Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Journal of the Institute of Electronics and Information Engineers

Effect of Line-Width of Optical Sources on Performance of Spectral Amplitude Coding Optical CDMA Systems

Yoon Kyoo Jhee

Published Feb 25, 2015• 0 citations
Publisher

Abstract

본 논문은 광원 라인폭이 Spectral Amplitude Coding (SAC) CDMA 시스템에 미치는 영향을 구하였다. q와 m값에 따라 다양한 코드를 구현할 수 있으므로 symmetric balance incomplete block design(BIBD) 코드를 분석에 사용하였다. 그 결과 입력파워가 큰 경우 (Psr =-10 dBm) 이상적인 BIBD 코드가 비이상적인 BIBD 코드보다 더 좁은 광원 라인폭이 요구되었다. 그러나 입력파워가 작은 경우 (Psr =-25 dBm)에는 그 반대로 비이상적인 BIBD 코드가 이상적인 BIBD 코드보다 더 좁은 광원 라인폭이 필요했다.

DOI
10.5573/ieie.2015.52.2.119

Related papers

The Impact of Hardware Impairments and Imperfect Channel State Information on Physical Layer Security

Kyusung Shim, Tri Nhu Do, Beongku An

물리계층보안은 신호의 물리적 특성을 이용하여 정보를 보호하는 보안 기법이다. 현재 이에 대한 연구가 활발히 진행 중이지만 해결해야할 다음과 같은 문제점들이 존재한다. 도청자는 자신의 존재를 숨기기 위해서 자신의 채널상태정보를 다른 합법적인 노드와 공유하지는 않는다. 그리고 노드가 신호를 전송할 때 하드웨어 왜곡이 발생하지만 많은 연구들은 노드 모델들이 이상적인 것으로 가정을 하고, 하드웨어 왜곡문제를 고려하지 않고 있다. 이와 같은 문제점들을 해결하기 위한 본 논문의 주요한 특징 및 기여도는 다음과 같다. 첫째, 도청자의 채널상태정보를 얻기 위해서 조력자노드를 합법적인 노드주변에 설치하고, 조력자노드의 채널상태정보를 이용하여 노드모델에서 하드웨어 왜곡을 고려한다. 둘째, 제안된 시스템 모델의 인터셉트 확률에 대한 Closed-Form Expression을 제시한다. 제안된 시스템의 성능평가를 위해서 다양한 시뮬레이션를 통하여 제안된 시스템 모델의 물리계층보안에 미치는 영향을 알아본 결과, 불완전한 채널상태정보는 인터셉트 확률에는 영향을 미치지 못한 반면에, 불완전한 노드모델의 경우, 인터셉트 확률, 에르고딕 시크리스 용량과 보안채널용량에 영향을 준다는 것을 보여준다.

Journal of the Institute of Electronics and Information Engineers•Apr 25, 2016•0 citations

Reconstructed Modified Double Weight Codes for Spectral-Amplitude-Coding Optical CDMA

지윤규

변형된 modified double weight code를 사용하여 효율적인 spectral-amplitude-coding optical CDMA를 구현하였다. 수신단의 optical decoder 앞에 fiber Bragg grating(FBG)을 사용하여 이 시스템의 주된 잡음인 phase-induced intensity noise(PIIN)를 대폭 줄여 향상된 시스템의 특성을 보일 수 있었다.

