Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Superconductor Science and Technology

Superconductive passive phase shifter for integrated RSFQ digital circuits

Boyko Dimov, D Balashov, M. Khabipov, Thomas Ortlepp, F-Im Buchholz, Alexander B Zorin, J. Niemeyer, Friedrich Uhlmann

Published Oct 18, 2007• 4 citations
Publisher

Abstract

A vital precondition for the realization of rapid single-flux quantum (RSFQ) digital circuits with reduced critical currents of the Josephson junctions is the implementation of an efficient technique for superconductive phase dropping. In this paper, we present a novel phase shifting element consisting of a miniature superconductive ring located over a ground plane hole. Contrary to the solutions reported up to now, this topology can be simply integrated within complex digital RSFQ circuits realized with conventional fabrication technology.

DOI
10.1088/0953-2048/20/11/s07

Related papers

Implementation of superconductive passive phase shifters in high-speed integrated RSFQ digital circuits

Boyko Dimov, D Balashov, M. Khabipov +5 more

The reduction of the critical current density in rapid single-flux quantum (RSFQ) circuits enables new application fields, like quantum computing and photonic detector readout. The low current density fabrication process creates new design challenges, such as lower stability against thermal fluctuations, violation of the lumped elements condition for microstrip inductances and increased sensitivity to the technological spread. To overcome these issues, we suggest a passive phase shifter as a promising alternative technique for superconductive phase dropping in the RSFQ electronics. Here, we study experimentally their applicability in high-speed RSFQ digital circuits. Conclusions are drawn about the impact of the passive phase shifters on the complexity, the speed and the bit error rate of the investigated RSFQ circuits. We demonstrate the successful operation of different circuits with implemented passive phase shifters at low and high speeds.

Superconductor Science and Technology•Feb 25, 2008•10 citations

Phase-Drop Realization Within RSFQ Digital Circuits With Reduced Josephson Current Density

Boyko Dimov, Thomas Ortlepp, Friedrich Uhlmann

Within the classical Rapid Single-Flux Quantum (RSFQ) digital designs, the superconductive phase dropping necessary for the optimal SFQ data processing is realized with short sections of transmission lines serving as lumped inductances. This approach meets several hard restrictions about some promising future RSFQ applications requiring a drastic reduction of the junctions' critical currents. In this paper, we analyse these restrictions, and present an alternative and experimentally verified technique for superconductive phase dropping, which is compatible with any RSFQ fabrication technology. This technique provides compact and robust RSFQ digital circuits with highly improved fabrication yield.

IEEE Transactions on Applied Superconductivity•Jun 1, 2007•4 citations

Passive Phase Shifter for Superconducting Josephson Circuits

D Balashov, Boyko Dimov, M. Khabipov +6 more

Quantized values of magnetic flux trapped in a superconducting loop enable a new type of passive phase shifting elements. These elements can be incorporated into digital Josephson circuits making their design compact. We have proven the functionality of such phase shifters fabricated in conventional Nb/Al trilayer technology. We report on the successful low speed operation of a rapid single flux quantum toggle flip-flop circuit with the integrated passive pi-phase shifting element.

IEEE Transactions on Applied Superconductivity•Jun 1, 2007•22 citations

Controlled initialization of superconducting π-phaseshifters and possible applications

Olaf Mielke, Thomas Ortlepp, J. Kunert +2 more

The rapid single-flux quantum electronics (RSFQ) is a superconducting, naturally digital circuit family which is currently close to being commercially applied. RSFQ is outstanding because of its very low switching energy resulting in very low power consumption. This advantage causes, however, a significant influence of thermal noise. For industrial applications, a certain noise immunity is required which is still a challenge, especially for circuits of higher complexity. Integrating phase-shifting elements is a new concept for further improvements concerning stability against the influence of thermal noise. We have already shown that the implementation of phase-shifting elements significantly reduces the influence of thermal noise on circuit behavior by experimentally analyzing the bit-error rate (Mielke et al 2009 IEEE Trans. Appl. Supercond. 19 621–5). Concepts which are easily implementable in standard niobium technology are especially promising. The π-phaseshifter consists of a superconducting loop which is able to store a single flux quantum. The loop current related to the stored flux creates a well-defined phase shift. To achieve the correct functionality of complex circuits it is essential to store exactly one flux quantum in each π-phaseshifter during the cooling down of the chip. Thus, for studying the feasibility of this new approach, the initialization reliability of the π-phaseshifter needs to be verified. We present an experimental investigation of this reliability to obtain a general assessment for the application of the π-phaseshifter in niobium technology. Furthermore, we compare the configuration shielded by a solid ground plane with a configuration with a ground-plane hole below the π-phaseshifter. Justified by the experimental results we suggest programmable RSFQ circuits based on π-phaseshifters. The characteristics of these devices can be influenced by a controlled initialization of the π-phaseshifter. The fabrication was performed by FLUXONICS Foundry.

Superconductor Science and Technology•Apr 1, 2010•6 citations

Rapid single-flux quantum logic using π-shifters

Alexey Vladimirovich Ustinov, V. K. Kaplunenko

We have found that the size of some rapid single-flux quantum (RSFQ) logic cells based on conventional 0-type Josephson junctions can be significantly reduced by using a π-type junction as a phase shifter in passive (nonswitching) mode. In comparison with the recently suggested active (switching) π-junctions mode, the passive mode offers much greater operation margins for their critical current Icπ. This gives π-junctions a chance to be implemented in RSFQ designs in the near future. As an example, we have simulated the operation of a toggle flip flop with zero-geometrical inductance of the fluxon storage loop. Simulations show that the parametric inductance of the π-junction and its normal resistance Rn form a low-pass filter, which sets the low limit for π-junctions IcπRn product, but offers a wide range of variations of the other parameters. The possible reduction of RSFQ cell size by using π-junctions opens the way to scale superconducting logic circuits down to the submicron dimensions.

