When built, quantum repeater networks will require classical network protocols to control the quantum operations. However, existing work on repeaters has focused on the quantum operations themselves, with less attention paid to the contents, semantics, ordering and reliability of the classical control messages. In this paper we define and describe our implementation of the classical control protocols. The state machines and packet sequences for the three protocol layers are presented, and operation confirmed by running the protocols over simulations of the physical network. We also show that proper management of the resources in a bottleneck link allows the aggregate throughput of two end-to-end flows to substantially exceed that of a single flow. Our layered architectural framework will support independent evolution of the separate protocol layers.
When built, quantum repeater networks will require classical network protocols to control the quantum operations. However, existing work on repeaters has focused on the quantum operations themselves, with less attention paid to the contents, semantics, ordering and reliability of the classical control messages. In this paper we define and describe our implementation of the classical control protocols. The state machines and packet sequences for the three protocol layers are presented, and operation confirmed by running the protocols over simulations of the physical network. We also show that proper management of the resources in a bottleneck link allows the aggregate throughput of two end-to-end flows to substantially exceed that of a single flow. Our layered architectural framework will support independent evolution of the separate protocol layers.
When built, quantum repeater networks will require classical network protocols to control the quantum operations. However, existing work on repeaters has focused on the quantum operations themselves, with less attention paid to the contents, semantics, ordering and reliability of the classical control messages. In this work we define and describe our implementation of the classical control protocols. The state machines and packet sequences for the three protocol layers are presented, and operation confirmed by running the protocols over simulations of the physical network. We also show that proper management of the resources in a bottleneck link allows the aggregate throughput of two end-to-end flows to substantially exceed that of a single flow. Our layered architectural framework will support independent evolution of the separate protocol layers. Networks of quantum repeaters utilize three concepts to execute a distributed algorithm that creates entangled quantum states between nodes that are far apart: a basic entanglement mechanism which depends on the physical implementation, error management (in this work, we study a method known as purification), and finally a quantum state propagation layer (here we implement entanglement swapping, which builds multi-hop connections from single-hop connections). Some researchers are investigating approaches that are substantially different from entanglement swapping [30, 24, 19]. Here we focus on swapping, but the layered architecture approach is broadly applicable, allowing other implementations to replace only a single layer in the protocol stack. Previous work primarily focused on the physical and mathematical tools for building repeaters. Classical information is also needed to enable teleportation and swapping, as many quantum operations are not deterministic, and results of quantum measurements need to be reported to distant partners before further operations can proceed. Also, operations in the middle of the network must be coordinated to route and swap properly. This requires classical messages to make operations robust, but message propagation times penalize performance. Even though this delay is usually included in repeater simulations, prior work has not defined the protocols in detail, especially with respect to how all of the nodes make consistent decisions in a timely fashion. In this work, we introduce a protocol stack for networks of quantum repeaters that considers all the necessary classical messages and which can be easily adapted for different approaches at all three protocol layers. We run simulations of competing flows on a dumbbell topology in order to increase our confidence in the behavior of our network protocols. By adjusting the fidelity thresholds required for entanglement swapping, we show that some configurations boost the aggregate throughput for multiple flows significantly above the maximum for a single flow, taking advantage of resources that would otherwise sit idle. The operation of such complex networks and such delicate tuning of the system without formal protocol definitions would not be possible. Previous work has also concentrated almost exclusively on the dedicated use of a single line or chain of repeaters, delivering Bell pairs only to the two nodes at the ends of the chain. Networks, however, typically have more than two end points, and allow any pair of these end nodes to communicate. More topologically complex networks, with numerous end nodes, are obviously much more scalable than connecting every possible pair of nodes using a dedicated line of repeaters. we investigate how classical multiplexing schemes translate to the domain of quantum repeaters, in order to manage shared resources and active communication flows of data from different stations. We simulate four sharing protocols in a complex network with competing traffic. Circuit switching gives any individual flow the best performance, but makes poor use of the overall network and is inflexible. We use circuit switching as our baseline case to compare time division multiplexing, buffer space multiplexing, and statistical multiplexing, and show that all multiplexing schemes are better than circuit switching. For the particular network simulated, we find that statistical multiplexing outperforms time division multiplexing by 28% and buffer space multiplexing by 13%. We find that all three multiplexing schemes are fair; each flow is penalized a similar percentage of its throughput as the the total number of users in the network increases. Finally, statistical multiplexing requires no network-wide coordination of the use of quantum memory or channels, and is easier to implement than a robust, scalable scheme for the other protocols. Our current results suggest that the best strategy for quantum repeater networks is statistical multiplexing. (This is in fact the quantum analogue of the basis on which the Internet works.) However, our current simulations are done with no degradation of memory over time, using the assumption of quantum error-corrected memory at each repeater; inclusion of decoherence and a finite qubit lifetime remains as future work.
The quantum internet enables distribution of quantum states across distant nodes, supporting secure communication, distributed computing, and quantum sensing. Unlike classical networks, it is constrained by the no cloning theorem, probabilistic entanglement generation, decoherence, and hardware drift, making classical abstractions inadequate. Scalable quantum networking therefore requires new architectures, protocols, and optimisation methods that explicitly account for these limitations.
