Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Conference on Lasers and Electro-Optics

Hybrid integration of fiber pigtailed silicon nitride microcavities with atom-chips for cavity QED applications

Paul E. Barclay, Kartik A. Srinivasan, Matthew Borselli, Thomas James Johnson, Oskar J. Painter, Benjamin Lev, Hideo Mabuchi

Published Jan 1, 2006• 0 citations
Publisher

Abstract

Fiber coupled silicon nitride microcavities with Q > 3.6 times 106and effective mode volume3at wavelengths resonant with alkali atom transitions are robustly integrated with magnetostatic atom-chips.
DOI
10.1109/cleo.2006.4628588

Related papers

Integration of fiber-coupled high-Q SiNx microdisks with atom chips

Paul E. Barclay, Kartik A. Srinivasan, Oskar J. Painter +2 more

Micron scale silicon nitride (SiNx) microdisk optical resonators are demonstrated with Q=3.6×106 and an effective mode volume of 15(λ∕n)3 at near-visible wavelengths. A hydrofluoric acid wet etch provides sensitive tuning of the microdisk resonances, and robust mounting of a fiber taper provides efficient fiber optic coupling to the microdisks while allowing unfettered optical access for laser cooling and trapping of atoms. Measurements indicate that cesium adsorption on the SiNx surfaces significantly red detunes the microdisk resonances. Parallel integration of multiple (10) microdisks with a single fiber taper is also demonstrated.

arXiv:quant-ph/0605234•Applied Physics Letters•Sep 25, 2006•134 citations

Micro- and Nano-Photonics for Chip-Scale Solid-State and Atomic Cavity QED

Oskar J. Painter

In this talk I will describe our progress in developing integrated atom-photon chips and monolithic semiconductor quantum dot-microcavity systems for chip-scale cavity QED. Article not available.

Quantum Electronics and Laser Science Conference•May 6, 2007•0 citations

Integrated optics for coupled-cavity quantum electrodynamics

Guillaume Lepert

This thesis reports on the development of an array of plane-concave Fabry-Perot microcavities containing atoms (or other quantum emitters), interconnected by UV-written waveguides on a silica-on-silicon chip. The microcavities are formed by a mirror coated on the end facet of the chip and an array of spherical micromirrors etched on silicon. This is to our knowledge the first attempt at implementing the emerging coupled-cavities QED paradigm. The device we propose possesses a degree of control, flexibility and tuning unmatched in other suggested implementations: The atoms can be manipulated inside the cavity by auxiliary lasers and the cavity-cavity coupling rate as well as the atom-cavity coupling can be tuned. It is highly scalable. Calculation of the complete (classical) optical spectrum of the device is presented. The quantum dynamics that may eventually be observed has also been studied. Waveguide chips containing couplers and phase shifter have been fabricated. We have successfully demonstrated the operation of the elementary sub-systems: the strong optical coupling between a microcavity and a waveguide resonator, and the tunable strong coupling between two evanescently coupled waveguide resonators. No experiments with atoms or other quantum emitters were attempted, because the waveguide propagation loss is so large that no quantum physics can be observed. There is hope that this can be overcome in the future by using other waveguide technologies.

•Jan 1, 2013•2 citations

Cavity QED with chip-based toroidal microresonators

Barak Dayan, T. Aoki, E. Wilcut +8 more

We report the demonstration of strong coupling between single Cesium atoms and a high-Q chip-based microresonator. Our toroidal microresonators are compact, Si chip-based whispering gallery mode resonators that confine light to small volumes with extremely low losses, and are manufactured in large numbers by standard lithographic techniques. Combined with the capability to couple efficiently light to and from these microresonators by a tapered optical fiber, toroidal microresonators offer a promising avenue towards scalable quantum networks. Experimentally, laser cooled Cs atoms are dropped onto a toroidal microresonator while a probe beam is critically coupled to the cavity mode. When an atom interacts with the cavity, it modifies the resonance spectrum of the cavity, leading to rejection of some of the probe light from the cavity, and thus to an increase in the output power. By observing such transit events while systematically detuning the cavity from the atomic resonance, we determine the maximal accessible single-photon Rabi frequency of Ω0/2π ≈ (100 ± 24) MHz. This value puts our system in the regime of strong coupling, being significantly larger than the dissipation rates in our system.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Sep 11, 2007•1 citation

Fiber-coupled nanophotonic devices for nonlinear optics and cavity QED

Paul E. Barclay

The sub-wavelength optical confinement and low optical loss of nanophotonic devices dramatically enhances the interaction between light and matter within these structures. When nanophotonic devices are combined with an efficient optical coupling channel, nonlinear optical behavior can be observed at low power levels in weakly-nonlinear materials. In a similar vein, when resonant atomic systems interact with nanophotonic devices, atom-photon coupling effects can be observed at a single quanta level. Crucially, the chip based nature of nanophotonics provides a scalable platform from which to study these effects. This thesis addresses the use of nanophotonic devices in nonlinear and quantum optics, including device design, optical coupling, fabrication and testing, modeling, and integration with more complex systems. We present a fiber taper coupling technique that allows efficient power transfer from an optical fiber into a photonic crystal waveguide. Greater than 97% power transfer into a silicon photonic crystal waveguide is demonstrated. This optical channel is then connected to a high-Q (> 40,000), ultra-small mode volume (V 44% of the photons input to a fiber. This permits the observation of optical bistability in silicon for sub-mW input powers at telecommunication wavelengths. To port this technology to cavity QED experiments at near-visible wavelengths, we also study silicon nitride microdisk cavities at wavelengths near 852 nm, and observe resonances with Q > 3 million and V