Journal of Applied Physics•Oct 3, 2003•130 citations

Comparison of RSFQ Logic Cells With and Without Phase Shifting Elements by Means of BER Measurements

Olaf Wetzstein, Thomas Ortlepp, Ronny Stolz +3 more

Rapid single flux quantum (RSFQ) electronics is characterized by a very low switching energy. This advantage leads to a noise susceptibility, which becomes a challenge for large-scale circuits as well as for circuits using Josephson junctions with reduced critical current density. We demonstrate an improved operation range and advanced noise immunity of basic cells resulting from an implemented phase shifting element. One of those elements is the π-phase shifter. It consists of a single flux quantum trapped in a superconducting loop. The π-phase shifter can be easily produced in standard niobium technology without any process modifications. Utilizing a mature process brings advantages concerning the reliable fabrication of complex circuits.

IEEE Transactions on Applied Superconductivity•Feb 3, 2011•13 citations
A vital precondition for the realization of rapid single-flux quantum (RSFQ) digital circuits with reduced critical currents of the Josephson junctions is the implementation of an efficient technique for superconductive phase dropping. In this paper, we present a novel phase shifting element consisting of a miniature superconductive ring located over a ground plane hole. Contrary to the solutions reported up to now, this topology can be simply integrated within complex digital RSFQ circuits realized with conventional fabrication technology.
The reduction of the critical current density in rapid single-flux quantum (RSFQ) circuits enables new application fields, like quantum computing and photonic detector readout. The low current density fabrication process creates new design challenges, such as lower stability against thermal fluctuations, violation of the lumped elements condition for microstrip inductances and increased sensitivity to the technological spread. To overcome these issues, we suggest a passive phase shifter as a promising alternative technique for superconductive phase dropping in the RSFQ electronics. Here, we study experimentally their applicability in high-speed RSFQ digital circuits. Conclusions are drawn about the impact of the passive phase shifters on the complexity, the speed and the bit error rate of the investigated RSFQ circuits. We demonstrate the successful operation of different circuits with implemented passive phase shifters at low and high speeds.
Within the classical Rapid Single-Flux Quantum (RSFQ) digital designs, the superconductive phase dropping necessary for the optimal SFQ data processing is realized with short sections of transmission lines serving as lumped inductances. This approach meets several hard restrictions about some promising future RSFQ applications requiring a drastic reduction of the junctions' critical currents. In this paper, we analyse these restrictions, and present an alternative and experimentally verified technique for superconductive phase dropping, which is compatible with any RSFQ fabrication technology. This technique provides compact and robust RSFQ digital circuits with highly improved fabrication yield.
The rapid single-flux quantum electronics (RSFQ) is a superconducting, naturally digital circuit family which is currently close to being commercially applied. RSFQ is outstanding because of its very low switching energy resulting in very low power consumption. This advantage causes, however, a significant influence of thermal noise. For industrial applications, a certain noise immunity is required which is still a challenge, especially for circuits of higher complexity. Integrating phase-shifting elements is a new concept for further improvements concerning stability against the influence of thermal noise. We have already shown that the implementation of phase-shifting elements significantly reduces the influence of thermal noise on circuit behavior by experimentally analyzing the bit-error rate (Mielke et al 2009 IEEE Trans. Appl. Supercond. 19 621–5). Concepts which are easily implementable in standard niobium technology are especially promising. The π-phaseshifter consists of a superconducting loop which is able to store a single flux quantum. The loop current related to the stored flux creates a well-defined phase shift. To achieve the correct functionality of complex circuits it is essential to store exactly one flux quantum in each π-phaseshifter during the cooling down of the chip. Thus, for studying the feasibility of this new approach, the initialization reliability of the π-phaseshifter needs to be verified. We present an experimental investigation of this reliability to obtain a general assessment for the application of the π-phaseshifter in niobium technology. Furthermore, we compare the configuration shielded by a solid ground plane with a configuration with a ground-plane hole below the π-phaseshifter. Justified by the experimental results we suggest programmable RSFQ circuits based on π-phaseshifters. The characteristics of these devices can be influenced by a controlled initialization of the π-phaseshifter. The fabrication was performed by FLUXONICS Foundry.
We have found that the size of some rapid single-flux quantum (RSFQ) logic cells based on conventional 0-type Josephson junctions can be significantly reduced by using a π-type junction as a phase shifter in passive (nonswitching) mode. In comparison with the recently suggested active (switching) π-junctions mode, the passive mode offers much greater operation margins for their critical current Icπ. This gives π-junctions a chance to be implemented in RSFQ designs in the near future. As an example, we have simulated the operation of a toggle flip flop with zero-geometrical inductance of the fluxon storage loop. Simulations show that the parametric inductance of the π-junction and its normal resistance Rn form a low-pass filter, which sets the low limit for π-junctions IcπRn product, but offers a wide range of variations of the other parameters. The possible reduction of RSFQ cell size by using π-junctions opens the way to scale superconducting logic circuits down to the submicron dimensions.
Rapid single flux quantum (RSFQ) electronics is characterized by a very low switching energy. This advantage leads to a noise susceptibility, which becomes a challenge for large-scale circuits as well as for circuits using Josephson junctions with reduced critical current density. We demonstrate an improved operation range and advanced noise immunity of basic cells resulting from an implemented phase shifting element. One of those elements is the π-phase shifter. It consists of a single flux quantum trapped in a superconducting loop. The π-phase shifter can be easily produced in standard niobium technology without any process modifications. Utilizing a mature process brings advantages concerning the reliable fabrication of complex circuits.