This thesis studies the architecture, routing, and operation of quantum networks under realistic constraints, focusing on bipartite entanglement distribution over quantum repeater networks. Key metrics include end to end fidelity, throughput, scalability, and fairness. At the network layer, routing strategies are developed beyond assumptions of homogeneous nodes and full network knowledge. Routing under heterogeneous repeater efficiencies shows how partial knowledge of node quality improves fidelity and reduces path blocking. A grey box routing approach is then introduced, where path selection relies only on topology and end to end estimates, achieving robustness and fairness without detailed link information.
At the link layer, calibration and hardware drift are addressed through a calibration aware model separating activation and calibration phases. For linear repeater chains, an optimal calibration schedule is derived to balance operation time and calibration overhead. This is extended to general topologies with shared links, where a greedy orchestration heuristic is proposed.
Finally, the thesis connects network protocols with hardware via an instruction set architecture for programmable quantum repeater nodes based on NV centers, enabling coherent programmability and linking physical operations to higher layer protocols.
Quantum communication brings radically new capabilities that are provably impossible to attain in any classical network. Here, we take the first step from a physics experiment to a fully fledged quantum internet system. We propose a functional allocation of a quantum network stack and construct the first physical and link layer protocols that turn ad-hoc physics experiments producing heralded entanglement between quantum processors into a well-defined and robust service. This lays the groundwork for designing and implementing scalable control and application protocols in platform-independent software. To design our protocol, we identify use cases, as well as fundamental and technological design considerations of quantum network hardware, illustrated by considering the state-of-the-art quantum processor platform available to us (Nitrogen-Vacancy (NV) centers in diamond). sing a purpose built discrete-event simulator for quantum networks, we examine the robustness and performance of our protocol using extensive simulations on a supercomputing cluster. We perform a full implementation of our protocol, where we successfully validate the physical simulation model against data gathered from the NV hardware. We first observe that our protocol is robust even in a regime of exaggerated losses of classical control messages with only little impact on the performance of the system. We proceed to study the performance of our protocols for 169 distinct simulation scenarios, including tradeoffs between traditional performance metrics such as throughput and the quality of entanglement. Finally, we initiate the study of quantum network scheduling strategies to optimize protocol performance for different use cases.
Quantum communication brings radically new capabilities that are provably impossible to attain in any classical network. Here, we take the first step from a physics experiment to a quantum internet system. We propose a functional allocation of a quantum network stack, and construct the first physical and link layer protocols that turn ad-hoc physics experiments producing heralded entanglement between quantum processors into a well-defined and robust service. This lays the groundwork for designing and implementing scalable control and application protocols in platform-independent software. To design our protocol, we identify use cases, as well as fundamental and technological design considerations of quantum network hardware, illustrated by considering the state-of-the-art quantum processor platform available to us (Nitrogen-Vacancy (NV) centers in diamond). Using a purpose built discrete-event simulator for quantum networks, we examine the robustness and performance of our protocol using extensive simulations on a supercomputing cluster. We perform a full implementation of our protocol in our simulator, where we successfully validate the physical simulation model against data gathered from the NV hardware. We first observe that our protocol is robust even in a regime of exaggerated losses of classical control messages with only little impact on the performance of the system. We proceed to study the performance of our protocols for 169 distinct simulation scenarios, including trade-offs between traditional performance metrics such as throughput, and the quality of entanglement. Finally, we initiate the study of quantum network scheduling strategies to optimize protocol performance for different use cases.
Quantum networks generate distributed entangled state or relocate quantum state, uniquely ensuring eavesdropper detection or reaching agreement more quickly than their classical counterparts. These capabilities rely on the composition of link and multihop mechanisms into a coherent system, with particular attention to managing errors in and loss of delicate quantum states. This article explores quantum networking in terms of fundamental network architecture principles, and explains where and how it diverges from its classical counterparts. It discusses engineering principles that ensure robust and interoperable communication by introducing new protocol layers to support quantum sessions, and considers how these layers interact with quantum link mechanisms to support user-level quantum-enabled applications.
In this thesis, I explore whether it is possible to build a unified Quantum Internet architecture that supports different types of quantum repeaters -- especially the two most distinct and seemingly incompatible ones: memory-based quantum repeaters and all-photonic, memoryless repeaters. These technologies have traditionally been developed with the aim of becoming the single dominant solution, but I ask: Can they work together in the same network? What kind of architecture would support both? And how can simulation help us understand what is needed to manage such a network at scale? To address these questions, I propose an architecture based on an existing recursive network design and programmable RuleSet-based protocols that can coordinate diverse hardware components. I introduce a new emitter-photon building block to bridge memory-based and all-photonic segments, and show how classical networking abstractions can be extended to manage quantum operations. While I have developed a simulation tool grounded in these architectural principles and validated it against existing simulators and analytical models, a full-scale investigation of the resource trade-offs and performance implications remains future work. Nevertheless, the results so far suggest that a unified, heterogeneous quantum network is not only possible but increasingly practical with current technologies -- though ongoing experimental progress will be essential to fully realize this vision.