Quantum computing promises computational capabilities beyond those of classical systems by exploiting superposition, entanglement, and quantum interference. However, the scalability of current noisy intermediate-scale quantum (NISQ) devices is limited by physical and engineering constraints, restricting the number of available qubits. Distributed quantum computing (DQC) mitigates this limitation by interconnecting multiple quantum processing units (QPUs) via quantum networks capable of distributing high-fidelity entanglement. Realizing such networks requires overcoming probabilistic entanglement generation, finite memory coherence, photon loss, and architectural constraints. This dissertation conducts an in-depth and comprehensive study of resource allocation in quantum networks, aiming to support high-throughput and high-fidelity entanglement distribution over lossy infrastructures. Our work spans the quantum networking stack, from physical-layer entanglement distribution protocols to network planning, quantum storage architectures, and distributed quantum computing. We begin by introducing two asynchronous entanglement distribution protocols-Sequential and Parallel-designed for early-stage quantum networks without global synchronization. Unlike many prior models, our protocols account for classical communication delays and quantum memory decoherence, reflecting practical constraints. Through simulations on real-world topologies such as SURFnet, we show that simple mechanisms such as cutoff-based memory management and sequential asynchronous entanglement distribution protocols can deliver competitive performance while significantly simplifying coordination, narrowing the gap between theoretical proposals and deployable protocols. Next, we formulate quantum network planning as a utility maximization problem that jointly considers entanglement distribution rate and fidelity, treating repeater and memory placement as optimization variables. We propose scalable heuristics and mixed-integer formulations, evaluating them under realistic conditions such as finite coherence time of quantum memories, limited number of memories per repeaters and end nodes, and real network topologies such as ESNet. Our findings offer practical design guidance and highlight how optimal placements depend on underlying physical constraints. To support dynamic workloads and respond to traffic bursts, we propose the Quantum Storage Network (QSN) architecture, where storage nodes buffer EPR pairs in advance of demand as an overlay network. This temporal decoupling improves responsiveness and throughput. Simulations across multiple topologies show that QSNs reduce entanglement distribution service latency by up to 40% and provide improved robustness compared to non-overlay designs, underscoring the value of storage-aware planning in future quantum networks. Finally, we focus on DQC, where large-scale quantum circuits are executed across networked QPUs. We propose a window-based circuit partitioning algorithm that minimizes nonlocal gate execution while balancing load across QPUs. Building on this partitioning, we design an adaptive, dependency-aware entanglement generation scheduler that opportunistically initiates remote entanglement as soon as dependent gates are ready, while accounting for realistic constraints such as coherence limits, probabilistic link generation, and Bell-state measurement (BSM) contention. Applied to benchmark circuits such as QAOA and QFT, this joint approach reduces execution delay by up to 35%. We further perform a two-qubit gate fidelity-sensitivity analysis under to show when the distributed quantum computing can be beneficial. Results show that the number of QPUs significantly impacts sensitivity to non-local gate fidelity: with fewer QPUs, distributed execution can outperform monolithic execution under looser fidelity constraints, whereas with more QPUs, achieving the same advantage requires substantially higher non-local gate fidelities relative to local gate fidelities. These findings identify the parameter regimes in which distributed quantum computing is beneficial, mapping break-even regions (as a function of number of QPUs) and quantifying how much cross-QPU (non-local) gate fidelity must improve—or, equivalently, how much per-QPU local gate fidelity must improve under modularization—for distributed execution to outperform a monolithic baseline. Together, these contributions form a cohesive framework for resource allocation in quantum networks in order to build scalable, delay-tolerant quantum networks and distributed computing systems. By grounding architectural design in realistic physical assumptions, this work advances the state of the art from theoretical modeling to practical, deployable quantum infrastructure.