전자공학회논문지-SD•Jan 1, 2011•0 citations

An Iterative Soft-Decision Decoding Algorithm of Block Codes Using Reliability Values

Yong-Geol Shim

본 논문에서는 블록 부호의 반복적 연판정 복호 알고리즘을 제안하였다. 최초의 경판정 복호 결과에 대한 분석을 바탕으로 후보 부호어들을 효율적으로 탐색할 수 있는 방법을 개발하였다. 복호의 복잡도를 줄이고 에러 확률을 감소시키기 위하여 적은 갯수의 후보 부호어들을 선택한다. 이 때, 수신 신호로부터 가까운 거리에 존재하는 부호어가 포함되어 있을 확률이 크도록 후보 부호어들을 선택한다. 선택된 후보 부호어까지의 거리를 계산하여 가장 가까운 후보 부호어를 복호 결과로 선정한다. 제안된 방법에 의하여 신뢰도 값이 작은 비트들을 에러 패턴에 포함시키게 하는 후보 부호어를 탐색할 수 있으며, 이미 탐색된 후보 부호어가 다시 선정되는 경우를 방지할 수 있다. (23, 12) Golay 부호에 대하여 시뮬레이션을 수행하고 그 결과를 제시하였다. 복호의 복잡도가 현저히 감소되었고, 블록 에러 확률이 저하된 사실을 시뮬레이션 견과에서 확인한 수 있었다. An iterative soft-decision decoding algorithm of block codes is proposed. With careful examinations of the first hard-decision decoding result, the candidate codewords are efficiently searched for. An approach to reducing decoding complexity and lowering error probability is to select a small number of candidate codewords. With high probability, we include the codewords which are at the short distance from the received signal. The decoder then computes the distance to each of the candidate codewords and selects the codeword which is the closest. We can search for the candidate codewords which make the error patterns contain the bits with small reliability values. Also, we can reduce the cases that we select the same candidate codeword already searched for. Computer simulation results are presented for (23,12) Golay code. They show that decoding complexity is considerably reduced and the block error probability is lowered.

The KIPS Transactions PartC•Feb 1, 2004•0 citations

Performance Analysis of Optical CDMA System for the Presence of the Spectral Power Distortion in Broadband Light Source Considering Excess Noise

Park, Sang-Jo

과학과 문화•May 1, 2004•0 citations

Generating Metamorphic Test Cases using 2-qubit Quantum Gate Combinations

Woo-Yeob Hyun, Dongsu Kang

양자 컴퓨팅은 노이즈 민감성으로 인해 동일한 회로를 반복 실행하더라도 출력 확률 분포가 매번 달라질 수 있다. 본 연구는 이상적인 환경에서 동일한 출력 분포를 예상할 수 있는 2-큐비트 양자 게이트 조합을 메타모픽 테스트 케이스로 설계하고, Depolarizing, Amplitude Damping, Phase Damping 노이즈 모델을 적용하여 각 노이즈가 출력 확률 분포에 미치는 영향을 분석하였다. 실험 결과, 모든 노이즈 모델에서 노이즈가 0.01에 도달하자 p-value가 유의수준 이하로 떨어져 정의한 메타모픽 관계가 붕괴되었으며, KL-Divergence와 Cosine Similarity를 통해 예상 출력 분포와의 차이가 노이즈 강도에 따라 누적됨을 정량적으로 확인하였다. 메타모픽 테스팅 기법을 양자 게이트 조합에 적용할 때, 제안한 세 가지 지표를 활용하여 메타모픽 관계 판정 가능 여부를 확인하고 그 과정을 정량적으로 추적함으로써 양자 게이트 테스팅을 수행할 수 있다. 연구 결과는 양자 컴퓨팅 신뢰성 평가 및 노이즈 내성 회로 설계 등에 활용될 수 있으며, 다양한 양자 소프트웨어 테스팅 방법론으로 가능성을 제시한다.

