The quantum internet enables distribution of quantum states across distant nodes, supporting secure communication, distributed computing, and quantum sensing. Unlike classical networks, it is constrained by the no cloning theorem, probabilistic entanglement generation, decoherence, and hardware drift, making classical abstractions inadequate. Scalable quantum networking therefore requires new architectures, protocols, and optimisation methods that explicitly account for these limitations.
This thesis studies the architecture, routing, and operation of quantum networks under realistic constraints, focusing on bipartite entanglement distribution over quantum repeater networks. Key metrics include end to end fidelity, throughput, scalability, and fairness. At the network layer, routing strategies are developed beyond assumptions of homogeneous nodes and full network knowledge. Routing under heterogeneous repeater efficiencies shows how partial knowledge of node quality improves fidelity and reduces path blocking. A grey box routing approach is then introduced, where path selection relies only on topology and end to end estimates, achieving robustness and fairness without detailed link information.
At the link layer, calibration and hardware drift are addressed through a calibration aware model separating activation and calibration phases. For linear repeater chains, an optimal calibration schedule is derived to balance operation time and calibration overhead. This is extended to general topologies with shared links, where a greedy orchestration heuristic is proposed.
Finally, the thesis connects network protocols with hardware via an instruction set architecture for programmable quantum repeater nodes based on NV centers, enabling coherent programmability and linking physical operations to higher layer protocols.
The quantum internet enables distribution of quantum states across distant nodes, supporting secure communication, distributed computing, and quantum sensing. Unlike classical networks, it is constrained by the no cloning theorem, probabilistic entanglement generation, decoherence, and hardware drift, making classical abstractions inadequate. Scalable quantum networking therefore requires new architectures, protocols, and optimisation methods that explicitly account for these limitations.
This thesis studies the architecture, routing, and operation of quantum networks under realistic constraints, focusing on bipartite entanglement distribution over quantum repeater networks. Key metrics include end to end fidelity, throughput, scalability, and fairness. At the network layer, routing strategies are developed beyond assumptions of homogeneous nodes and full network knowledge. Routing under heterogeneous repeater efficiencies shows how partial knowledge of node quality improves fidelity and reduces path blocking. A grey box routing approach is then introduced, where path selection relies only on topology and end to end estimates, achieving robustness and fairness without detailed link information.
At the link layer, calibration and hardware drift are addressed through a calibration aware model separating activation and calibration phases. For linear repeater chains, an optimal calibration schedule is derived to balance operation time and calibration overhead. This is extended to general topologies with shared links, where a greedy orchestration heuristic is proposed.
Finally, the thesis connects network protocols with hardware via an instruction set architecture for programmable quantum repeater nodes based on NV centers, enabling coherent programmability and linking physical operations to higher layer protocols.
The reliable distribution of entanglement is essential for the effective operation of quantum networks. Due to fundamental differences between quantum and classical communication systems, it is necessary to develop specialised algorithms and protocols that also account for quantum-specific constraints. In this work, we focus on the issue of recalibration. As suggested by recent experimental studies, the process of local entanglement generation in a quantum link degrades over time due to environmental changes that have to be estimated and compensated via a fixed-duration calibration operation, during which the link is not available. Therefore, in such a quantum network, every link alternates between an activation period, during which it operates normally, and a calibration period, during which it cannot participate in the end-to-end entanglement distribution, thereby creating a trade-off between link quality (the initial fidelity of generated pairs, which decays during activation) and availability (the fraction of time the link is usable, which calibration reduces). We develop analytically a protocol for optimally assigning activation periods to each link in linear quantum repeater chains, subject to any general end-to-end fidelity requirements and local initial fidelity thresholds. Building on this foundation, we extend to general quantum networks, where multiple paths may cross at common links. To this, we propose a heuristic approach, evaluate it through simulations, and compare its performance with a benchmark, a numerical approach and theoretical bounds, confirming the analytical ordering of their performance.
