Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE/LEOS Summer Topical Meetings

Optical and near-infrared Photon detection with Superconducting Transition-Edge Sensors

Sae Woo Nam, Adriana E. Lita, Danna Rosenberg, Aaron Miller

Published Sep 22, 2006• 3 citations
Publisher

Abstract

There is increasing interest in using high-performance cryogenic optical photon detectors in a variety of applications in quantum information science and technology. These applications require detectors that have extremely low dark count rates, high photon count rates, high quantum efficiency, and moderate energy resolution or photon number resolution for near-infrared and optical photons. In this paper, we describe the operation, fabrication, and performance of superconducting transition-edge sensors designed for quantum optics and information applications.

DOI
10.1109/leosst.2006.1694046

Related papers

Optical and near-infrared Photon detection with Superconducting Transition-Edge Sensors

Sae Woo Nam, Adriana E. Lita, Danna Rosenberg +1 more

There is increasing interest in using high-performance cryogenic optical photon detectors in a variety of applications in quantum information science and technology. These applications require detectors that have extremely low dark count rates, high photon count rates, high quantum efficiency, and moderate energy resolution or photon number resolution for near-infrared and optical photons. In this paper, we describe the operation, fabrication, and performance of superconducting transition-edge sensors designed for quantum optics and information applications.

IEEE Lasers and Electro-Optics Society Annual Meeting (LEOS)•Jul 17, 2006•0 citations

Single photon detectors using superconductors for quantum information and communications

Sae Woo Nam

Because of the possibility of high efficiency and high rate detection of single photons with low dark counts, there is increasing interest in using superconducting optical photon detectors in a variety of applications in quantum information science and technology. I will describe our work on two types of superconducting detectors, the Superconducting Single Photon Detector (SSPD) and superconducting Transition-Edge Sensor (TES).

Frontiers in Optics•Jan 1, 2008•0 citations

Review on superconducting transition edge sensor based single photon detector

Qingya Zhang, Dong Wen-Hui, He Gen-Fang +3 more

Over the past decade, there have been increasing demand on and interest in high performance single photon detectors in many new applications in quantum information technology. Compared with conventional single photon detectors, superconducting transition edge sensor (TES) based single photon detectors have great advantages in the performance of detection efficiency, energy resolution, photon number resolving capability, dark count rate, etc. They have been successfully used in quantum optics experiments and quantum key distribution systems, and they will play a more important role in the research field of quantum information science and technology. In this paper we review the operating principle, fabrication process, performance, measurement system and the research progress on superconducting TES based single photon detectors.

Acta Physica Sinica•Jan 1, 2014•9 citations

Counting near-infrared single-photons with 95% efficiency

Adriana E. Lita, Aaron Miller, Sae Woo Nam

Single-photon detectors operating at visible and near-infrared wavelengths with high detection efficiency and low noise are a requirement for many quantum-information applications. Superconducting transition-edge sensors (TESs) are capable of detecting visible and near-infrared light at the single-photon level and are capable of discriminating between one- and two-photon absorption events; however these capabilities place stringent design requirements on the TES heat capacity, thermometry, and optical detection efficiency. We describe the fabrication and evaluation of a fiber-coupled, photon-number-resolving TES detector optimized for absorption at 1550 and 1310 nm wavelengths. The measured system detection efficiency at 1556 nm is 95 % +/- 2 %, which to our knowledge is the highest system detection efficiency reported for a near-infrared single-photon detector.

Optics Express•Jan 1, 2008•733 citations

Superconducting transition-edge sensors optimized for high-efficiency photon-number resolving detectors

Adriana E. Lita, Brice Calkins, Lenson A. Pellouchoud +2 more

Superconducting photon detectors have emerged as a powerful new option for detecting single photons. System detection efficiency that incorporates the quantum efficiency of the device and system losses is one of the most important single-photon detector performance metrics for quantum information applications. Superconducting transition-edge sensors (TESs) are microcalorimeters that have the ability of distinguishing single photons with negligible dark counts. In addition, TESs are capable of directly measuring the photon number in a pulse of light. We have achieved near-unity system detection efficiency with TESs at particular wavelengths in the near-infrared by using multilayer structures that enhance the absorption of light into the active device material. We describe the design of the multilayer structure enabling high detection efficiency TESs including issues and requirements for obtaining detection efficiency values higher than 99 %. We describe the device fabrication and finally, show recent results of devices optimized for high detection efficiency using the multilayer structure.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Apr 20, 2010•51 citations