Quantum computing promises computational capabilities beyond those of classical systems by exploiting superposition, entanglement, and quantum interference. However, the scalability of current noisy intermediate-scale quantum (NISQ) devices is limited by physical and engineering constraints, restricting the number of available qubits. Distributed quantum computing (DQC) mitigates this limitation by interconnecting multiple quantum processing units (QPUs) via quantum networks capable of distributing high-fidelity entanglement. Realizing such networks requires overcoming probabilistic entanglement generation, finite memory coherence, photon loss, and architectural constraints. This dissertation conducts an in-depth and comprehensive study of resource allocation in quantum networks, aiming to support high-throughput and high-fidelity entanglement distribution over lossy infrastructures. Our work spans the quantum networking stack, from physical-layer entanglement distribution protocols to network planning, quantum storage architectures, and distributed quantum computing. We begin by introducing two asynchronous entanglement distribution protocols-Sequential and Parallel-designed for early-stage quantum networks without global synchronization. Unlike many prior models, our protocols account for classical communication delays and quantum memory decoherence, reflecting practical constraints. Through simulations on real-world topologies such as SURFnet, we show that simple mechanisms such as cutoff-based memory management and sequential asynchronous entanglement distribution protocols can deliver competitive performance while significantly simplifying coordination, narrowing the gap between theoretical proposals and deployable protocols. Next, we formulate quantum network planning as a utility maximization problem that jointly considers entanglement distribution rate and fidelity, treating repeater and memory placement as optimization variables. We propose scalable heuristics and mixed-integer formulations, evaluating them under realistic conditions such as finite coherence time of quantum memories, limited number of memories per repeaters and end nodes, and real network topologies such as ESNet. Our findings offer practical design guidance and highlight how optimal placements depend on underlying physical constraints. To support dynamic workloads and respond to traffic bursts, we propose the Quantum Storage Network (QSN) architecture, where storage nodes buffer EPR pairs in advance of demand as an overlay network. This temporal decoupling improves responsiveness and throughput. Simulations across multiple topologies show that QSNs reduce entanglement distribution service latency by up to 40% and provide improved robustness compared to non-overlay designs, underscoring the value of storage-aware planning in future quantum networks. Finally, we focus on DQC, where large-scale quantum circuits are executed across networked QPUs. We propose a window-based circuit partitioning algorithm that minimizes nonlocal gate execution while balancing load across QPUs. Building on this partitioning, we design an adaptive, dependency-aware entanglement generation scheduler that opportunistically initiates remote entanglement as soon as dependent gates are ready, while accounting for realistic constraints such as coherence limits, probabilistic link generation, and Bell-state measurement (BSM) contention. Applied to benchmark circuits such as QAOA and QFT, this joint approach reduces execution delay by up to 35%. We further perform a two-qubit gate fidelity-sensitivity analysis under to show when the distributed quantum computing can be beneficial. Results show that the number of QPUs significantly impacts sensitivity to non-local gate fidelity: with fewer QPUs, distributed execution can outperform monolithic execution under looser fidelity constraints, whereas with more QPUs, achieving the same advantage requires substantially higher non-local gate fidelities relative to local gate fidelities. These findings identify the parameter regimes in which distributed quantum computing is beneficial, mapping break-even regions (as a function of number of QPUs) and quantifying how much cross-QPU (non-local) gate fidelity must improve—or, equivalently, how much per-QPU local gate fidelity must improve under modularization—for distributed execution to outperform a monolithic baseline. Together, these contributions form a cohesive framework for resource allocation in quantum networks in order to build scalable, delay-tolerant quantum networks and distributed computing systems. By grounding architectural design in realistic physical assumptions, this work advances the state of the art from theoretical modeling to practical, deployable quantum infrastructure.
In recent years, advances in quantum computing have been driven by substantial improvements in both the number and quality of qubits. As the field progresses, there is growing interest in interconnecting quantum systems to enable scalable computation through Distributed Quantum Computing (DQC) architectures. Consider a distributed quantum application executed across multiple Quantum Processing Units (QPUs) within a quantum data center, where remote gates require establishing entanglement between different QPUs. The creation of such end-to-end entanglement can lead to network congestion and resource contention. To address these challenges, we propose a resource management framework that maximizes fidelity-guaranteed throughput while satisfying dependency constraints. We first formulate the problem as a Mixed-Integer Linear Programming (MILP) model to provide a performance benchmark. Building on this, we develop efficient approximate scheduling algorithms that achieve performance comparable to the optimization solver. Although a trade-off exists between execution time and network throughput, simulation results demonstrate that one of the proposed strategies, Weighted Group Least Resource First (WGLRF), closely approximates the solver’s performance across most scenarios. These findings suggest that the lightweight strategy is sufficient for current DQC settings, offering a practical solution for managing remote-gate resource contention in distributed quantum circuits and improving overall system performance.
As quantum computing transitions into the Noisy Intermediate-Scale Quantum (NISQ) era, scaling monolithic quantum processors remains a significant challenge due to decoherence and operational noise. This dissertation proposes enhancing the connectivity of distributed quantum systems as a scalable solution, focusing on three major research tasks: architectural co-design, operation scheduling optimization, and network topology design. First, to address the physical qubit limits of single-chip processors, we investigate the co-design of network topology and logical qubit allocation for Distributed Quantum Computing (DQC). By modeling qubit interaction as a graph partition problem, we propose a joint optimization framework to minimize inter-QPU communication overhead. Our results demonstrate that the proposed linearized formulation, TACO-L, significantly outperforms traditional two-stage methods in executing complex quantum circuits. Second, we address the challenge of maintaining high-fidelity long-distance entanglements through the optimization of Swapping and Purification Schemes (SPS). We prove that in Binary systems, any optimal swapping and purification tree (OSPT) must follow a Restricted SPT (RT) pattern, where purification is integrated at the link level prior to swapping. Furthermore, we introduce the gradient-based GradTree algorithm, which enables an efficient search for low-cost, high-fidelity scheduling in complex noise environments. Finally, this dissertation formulates the first general Topology Design Problem (TDP) for quantum networks, jointly optimizing quantum memory allocation, optical channel deployment, and entanglement scheduling. By analyzing flow-based and path-based formulations, we prove the optimality of the Relaxed Complete Swapping Tree (RCST) in minimizing the expected cost of entanglement distribution. Collectively, these contributions provide a comprehensive theoretical and algorithmic framework for building scalable, cost-effective global quantum internet architectures.