When built, quantum repeater networks will require classical network protocols to control the quantum operations. However, existing work on repeaters has focused on the quantum operations themselves, with less attention paid to the contents, semantics, ordering and reliability of the classical control messages. In this work we define and describe our implementation of the classical control protocols. The state machines and packet sequences for the three protocol layers are presented, and operation confirmed by running the protocols over simulations of the physical network. We also show that proper management of the resources in a bottleneck link allows the aggregate throughput of two end-to-end flows to substantially exceed that of a single flow. Our layered architectural framework will support independent evolution of the separate protocol layers. Networks of quantum repeaters utilize three concepts to execute a distributed algorithm that creates entangled quantum states between nodes that are far apart: a basic entanglement mechanism which depends on the physical implementation, error management (in this work, we study a method known as purification), and finally a quantum state propagation layer (here we implement entanglement swapping, which builds multi-hop connections from single-hop connections). Some researchers are investigating approaches that are substantially different from entanglement swapping [30, 24, 19]. Here we focus on swapping, but the layered architecture approach is broadly applicable, allowing other implementations to replace only a single layer in the protocol stack. Previous work primarily focused on the physical and mathematical tools for building repeaters. Classical information is also needed to enable teleportation and swapping, as many quantum operations are not deterministic, and results of quantum measurements need to be reported to distant partners before further operations can proceed. Also, operations in the middle of the network must be coordinated to route and swap properly. This requires classical messages to make operations robust, but message propagation times penalize performance. Even though this delay is usually included in repeater simulations, prior work has not defined the protocols in detail, especially with respect to how all of the nodes make consistent decisions in a timely fashion. In this work, we introduce a protocol stack for networks of quantum repeaters that considers all the necessary classical messages and which can be easily adapted for different approaches at all three protocol layers. We run simulations of competing flows on a dumbbell topology in order to increase our confidence in the behavior of our network protocols. By adjusting the fidelity thresholds required for entanglement swapping, we show that some configurations boost the aggregate throughput for multiple flows significantly above the maximum for a single flow, taking advantage of resources that would otherwise sit idle. The operation of such complex networks and such delicate tuning of the system without formal protocol definitions would not be possible. Previous work has also concentrated almost exclusively on the dedicated use of a single line or chain of repeaters, delivering Bell pairs only to the two nodes at the ends of the chain. Networks, however, typically have more than two end points, and allow any pair of these end nodes to communicate. More topologically complex networks, with numerous end nodes, are obviously much more scalable than connecting every possible pair of nodes using a dedicated line of repeaters. we investigate how classical multiplexing schemes translate to the domain of quantum repeaters, in order to manage shared resources and active communication flows of data from different stations. We simulate four sharing protocols in a complex network with competing traffic. Circuit switching gives any individual flow the best performance, but makes poor use of the overall network and is inflexible. We use circuit switching as our baseline case to compare time division multiplexing, buffer space multiplexing, and statistical multiplexing, and show that all multiplexing schemes are better than circuit switching. For the particular network simulated, we find that statistical multiplexing outperforms time division multiplexing by 28% and buffer space multiplexing by 13%. We find that all three multiplexing schemes are fair; each flow is penalized a similar percentage of its throughput as the the total number of users in the network increases. Finally, statistical multiplexing requires no network-wide coordination of the use of quantum memory or channels, and is easier to implement than a robust, scalable scheme for the other protocols. Our current results suggest that the best strategy for quantum repeater networks is statistical multiplexing. (This is in fact the quantum analogue of the basis on which the Internet works.) However, our current simulations are done with no degradation of memory over time, using the assumption of quantum error-corrected memory at each repeater; inclusion of decoherence and a finite qubit lifetime remains as future work.
The scalability of quantum communication networks is crucial for enabling secure information exchange and distributed quantum computing across global infrastructures. However, achieving scalability remains a significant challenge due to the effects of decoherence, photon loss, and fidelity degradation over extended distances. This paper performs a critical investigation into the scalability limits of quantum communication networks, focusing on the interplay between entanglement generation rates, end-to-end fidelity, and network parameters such as node separation, noise levels, and total distance. Leveraging the SeQUeNCe simulation framework, we model adaptable trapped-ion repeater networks to uncover fundamental insights into both homogeneous and heterogeneous configurations. Our findings reveal transformative insights that help reshape system designs for near term quantum networks. We identify maximum node separation thresholds critical for practical implementations, illuminate the non-linear degradation of fidelity with increasing distance, and expose how routing and swapping protocols influence entanglement success rates at scale. Most notably, we demonstrate that while additional repeaters can mitigate distance-induced failures, excessive node counts introduce compounding fidelity losses that threaten network viability under certain architectures. These results provide a roadmap for revolutionizing quantum networks, with actionable design strategies such as optimized node placement, advanced routing algorithms, and the adoption of cutting-edge qubit technologies like topological qubits. By addressing key bottlenecks in quantum communication scalability, our work lays the foundation for the next generation of global quantum networks.