Superconducting single photon detectors

Sae Woo Nam, Brice Calkins, T. Gerritts +9 more

There is increasing interest in using superconducting optical photon detectors in a variety of applications. These applications require detectors that have extremely low dark count rates, high count rates, and high quantum efficiency. I will describe our work on two types of superconducting detectors, the Superconducting Nanowire Single Photon Detector (SNSPD or nSSPD) and superconducting Transition-Edge Sensor (TES). An SNSPD is an ultra-thin, ultra-narrow (nm scale) superconducting meander that is current biased just below its critical current density. When one or more photon is absorbed, a hot spot is formed that causes the superconductor to develop a resistance and consequently a voltage pulse. At NIST and JPL, we have been developing nanowire detectors using an amorphous alloy of tungsten-silicide. An example of this detector is shown in Fig 1(a). In this case, there are two tungsten silicide layers separated by a dielectric layer to optimize detection of light for any polarization[1]. Fig 1(b) is an example of a TES detector with gold cooling fins to enhance timing of the detector[2]. By exploiting the sharp superconducting-to-normal resistive transition of tungsten at 100mK, TES detectors give an output signal that is proportional to the cumulative energy in an absorption event. This proportional pulse-height enables the determination of the energy absorbed by the TES and the direct conversion of sensor pulse-height into photon number. I will discuss our progress towards developing both types of detectors with quantum efficiencies approaching 100%.

Conference on Lasers and Electro-Optics Europe & European Quantum Electronics Conference (CLEO/Europe-EQEC)•May 1, 2013•0 citations
There is increasing interest in using high-performance cryogenic optical photon detectors in a variety of applications in quantum information science and technology. These applications require detectors that have extremely low dark count rates, high photon count rates, high quantum efficiency, and moderate energy resolution or photon number resolution for near-infrared and optical photons. In this paper, we describe the operation, fabrication, and performance of superconducting transition-edge sensors designed for quantum optics and information applications.
There is increasing interest in using high-performance cryogenic optical photon detectors in a variety of applications in quantum information science and technology. These applications require detectors that have extremely low dark count rates, high photon count rates, high quantum efficiency, and moderate energy resolution or photon number resolution for near-infrared and optical photons. In this paper, we describe the operation, fabrication, and performance of superconducting transition-edge sensors designed for quantum optics and information applications.
Over the past decade, there have been increasing demand on and interest in high performance single photon detectors in many new applications in quantum information technology. Compared with conventional single photon detectors, superconducting transition edge sensor (TES) based single photon detectors have great advantages in the performance of detection efficiency, energy resolution, photon number resolving capability, dark count rate, etc. They have been successfully used in quantum optics experiments and quantum key distribution systems, and they will play a more important role in the research field of quantum information science and technology. In this paper we review the operating principle, fabrication process, performance, measurement system and the research progress on superconducting TES based single photon detectors.
Single-photon detectors operating at visible and near-infrared wavelengths with high detection efficiency and low noise are a requirement for many quantum-information applications. Superconducting transition-edge sensors (TESs) are capable of detecting visible and near-infrared light at the single-photon level and are capable of discriminating between one- and two-photon absorption events; however these capabilities place stringent design requirements on the TES heat capacity, thermometry, and optical detection efficiency. We describe the fabrication and evaluation of a fiber-coupled, photon-number-resolving TES detector optimized for absorption at 1550 and 1310 nm wavelengths. The measured system detection efficiency at 1556 nm is 95 % +/- 2 %, which to our knowledge is the highest system detection efficiency reported for a near-infrared single-photon detector.
Superconducting photon detectors have emerged as a powerful new option for detecting single photons. System detection efficiency that incorporates the quantum efficiency of the device and system losses is one of the most important single-photon detector performance metrics for quantum information applications. Superconducting transition-edge sensors (TESs) are microcalorimeters that have the ability of distinguishing single photons with negligible dark counts. In addition, TESs are capable of directly measuring the photon number in a pulse of light. We have achieved near-unity system detection efficiency with TESs at particular wavelengths in the near-infrared by using multilayer structures that enhance the absorption of light into the active device material. We describe the design of the multilayer structure enabling high detection efficiency TESs including issues and requirements for obtaining detection efficiency values higher than 99 %. We describe the device fabrication and finally, show recent results of devices optimized for high detection efficiency using the multilayer structure.
There is increasing interest in using superconducting optical photon detectors in a variety of applications. These applications require detectors that have extremely low dark count rates, high count rates, and high quantum efficiency. I will describe our work on two types of superconducting detectors, the Superconducting Nanowire Single Photon Detector (SNSPD or nSSPD) and superconducting Transition-Edge Sensor (TES). An SNSPD is an ultra-thin, ultra-narrow (nm scale) superconducting meander that is current biased just below its critical current density. When one or more photon is absorbed, a hot spot is formed that causes the superconductor to develop a resistance and consequently a voltage pulse. At NIST and JPL, we have been developing nanowire detectors using an amorphous alloy of tungsten-silicide. An example of this detector is shown in Fig 1(a). In this case, there are two tungsten silicide layers separated by a dielectric layer to optimize detection of light for any polarization[1]. Fig 1(b) is an example of a TES detector with gold cooling fins to enhance timing of the detector[2]. By exploiting the sharp superconducting-to-normal resistive transition of tungsten at 100mK, TES detectors give an output signal that is proportional to the cumulative energy in an absorption event. This proportional pulse-height enables the determination of the energy absorbed by the TES and the direct conversion of sensor pulse-height into photon number. I will discuss our progress towards developing both types of detectors with quantum efficiencies approaching 100%.