Journal of the Korea Society of Computer and Information•May 31, 2026•0 citations

A novel construction method of QC-LDPC codes for optical com munications based on the BIBD and circulant decomposition

Yuan Jiangu

In order to meet the requirements of the high bit-rate and the lower bit error-rate of the errorcorrection code in optical communication systems,based on the balanced incomplete block design(BIBD) and the circulant decomposition in this paper,a novel construction method of quasi-cyclic low-density parity-check(QC-LDPC)codes with the advantage of the simple implementation is proposed.A regular BIBDdes-QC-LDPC(6736,6316)code suitable for optical communication systems is constructed by applying the proposed method.The simulation results show that at the bit error rate(BER)of 10-6 and the same code rate of 93.7%,the net coding gain(NCG)of the constructed BIBDdes-QC-LDPC(6736,6316)code is 2.2dB more than that of the classic RS(255,239)code which has been widely used in optical communication systems,and 0.2dB more than that of the BIBD-QC-LDPC(6736,6315)code with the same code length and the same code-rate constructed only by the BIBD method and that of the irregular QC-LDPC(3843,3603)code with the same code-rate based on Galois field multiplicative group.Therefore,the novel BIBDdes-QC-LDPC(6736,6316)code has superior error-correction performance and is more suitable for the high-speed long-haul optical communication systems.And the novel construction method still has the advantage of the BIBD method which can flexibly adjust the code length and code rate.