Quantum networks promise unconditionally secure communication and distributed quantum computing. Realizing these capabilities requires the reliable creation and maintenance of multipartite entanglement across large-scale networks. However, distributing complex entangled states among many nodes becomes increasingly challenging due to physical imperfections, architectural constraints, and the growing demands on network resources. This thesis presents practical methods that address two key facets of this broader problem. First, we introduce graph-theoretic protocols that generate GHZ states in Bell-pair networks using only local operations and classical communication, bypassing NP-hard subroutines while minimizing gate counts and Bell-pair consumption. Benchmarked on random network topologies and validated on IBM quantum hardware, these methods provide a scalable path to distributed quantum computing and multiparty communication. Second, we improve the performance of second-generation quantum repeater networks by incorporating bosonic quantum error correction. We show that memories with shorter coherence times, when protected by error correction, can outperform unencoded memories with significantly longer coherence times. We further address the problem of optimal memory-buffer allocation across repeater networks, introducing policies that reduce waiting times, thereby improving entanglement distribution efficiency. Overall, these results demonstrate practical and effective methods for improving performance and advancing the realization of near-term quantum networks.
Quantum computers in the noisy intermediate-scale quantum (NISQ) era are constrained by limited qubit counts, imperfect gate fidelities, and short coherence times. NISQ-era computers often have too few qubits to run many algorithms, and those that do run often have limited quantum advantage. Distributed quantum computing (DQC) is a promising approach to overcome this, where multiple quantum processors are interconnected through shared entanglement. This work serves as a system overview of an entanglement distribution system. We achieve this by examining a zero-added loss multiplexing (ZALM) entanglement generation source, simulating multi-hop, repeater-less networks, and various routing algorithms to distribute entanglement, and real-hardware quantum experiments that reconstruct entanglement links of degraded fidelity and simulate classical-communication delay. Network simulations evaluate routing and spectrum-allocation algorithms under entanglement-generation-imposed rate constraints, by evaluating both fairness and throughput across network sizes and topologies. We identify two polynomial-time approximation algorithms that perform well, or better than others under these metrics. Using both simulations and quantum hardware, we evaluate how degraded entanglement and communication latency affect teleportation-based distributed multipartite-entanglement-state construction. The results reveal the coupled influence of source rate, routing efficiency, fidelity, and classical delay on networked entanglement distribution and DQC performance, providing a reproducible framework for both experimental and simulated studies of near-term DQC.
Distributed Quantum Computing (DQC) enables the execution of quantum circuits across multiple interconnected quantum processing units (QPUs), but requiring efficient qubit allocation and network topology design to optimize computational performance. Proper qubit allocation minimizes entanglement costs across QPUs, balances computational workload, and ensures efficient execution of quantum computing tasks. Meanwhile, network topology plays a crucial role in reducing entanglement routing complexity and communication overhead for remote quantum gate operations. In this paper, we propose a joint optimization framework for network topology design and qubit allocation in DQC to minimize the communication overhead. We formulate the problem as a tractable integer nonlinear programming model that explicitly incorporates entanglement routing, thereby ensuring a more tractable optimization process. To further improve computational efficiency, we present a partially linearized version of the problem, making it solvable using any classical optimization solver. Extensive simulations on both random and real-world quantum circuits validate the effectiveness of our proposed approach, demonstrating its capability to handle complex quantum circuits while reducing communication costs in DQC.
The quantum internet enables distribution of quantum states across distant nodes, supporting secure communication, distributed computing, and quantum sensing. Unlike classical networks, it is constrained by the no cloning theorem, probabilistic entanglement generation, decoherence, and hardware drift, making classical abstractions inadequate. Scalable quantum networking therefore requires new architectures, protocols, and optimisation methods that explicitly account for these limitations.
This thesis studies the architecture, routing, and operation of quantum networks under realistic constraints, focusing on bipartite entanglement distribution over quantum repeater networks. Key metrics include end to end fidelity, throughput, scalability, and fairness. At the network layer, routing strategies are developed beyond assumptions of homogeneous nodes and full network knowledge. Routing under heterogeneous repeater efficiencies shows how partial knowledge of node quality improves fidelity and reduces path blocking. A grey box routing approach is then introduced, where path selection relies only on topology and end to end estimates, achieving robustness and fairness without detailed link information.
At the link layer, calibration and hardware drift are addressed through a calibration aware model separating activation and calibration phases. For linear repeater chains, an optimal calibration schedule is derived to balance operation time and calibration overhead. This is extended to general topologies with shared links, where a greedy orchestration heuristic is proposed.
Finally, the thesis connects network protocols with hardware via an instruction set architecture for programmable quantum repeater nodes based on NV centers, enabling coherent programmability and linking physical operations to higher layer protocols.