•Oct 1, 2007•4 citations

Optical Microcavities for Efficient Qubit-Photon Interfaces and Networked Quantum Computing

Ben Walker-Pearl, Laiyi Weng, Huili Hou +5 more

Cavities enable efficient qubit-photon interfaces–a path to scale-out quantum computing cores. Here, we present the performance of our cavity-technology, its suitability to extract NIR-photons from atomic qubits and robust integration into a UHV environment.

Quantum 2.0 Conference and Exhibition•Jan 1, 2025•0 citations
Micron scale silicon nitride (SiNx) microdisk optical resonators are demonstrated with Q=3.6×106 and an effective mode volume of 15(λ∕n)3 at near-visible wavelengths. A hydrofluoric acid wet etch provides sensitive tuning of the microdisk resonances, and robust mounting of a fiber taper provides efficient fiber optic coupling to the microdisks while allowing unfettered optical access for laser cooling and trapping of atoms. Measurements indicate that cesium adsorption on the SiNx surfaces significantly red detunes the microdisk resonances. Parallel integration of multiple (10) microdisks with a single fiber taper is also demonstrated.
This thesis reports on the development of an array of plane-concave Fabry-Perot microcavities containing atoms (or other quantum emitters), interconnected by UV-written waveguides on a silica-on-silicon chip. The microcavities are formed by a mirror coated on the end facet of the chip and an array of spherical micromirrors etched on silicon. This is to our knowledge the first attempt at implementing the emerging coupled-cavities QED paradigm. The device we propose possesses a degree of control, flexibility and tuning unmatched in other suggested implementations: The atoms can be manipulated inside the cavity by auxiliary lasers and the cavity-cavity coupling rate as well as the atom-cavity coupling can be tuned. It is highly scalable. Calculation of the complete (classical) optical spectrum of the device is presented. The quantum dynamics that may eventually be observed has also been studied. Waveguide chips containing couplers and phase shifter have been fabricated. We have successfully demonstrated the operation of the elementary sub-systems: the strong optical coupling between a microcavity and a waveguide resonator, and the tunable strong coupling between two evanescently coupled waveguide resonators. No experiments with atoms or other quantum emitters were attempted, because the waveguide propagation loss is so large that no quantum physics can be observed. There is hope that this can be overcome in the future by using other waveguide technologies.
We report the demonstration of strong coupling between single Cesium atoms and a high-Q chip-based microresonator. Our toroidal microresonators are compact, Si chip-based whispering gallery mode resonators that confine light to small volumes with extremely low losses, and are manufactured in large numbers by standard lithographic techniques. Combined with the capability to couple efficiently light to and from these microresonators by a tapered optical fiber, toroidal microresonators offer a promising avenue towards scalable quantum networks. Experimentally, laser cooled Cs atoms are dropped onto a toroidal microresonator while a probe beam is critically coupled to the cavity mode. When an atom interacts with the cavity, it modifies the resonance spectrum of the cavity, leading to rejection of some of the probe light from the cavity, and thus to an increase in the output power. By observing such transit events while systematically detuning the cavity from the atomic resonance, we determine the maximal accessible single-photon Rabi frequency of Ω0/2π ≈ (100 ± 24) MHz. This value puts our system in the regime of strong coupling, being significantly larger than the dissipation rates in our system.
The sub-wavelength optical confinement and low optical loss of nanophotonic devices dramatically enhances the interaction between light and matter within these structures. When nanophotonic devices are combined with an efficient optical coupling channel, nonlinear optical behavior can be observed at low power levels in weakly-nonlinear materials. In a similar vein, when resonant atomic systems interact with nanophotonic devices, atom-photon coupling effects can be observed at a single quanta level. Crucially, the chip based nature of nanophotonics provides a scalable platform from which to study these effects. This thesis addresses the use of nanophotonic devices in nonlinear and quantum optics, including device design, optical coupling, fabrication and testing, modeling, and integration with more complex systems. We present a fiber taper coupling technique that allows efficient power transfer from an optical fiber into a photonic crystal waveguide. Greater than 97% power transfer into a silicon photonic crystal waveguide is demonstrated. This optical channel is then connected to a high-Q (> 40,000), ultra-small mode volume (V 44% of the photons input to a fiber. This permits the observation of optical bistability in silicon for sub-mW input powers at telecommunication wavelengths. To port this technology to cavity QED experiments at near-visible wavelengths, we also study silicon nitride microdisk cavities at wavelengths near 852 nm, and observe resonances with Q > 3 million and V