Journal of Optoelectronics·laser•Jan 1, 2013•1 citation
본 논문은 광원 라인폭이 Spectral Amplitude Coding (SAC) CDMA 시스템에 미치는 영향을 구하였다. q와 m값에 따라 다양한 코드를 구현할 수 있으므로 symmetric balance incomplete block design(BIBD) 코드를 분석에 사용하였다. 그 결과 입력파워가 큰 경우 (Psr =-10 dBm) 이상적인 BIBD 코드가 비이상적인 BIBD 코드보다 더 좁은 광원 라인폭이 요구되었다. 그러나 입력파워가 작은 경우 (Psr =-25 dBm)에는 그 반대로 비이상적인 BIBD 코드가 이상적인 BIBD 코드보다 더 좁은 광원 라인폭이 필요했다.
물리계층보안은 신호의 물리적 특성을 이용하여 정보를 보호하는 보안 기법이다. 현재 이에 대한 연구가 활발히 진행 중이지만 해결해야할 다음과 같은 문제점들이 존재한다. 도청자는 자신의 존재를 숨기기 위해서 자신의 채널상태정보를 다른 합법적인 노드와 공유하지는 않는다. 그리고 노드가 신호를 전송할 때 하드웨어 왜곡이 발생하지만 많은 연구들은 노드 모델들이 이상적인 것으로 가정을 하고, 하드웨어 왜곡문제를 고려하지 않고 있다. 이와 같은 문제점들을 해결하기 위한 본 논문의 주요한 특징 및 기여도는 다음과 같다. 첫째, 도청자의 채널상태정보를 얻기 위해서 조력자노드를 합법적인 노드주변에 설치하고, 조력자노드의 채널상태정보를 이용하여 노드모델에서 하드웨어 왜곡을 고려한다. 둘째, 제안된 시스템 모델의 인터셉트 확률에 대한 Closed-Form Expression을 제시한다. 제안된 시스템의 성능평가를 위해서 다양한 시뮬레이션를 통하여 제안된 시스템 모델의 물리계층보안에 미치는 영향을 알아본 결과, 불완전한 채널상태정보는 인터셉트 확률에는 영향을 미치지 못한 반면에, 불완전한 노드모델의 경우, 인터셉트 확률, 에르고딕 시크리스 용량과 보안채널용량에 영향을 준다는 것을 보여준다.
본 논문에서는 블록 부호의 반복적 연판정 복호 알고리즘을 제안하였다. 최초의 경판정 복호 결과에 대한 분석을 바탕으로 후보 부호어들을 효율적으로 탐색할 수 있는 방법을 개발하였다. 복호의 복잡도를 줄이고 에러 확률을 감소시키기 위하여 적은 갯수의 후보 부호어들을 선택한다. 이 때, 수신 신호로부터 가까운 거리에 존재하는 부호어가 포함되어 있을 확률이 크도록 후보 부호어들을 선택한다. 선택된 후보 부호어까지의 거리를 계산하여 가장 가까운 후보 부호어를 복호 결과로 선정한다. 제안된 방법에 의하여 신뢰도 값이 작은 비트들을 에러 패턴에 포함시키게 하는 후보 부호어를 탐색할 수 있으며, 이미 탐색된 후보 부호어가 다시 선정되는 경우를 방지할 수 있다. (23, 12) Golay 부호에 대하여 시뮬레이션을 수행하고 그 결과를 제시하였다. 복호의 복잡도가 현저히 감소되었고, 블록 에러 확률이 저하된 사실을 시뮬레이션 견과에서 확인한 수 있었다. An iterative soft-decision decoding algorithm of block codes is proposed. With careful examinations of the first hard-decision decoding result, the candidate codewords are efficiently searched for. An approach to reducing decoding complexity and lowering error probability is to select a small number of candidate codewords. With high probability, we include the codewords which are at the short distance from the received signal. The decoder then computes the distance to each of the candidate codewords and selects the codeword which is the closest. We can search for the candidate codewords which make the error patterns contain the bits with small reliability values. Also, we can reduce the cases that we select the same candidate codeword already searched for. Computer simulation results are presented for (23,12) Golay code. They show that decoding complexity is considerably reduced and the block error probability is lowered.
양자 컴퓨팅은 노이즈 민감성으로 인해 동일한 회로를 반복 실행하더라도 출력 확률 분포가 매번 달라질 수 있다. 본 연구는 이상적인 환경에서 동일한 출력 분포를 예상할 수 있는 2-큐비트 양자 게이트 조합을 메타모픽 테스트 케이스로 설계하고, Depolarizing, Amplitude Damping, Phase Damping 노이즈 모델을 적용하여 각 노이즈가 출력 확률 분포에 미치는 영향을 분석하였다. 실험 결과, 모든 노이즈 모델에서 노이즈가 0.01에 도달하자 p-value가 유의수준 이하로 떨어져 정의한 메타모픽 관계가 붕괴되었으며, KL-Divergence와 Cosine Similarity를 통해 예상 출력 분포와의 차이가 노이즈 강도에 따라 누적됨을 정량적으로 확인하였다. 메타모픽 테스팅 기법을 양자 게이트 조합에 적용할 때, 제안한 세 가지 지표를 활용하여 메타모픽 관계 판정 가능 여부를 확인하고 그 과정을 정량적으로 추적함으로써 양자 게이트 테스팅을 수행할 수 있다. 연구 결과는 양자 컴퓨팅 신뢰성 평가 및 노이즈 내성 회로 설계 등에 활용될 수 있으며, 다양한 양자 소프트웨어 테스팅 방법론으로 가능성을 제시한다.
In order to meet the requirements of the high bit-rate and the lower bit error-rate of the errorcorrection code in optical communication systems,based on the balanced incomplete block design(BIBD) and the circulant decomposition in this paper,a novel construction method of quasi-cyclic low-density parity-check(QC-LDPC)codes with the advantage of the simple implementation is proposed.A regular BIBDdes-QC-LDPC(6736,6316)code suitable for optical communication systems is constructed by applying the proposed method.The simulation results show that at the bit error rate(BER)of 10-6 and the same code rate of 93.7%,the net coding gain(NCG)of the constructed BIBDdes-QC-LDPC(6736,6316)code is 2.2dB more than that of the classic RS(255,239)code which has been widely used in optical communication systems,and 0.2dB more than that of the BIBD-QC-LDPC(6736,6315)code with the same code length and the same code-rate constructed only by the BIBD method and that of the irregular QC-LDPC(3843,3603)code with the same code-rate based on Galois field multiplicative group.Therefore,the novel BIBDdes-QC-LDPC(6736,6316)code has superior error-correction performance and is more suitable for the high-speed long-haul optical communication systems.And the novel construction method still has the advantage of the BIBD method which can flexibly adjust the code length and code rate.