Monolithic integration of control electronics with superconducting qubits will facilitate scalability of a superconducting quantum computer by reducing the room temperature electronics necessary for performing quantum state manipulation. We report the experimental results of the monolithic integration of an on-chip radiation source with a persistent-current (PC) qubit and dc SQUID measurement device. The devices were fabricated at MIT Lincoln Laboratory in a Nb/Al/AlOx/Nb trilayer process. The two PC qubit states were detected by measuring the switching current of an underdamped dc SQUID magnetometer inductively coupled to the qubit. The radiation source comprised an overdamped dc SQUID operating in the voltage state and inductively coupled to the qubit and measurement SQUID through a low-Q RLC filter. The oscillator was designed to have tunable amplitude and frequency to satisfy the requirements for coherent quantum manipulation of a superconducting PC qubit. We will discuss the measurements in the millikelvin regime and the effects of the oscillator noise on the state of the qubit.
Monolithic integration of control electronics with superconducting qubits will facilitate scalability of a superconducting quantum computer by reducing the room temperature electronics necessary for performing quantum state manipulation. We report the experimental results of the monolithic integration of an on-chip radiation source with a persistent-current (PC) qubit and dc SQUID measurement device. The devices were fabricated at MIT Lincoln Laboratory in a Nb/Al/AlOx/Nb trilayer process. The two PC qubit states were detected by measuring the switching current of an underdamped dc SQUID magnetometer inductively coupled to the qubit. The radiation source comprised an overdamped dc SQUID operating in the voltage state and inductively coupled to the qubit and measurement SQUID through a low-Q RLC filter. The oscillator was designed to have tunable amplitude and frequency to satisfy the requirements for coherent quantum manipulation of a superconducting PC qubit. We will discuss the measurements in the millikelvin regime and the effects of the oscillator noise on the state of the qubit.
We report on the development and test of an integrated system composed of a flux qubit and a rapid single-flux quantum (RSFQ) circuit that allows qubit manipulation. The goal is to demonstrate the feasibility of control electronics integrated on the same chip as the qubit, in view of the application in quantum computation with superconducting devices. RSFQ logic relies on the storage and transmission of magnetic flux quanta and can be profitably used with superconducting qubits because of the speed, scalability, compatibility with the qubit fabrication process and low temperature environment. While standard RSFQ circuitry is well assessed, the application to quantum computing requires a complete rescaling of parameter values, in order to preserve the qubit coherence and reduce the power dissipation. In the system presented in this paper, the qubit role is played by a superconducting loop interrupted by a small dc SQUID, usually called a double SQUID, which behaves as a tunable rf-SQUID. Its energy potential has the shape of a double well, with the barrier between the wells controlled by magnetic flux applied to the inner dc SQUID. Here for the first time we report measurements at a base temperature of 370 mK in which flux control pulses with desired characteristics were supplied by a RSFQ circuit fabricated using non-standard parameters in the same chip as the qubit.
We present the design, fabrication, and characterization of a barrier-tunable superconducting quantum interference device (SQUID) qubit for the study of Maxwell’s demon experiment. In this work, a compound Josephson junction (CJJ) radio-frequency (RF)-SQUID qubit with an overdamped resistively shunted direct-current (DC)-SQUID magnetometer is used to continuously monitor the state of the qubit. The circuit is successfully fabricated with the standard Nb/Al-AlO x /Nb trilayer process of our laboratory and characterized in a low noise measurement system, which is capable of measuring coherent dynamics of superconducting qubits, in an Oxford dilution refrigerator. All circuit parameters are determined accurately by fitting experimental data to theoretical analysis and simulation, which allows us to make a quantitative comparison between the results of the experiment and theory.
