Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Conference on Lasers and Electro-Optics

Microfabricated Surface Trap for Scalable Ion-Photon Interfaces

Peter F. Herskind, Shannon X. Wang, Molu Shi, Yufei Ge, Marko Cetina, Isaac L. Chuang

Published Jan 1, 2011• 0 citations
Publisher

Abstract

We demonstrate a surface electrode ion trap microfabricated on top of a dielectric mirror, with the ion 169 µm above the trap surface. This represents a scalable approach to trapped ion quantum computing with photonic interconnects.
DOI
10.1364/qels.2011.qfh2

Related papers

Microfabricated surface ion trap on a high-finesse optical mirror

Peter F. Herskind, Shannon X. Wang, Molu Shi +3 more

A novel approach to optics integration in ion traps is demonstrated based on a surface electrode ion trap that is microfabricated on top of a dielectric mirror. Additional optical losses due to fabrication are found to be as low as 80 ppm for light at 422 nm. The integrated mirror is used to demonstrate light collection from, and imaging of, a single Sr88(+) ion trapped 169±4 μm above the mirror.

arXiv:1011.5259•Optics Letters•Aug 5, 2011•26 citations

Microfabricated Surface Trap and Cavity Integration for Trapped Ion Quantum Computing

Van Rynbach, Jacques André

Atomic ions trapped in microfabricated surface traps can be utilized as a physical platform with which to build a quantum computer. They possess many of the desirable characteristics of such a device, including high fidelity state preparation and readout, universal logic gates, and long coherence times, and can be readily entangled with each other through photonic interconnects. The use of optical cavities integrated with trapped ion qubits as a photonic interface presents the possibility for order of magnitude improvements in performance in several key areas for their use in quantum computation. The first part of this thesis describes the design and fabrication of a novel surface trap for integration with an optical cavity. The trap is custom made on a highly reflective mirror surface and includes the capability of moving the ion trap location along all three trap axes with nanometer scale precision. The second part of this thesis demonstrates the suitability of small microcavities formed from laser ablated, fused silica substrates with radii of curvature in the 300-500 micron range for use with the mirror trap as part of an integrated ion trap cavity system. Quantum computing applications for such a system include dramatic improvements in the photon entanglement rate of up to 10 kHz, the qubit measurement time down to 1 microsecond, and the qubit measurement error rate down to the 1e-5 range. The final part of this thesis describes a performance simulator for exploring the physical resource requirements and performance demands to scale a quantum computer to sizes capable of implementing quantum algorithms beyond the limits of classical computation.

•Jan 1, 2016•0 citations

Integrated Fresnel Mirrors for Scalable Trapped Ion Quantum Computing

Erik W. Streed, Moji Ghadimi, Valdis Blūms +6 more

Photonic interconnects are a bottleneck to achieving large-scale trapped ion quantum computing. We fabricated a surface trap with diffractive mirrors and achieved sub-wavelength imaging of a trapped ion and 2.0±0.5% coupling into a single-mode fiber.

Conference on Lasers and Electro-Optics•Jan 1, 2016•1 citation

New scalable microfabrication method for surface ion traps and experimental results with trapped ions

Seokjun Hong, M. Lee, H. Cheon +4 more

This paper presents a new microfabrication method for surface ion traps and experimental results with trapped ions. Fabricating ion trap chips is a very formidable task because the top electrodes are vertically spaced more than 10 µm from the bottom electrodes with an indented dielectric layer in the middle. Previous ion traps were fabricated using TEOS timed etch or tungsten sacrificial etch techniques. This paper presents a new microfabrication method, using copper as a sacrificial material for an aluminum-oxide-aluminum ion trap structure. Using the developed method the overhang dimensions of the top aluminum electrodes can be accurately controlled. Fabricated ion trap chips are installed in a 1 × 10−11Torr vacuum environment for ion trapping experiments. Successful results in trapping strings of171Yb+and174Yb+ions as well as manipulating171Yb+ions for qubit operation are demonstrated.

