Quantum squeezing can improve the ultimate measurement precision by squeezing one desired fluctuation of the two physical quantities in Heisenberg relation. We propose a scheme to obtain squeezed states through graphene nanoelectromechanical system (NEMS) taking advantage of their thin thickness in principle. Two key criteria of achieving squeezing states, zero-point displacement uncertainty and squeezing factor of strained multilayer graphene NEMS, are studied. Our research promotes the measured precision limit of graphene-based nano-transducers by reducing quantum noises through squeezed states.
Quantum squeezing can improve the ultimate measurement precision by squeezing one desired fluctuation of the two physical quantities in Heisenberg relation. We propose a scheme to obtain squeezed states through graphene nanoelectromechanical system (NEMS) taking advantage of their thin thickness in principle. Two key criteria of achieving squeezing states, zero-point displacement uncertainty and squeezing factor of strained multilayer graphene NEMS, are studied. Our research promotes the measured precision limit of graphene-based nano-transducers by reducing quantum noises through squeezed states.
According to the Heisenberg uncertainty principle, the precision of any physical quantity measurement is limited by quantum fluctuation in general, which leads to the so-called standard quantum limit (SQL). The SQL can be beaten by using squeezed light, hence enhancing the measurement accuracy. Squeezed light is a typical nonclassical light, it exhibits reduced noise in one quadrature component. Since Caves proposed the scheme of phase measurement enhancement with squeezing, squeezed light has been used to enhance measurement precision in many areas. This review focuses on the following four kinds of precision measurements based on squeezed light: the measurements of relative phase, small lateral displacement and tilt, magnetic field, and clock synchronization. For all of these measurements, vacuum squeezing has been used to enhance measurement precision, while the types of squeezing (squeezing angle, transverse mode, polarization etc.) are different. For phase measurement, quadrature squeezing is injected into the conventionally unused input port of Mach-Zehnder interferometer (MZI) or Michelson interferometer (MI). For displacement or tilt measurement, a vacuum squeezing beam of a special transverse mode is coupled into an intense coherent beam, yielding a spatial-squeezed light whose transverse position or tilt angle noise is lower than that of a classical light beam. Based on the Faraday effect of polarization rotation, the magnetic field can be detected precisely. The precision can be increased further by using the polarization squeezing. The polarization squeezing can be generated by coupling two orthogonal polarized beams together, a coherent beam and a vacuum squeezed beam. Various polarization squeezing can be illustrated on the Poincaré sphere. Finally, in the clock synchronization based on the optical frequency comb, squeezed light can be used to enhance the time measurement precision. A theoretical scheme with multimode squeezing of supermode (a kind of mode describing the frequency mode of a pulse laser beam) is introduced. The squeezing has extensively been applied into the quantum precision measurements such as gravitational wave detection as well as biological measurement and will play a more important role in the near future.
Physics
Quantum mechanically, an object can be described by a pair of noncommuting observables, typically by its position and momentum. The precision to which these observables can be measured is limited by unavoidable quantum fluctuations. However, the method of “squeezing” allows the fluctuations to be manipulated, while preserving the Heisenberg uncertainty relation. This allows improved measurement precision for one observable at the expense of increased fluctuations in the other. Burd et al. now show that an additional displacement of a trapped atom results in amplification of the squeezing and a further improvement in the precision with which the displacement can be determined (see the Perspective by Schleier-Smith). This technique should be useful for a number of applications in metrology.
Science , this issue p. [1163][1]; see also p. [1137][2]
[1]: /lookup/doi/10.1126/science.aaw2884
[2]: /lookup/doi/10.1126/science.aax0143
A measurable quadrature of a squeezed quantum state manifests a small uncertainty below the Heisenberg limit. This phenomenon has the potential to enable several extraordinary applications in quantum information, metrology and sensing, and other fields. Several techniques have been implemented to realize squeezed electromagnetic states, including microwave fields and optical fields. However, hybrid squeezed modes (that incorporate both microwave and optical fields) have not yet been proposed despite their vital functionality to combine the two worlds of quantum superconducting systems and photonics systems. In this work, for the first time, we propose a novel approach to achieve two-mode squeezing of microwave and optical fields using graphene based structure. The proposed scheme includes a graphene layered structure that is driven by a quantum microwave voltage and subjected to two optical fields of distinct frequencies. By setting the optical frequency spacing equal to the microwave frequency, an interaction occurs between the optical and microwave fields through electrical modulation of the graphene conductivity. We show that significant hybrid two-mode squeezing, that includes one microwave field and one optical field, can be achieved. Furthermore, the microwave frequency can be tuned over a vast range by modifying the operation parameters.
A pair of conjugate observables, such as the quadrature amplitudes of harmonic motion, have fundamental fluctuations that are bound by the Heisenberg uncertainty relation.However, in a squeezed quantum state, fluctuations of a quantity can be reduced below the standard quantum limit, at the cost of increased fluctuations of the conjugate variable.Here we prepare a nearly macroscopic moving body, realized as a micromechanical resonator, in a squeezed quantum state.We obtain squeezing of one quadrature amplitude 1.1 Æ 0.4 dB below the standard quantum limit, thus achieving a long-standing goal of obtaining motional squeezing in a macroscopic object.
Summary form only given. In high-precision atomic experiments such as atomic interferometry, the accuracy is ultimately limited by the so-called quantum projection noise, due to the fact that the atoms are not in an eigenstate of the measured quantity. In an ensemble of N independent atoms, fluctuations proportional to N/sup -1/2/ result from this effect. A few years ago, it was shown that using squeezed atomic states would allow to reduce these fluctuations, in the same way as squeezed states of light allow to obtain noise reduction in measurements of the electromagnetic field.
While it is true that quantum mechanics imposes strict limits on the precision of measurements, we can sometimes improve measurement precision without violating the uncertainty principle. The rub is that this improvement may be formidable to achieve in practice—and always comes at the expense of a loss in the precision of a complementary measurement. Last October a team at AT&T Bell Labs succeeded in reducing the noise observed from an optical cavity below the “shot noise”—the level of fluctuations associated with variations in the vacuum fields, which is the ultimate limit to accuracy that would be predicted by semiclassical models. Although the Bell Labs experiment reduced the noise below this level by only 7 to 10%, it bolstered hopes that continued progress might eventually yield reductions in noise by factors of ten. Manipulation of the quantum noise limitations might be absolutely critical to such precision measurements as detection of gravity waves, whose faint signals are likely to be near the measurement limit of laser interferometers or mechanical oscillators. The phenomenon might possibly find applications in optical communication or optical memory systems.