Quantum computing promises computational capabilities beyond those of classical systems by exploiting superposition, entanglement, and quantum interference. However, the scalability of current noisy intermediate-scale quantum (NISQ) devices is limited by physical and engineering constraints, restricting the number of available qubits. Distributed quantum computing (DQC) mitigates this limitation by interconnecting multiple quantum processing units (QPUs) via quantum networks capable of distributing high-fidelity entanglement. Realizing such networks requires overcoming probabilistic entanglement generation, finite memory coherence, photon loss, and architectural constraints. This dissertation conducts an in-depth and comprehensive study of resource allocation in quantum networks, aiming to support high-throughput and high-fidelity entanglement distribution over lossy infrastructures. Our work spans the quantum networking stack, from physical-layer entanglement distribution protocols to network planning, quantum storage architectures, and distributed quantum computing. We begin by introducing two asynchronous entanglement distribution protocols-Sequential and Parallel-designed for early-stage quantum networks without global synchronization. Unlike many prior models, our protocols account for classical communication delays and quantum memory decoherence, reflecting practical constraints. Through simulations on real-world topologies such as SURFnet, we show that simple mechanisms such as cutoff-based memory management and sequential asynchronous entanglement distribution protocols can deliver competitive performance while significantly simplifying coordination, narrowing the gap between theoretical proposals and deployable protocols. Next, we formulate quantum network planning as a utility maximization problem that jointly considers entanglement distribution rate and fidelity, treating repeater and memory placement as optimization variables. We propose scalable heuristics and mixed-integer formulations, evaluating them under realistic conditions such as finite coherence time of quantum memories, limited number of memories per repeaters and end nodes, and real network topologies such as ESNet. Our findings offer practical design guidance and highlight how optimal placements depend on underlying physical constraints. To support dynamic workloads and respond to traffic bursts, we propose the Quantum Storage Network (QSN) architecture, where storage nodes buffer EPR pairs in advance of demand as an overlay network. This temporal decoupling improves responsiveness and throughput. Simulations across multiple topologies show that QSNs reduce entanglement distribution service latency by up to 40% and provide improved robustness compared to non-overlay designs, underscoring the value of storage-aware planning in future quantum networks. Finally, we focus on DQC, where large-scale quantum circuits are executed across networked QPUs. We propose a window-based circuit partitioning algorithm that minimizes nonlocal gate execution while balancing load across QPUs. Building on this partitioning, we design an adaptive, dependency-aware entanglement generation scheduler that opportunistically initiates remote entanglement as soon as dependent gates are ready, while accounting for realistic constraints such as coherence limits, probabilistic link generation, and Bell-state measurement (BSM) contention. Applied to benchmark circuits such as QAOA and QFT, this joint approach reduces execution delay by up to 35%. We further perform a two-qubit gate fidelity-sensitivity analysis under to show when the distributed quantum computing can be beneficial. Results show that the number of QPUs significantly impacts sensitivity to non-local gate fidelity: with fewer QPUs, distributed execution can outperform monolithic execution under looser fidelity constraints, whereas with more QPUs, achieving the same advantage requires substantially higher non-local gate fidelities relative to local gate fidelities. These findings identify the parameter regimes in which distributed quantum computing is beneficial, mapping break-even regions (as a function of number of QPUs) and quantifying how much cross-QPU (non-local) gate fidelity must improve—or, equivalently, how much per-QPU local gate fidelity must improve under modularization—for distributed execution to outperform a monolithic baseline. Together, these contributions form a cohesive framework for resource allocation in quantum networks in order to build scalable, delay-tolerant quantum networks and distributed computing systems. By grounding architectural design in realistic physical assumptions, this work advances the state of the art from theoretical modeling to practical, deployable quantum infrastructure.
This study explores an approach to routing in quantum networks, which targets practical scenarios for quantum networks, mirroring real-world classical networks. By addressing practical constraints, we examine the impact of heterogeneous nodes with mixed efficiency figures on quantum network performance. In particular, we focus on some key parameters in an operational quantum network such as the fraction of nodes with a higher efficiency (called high-quality), path establishment order, end-to-end fidelity, i.e., a measure of the quality of the end-to-end entanglement established. Our simulations show that incorporating knowledge of node quality not only helps boost the fidelity of some of the routing paths but also reduces the number of blocked paths in the quantum network. The study also highlights the critical role of the fraction of high-quality nodes in end-to-end fidelity and explores the trade-offs between upgrading all nodes to high quality or retaining a subset of lower-quality nodes.
Abstract Remote quantum entanglement can enable numerous applications including distributed quantum computation, secure communication, and precision sensing. We consider how a quantum network—nodes equipped with limited quantum processing capabilities connected via lossy optical links—can distribute high-rate entanglement simultaneously between multiple pairs of users. We develop protocols for such quantum “repeater” nodes, which enable a pair of users to achieve large gains in entanglement rates over using a linear chain of quantum repeaters, by exploiting the diversity of multiple paths in the network. Additionally, we develop repeater protocols that enable multiple user pairs to generate entanglement simultaneously at rates that can far exceed what is possible with repeaters time sharing among assisting individual entanglement flows. Our results suggest that the early-stage development of quantum memories with short coherence times and implementations of probabilistic Bell-state measurements can have a much more profound impact on quantum networks than may be apparent from analyzing linear repeater chains. This framework should spur the development of a general quantum network theory, bringing together quantum memory physics, quantum information theory, quantum error correction, and computer network theory.