rise to a strong and fast voltage pulse. The SSPD have been realized using state of the art NbN deposition technology and e-beam lithography. The strips are 100 nm wide and 5 μm long and have been realized with 4 nm NbN film on sapphire and Si substrate. We report on experimental characterization of such novel devices. The performances of the proposed novel type of SSPD are compared with standard SSPD design and results in terms of signal amplitude, risetime and effective detection area.