IEEE International Conference on Micro Electro Mechanical Systems (MEMS)•Jan 1, 2015•1 citation

Demonstration of integrated microscale optics in surface-electrode ion traps

J True Merrill, Curtis Volin, David Landgren +10 more

In ion trap quantum information processing, efficient fluorescence collection is critical for fast, high-fidelity qubit detection and ion–photon entanglement. The expected size of future many-ion processors requires scalable light collection systems. We report on the development and testing of a microfabricated surface-electrode ion trap with an integrated high-numerical aperture (NA) micromirror for fluorescence collection. When coupled to a low-NA lens, the optical system is inherently scalable to large arrays of mirrors in a single device. We demonstrate the stable trapping and transport of 40 Ca + ions over a 0.63 NA micromirror and observe a factor of 1.9 enhancement of photon collection compared to the planar region of the trap.

arXiv:1105.4905•New Journal of Physics•Oct 4, 2011•59 citations

A microfabricated surface-electrode ion trap in silicon

J. Britton, Dietrich G. Leibfried, James A. Beall +13 more

The prospect of building a quantum information processor underlies many recent advances ion trap fabrication techniques. Potentially, a quantum computer could be constructed from a large array of interconnected ion traps. We report on a micrometer-scale ion trap, fabricated from bulk silicon using micro-electromechanical systems (MEMS) techniques. The trap geometry is relatively simple in that the electrodes lie in a single plane beneath the ions. In such a trap we confine laser-cooled 24Mg+ ions approximately 40 microns above the surface. The fabrication technique and planar electrode geometry together make this approach amenable to scaling up to large trap arrays. In addition we observe that little laser cooling light is scattered by the electrodes.

arXiv:quant-ph/0605170•May 19, 2006•26 citations
Atomic ions trapped in microfabricated surface traps can be utilized as a physical platform with which to build a quantum computer. They possess many of the desirable characteristics of such a device, including high fidelity state preparation and readout, universal logic gates, and long coherence times, and can be readily entangled with each other through photonic interconnects. The use of optical cavities integrated with trapped ion qubits as a photonic interface presents the possibility for order of magnitude improvements in performance in several key areas for their use in quantum computation. The first part of this thesis describes the design and fabrication of a novel surface trap for integration with an optical cavity. The trap is custom made on a highly reflective mirror surface and includes the capability of moving the ion trap location along all three trap axes with nanometer scale precision. The second part of this thesis demonstrates the suitability of small microcavities formed from laser ablated, fused silica substrates with radii of curvature in the 300-500 micron range for use with the mirror trap as part of an integrated ion trap cavity system. Quantum computing applications for such a system include dramatic improvements in the photon entanglement rate of up to 10 kHz, the qubit measurement time down to 1 microsecond, and the qubit measurement error rate down to the 1e-5 range. The final part of this thesis describes a performance simulator for exploring the physical resource requirements and performance demands to scale a quantum computer to sizes capable of implementing quantum algorithms beyond the limits of classical computation.
This paper presents a new microfabrication method for surface ion traps and experimental results with trapped ions. Fabricating ion trap chips is a very formidable task because the top electrodes are vertically spaced more than 10 µm from the bottom electrodes with an indented dielectric layer in the middle. Previous ion traps were fabricated using TEOS timed etch or tungsten sacrificial etch techniques. This paper presents a new microfabrication method, using copper as a sacrificial material for an aluminum-oxide-aluminum ion trap structure. Using the developed method the overhang dimensions of the top aluminum electrodes can be accurately controlled. Fabricated ion trap chips are installed in a 1 × 10−11Torr vacuum environment for ion trapping experiments. Successful results in trapping strings of171Yb+and174Yb+ions as well as manipulating171Yb+ions for qubit operation are demonstrated.
In ion trap quantum information processing, efficient fluorescence collection is critical for fast, high-fidelity qubit detection and ion–photon entanglement. The expected size of future many-ion processors requires scalable light collection systems. We report on the development and testing of a microfabricated surface-electrode ion trap with an integrated high-numerical aperture (NA) micromirror for fluorescence collection. When coupled to a low-NA lens, the optical system is inherently scalable to large arrays of mirrors in a single device. We demonstrate the stable trapping and transport of 40 Ca + ions over a 0.63 NA micromirror and observe a factor of 1.9 enhancement of photon collection compared to the planar region of the trap.
The prospect of building a quantum information processor underlies many recent advances ion trap fabrication techniques. Potentially, a quantum computer could be constructed from a large array of interconnected ion traps. We report on a micrometer-scale ion trap, fabricated from bulk silicon using micro-electromechanical systems (MEMS) techniques. The trap geometry is relatively simple in that the electrodes lie in a single plane beneath the ions. In such a trap we confine laser-cooled 24Mg+ ions approximately 40 microns above the surface. The fabrication technique and planar electrode geometry together make this approach amenable to scaling up to large trap arrays. In addition we observe that little laser cooling light is scattered by the electrodes.