We have demonstrated superconducting interconnect technologies that enable a variety of flip-chip 3D integrated structures and packages compatible with high-coherence superconducting qubits. Superconducting indium micro-bumps and underbump metal (UBM) were used to join superconducting qubit chips to superconducting readout and control modules while maintaining high qubit coherence (T1, T2,echo> 20 μs) in the presence of capacitive and inductive coupling between the chips. Scanning electron microscope, X-ray, infrared and confocal microscopy were used to investigate the micro-structure, alignment accuracy, and parallelism of flip-chip qubits. The superconducting readout and control modules can accommodate both niobium and aluminum-based circuit and amplifier fabrication processes, including shadow-evaporated aluminum or Nb/Al-AlOx/Nb trilayer Josephson junctions (JJs). We present results for up to 16 active superconducting chips having trilayer junctions bonded to a passive superconducting module. The I-V characteristics and switching behavior were measured for flip-chip-connected JJ arrays with 40-20,000 JJs. Our approach maintained chip-level junction critical current and qubit coherence, demonstrating it to be a viable approach to building larger quantum computing systems. This paper also discusses packaging approaches to developing a quantum-to-classical interface in a cryogenic environment with multiple temperature stages.
The observation and study of macroscopic quantum coherence (MQC), i.e. the coherent superposition and evolution of macroscopically distinct quantum states, is of great importance for both our understanding of nature and for quantum engineering, for example in quantum computing. Recently a first indication of MQC in a system of SQUIDs has been indirectly observed by means of spectroscopic techniques. Applications like quantum computing, however, require the manipulation and the observation of the time evolution of the MQC states. We have realized a system of SQUIDs for the study of MQC. Our system, based on trilayer Nb/AlOx/Nb technology, consists of a double rf-SQUID, source of the MQC state, inductively coupled to a non-hysteretic dc-SQUID magnetometer and to a hysteretic dc-SQUID threshold detector, used for the read-out of the magnetic flux state. The magnetometer is used to test and monitor the rf-SQUID behaviour, while the hysteretic dc-SQUID is used to perform fast measurements with a reduced back action on the rf-SQUID. We present measurements performed at 4.2 K and at 20 mK to characterize the single devices and their overall behaviour, and a scheme for the use of a set of SQUIDs as a qubit system.
In recent years, the quantum behaviour of Josephson devices has been the object of thorough experimental investigation, mainly with the objective of studying quantum mechanics in macroscopic objects. At present, the same quantum properties are being exploited with the aim of the physical implementation of quantum bits and quantum registers. Here we present measurements on a system containing potential qubits, namely a rf SQUID and a hysteretic dc SQUID, magnetically coupled, under microwave excitation; the devices are realized on a single chip with trilayer Nb/AlO x /Nb technology. On this system we have performed a set of measurements to test the dc SQUID response to short pulses of microwaves ranging from 2 to 32 GHz. A first analysis of our results indicates the presence of population oscillations in the hysteretic dc SQUID. This result is very promising in view of using SQUIDs for more complex qubits systems.
This thesis examines the behavior of dc SQUID phase qubits in terms of their proposed use in a quantum computer. In a phase qubit, the two lowest energy states (n=0 and n=1) of a current-biased Josephson junction form the qubit states, with the gauge invariant phase difference across the junction being relatively well defined. In a dc SQUID phase qubit, the Josephson junction is isolated from the environment using an inductive isolation network and Josephson junction, which are connected across the phase qubit junction to form a dc SQUID. Five dc SQUID phase qubits were examined at temperatures down to 25 mK. Three of the devices had qubit junctions that were Nb/AlOx/Nb junctions with critical currents of roughly 30 microamps. The other two had Al/AlOx/Al junctions with critical currents of roughly 1.3 microamps. The device that had the best performance was an Al/AlOx/Al device with a relaxation time of 30 ns and a coherence time of 24 ns. The devices were characterized using microwave spectroscopy, Rabi oscillations, relaxation and Ramsey fringe measurements. I was also able to see coupling between two Nb/AlOx/Nb dc SQUID phase qubits and perform Rabi oscillations with them. The Nb/AlOx/Nb devices had a relaxation time and coherence time that were half that of the Al/AlOx/Al device. One of the goals of this work was to understand the nature of parasitic quantum systems (TLSs) that interact with the qubit. Coupling between a TLS and a qubit causes an avoided level crossing in the transition spectrum of the qubit. In the Al/AlOx/Al devices unintentional avoided level crossings were visible with sizes up to 240 MHz, although most visible splittings were of order ~20 MHz. The measured spectra were compared to a model of the avoided level crossing based on the TLSs coupling to the junction, through either the critical current or the voltage across the junction.