Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Iranian Conference on Electrical Engineering

Comparison of optical bistability of photonic crystal microring resonator switch with different input signal

Tahereh Ahmadi Tameh, Nosrat Granpayeh, Babak Memarzadeh Isfahani, A. R. Maleki Javan

Published May 1, 2010• 0 citations
Publisher

Abstract

In this paper, a structure of nonlinear photonic crystal microring resonator (PC-MRR) has been analyzed by the finite-difference time-domain (FDTD) method and its optical bistability for different input signals have been derived. It has been shown that bistability threshold of PC-MRR is related to the speed of variation of input signal.
DOI
10.1109/iraniancee.2010.5507103

Related papers

Bistability of Nonlinear Photonic Crystal Microring Resonators

Tahereh Ahmadi Tameh, Babak Memarzadeh Isfahani, Nosrat Granpayeh +1 more

In this paper, two structures of nonlinear photonic crystal microring resonator have been analyzed by the flnite-difierence time-domain method and their optical bistability curves have been derived. In a modifled structure, by increasing the interaction of the lightwave and material, the optical bistability threshold is decreased to one third of that of flrst structure.

•Jan 1, 2009•3 citations

Optical bistability in mobius microring resonator

Ahmad Fakhrurrazi Ahmad Noorden, Ahmad Fakhrurrazi

Optical bistability is one of the nonlinear properties that produce an essential light control which contributes in various photonics applications such as all-optical switching and optical memory. In this thesis, bistability behavior of optical signals generated in microring resonator (MRR) systems using bright soliton input pulses with 1.55 µm wavelength is studied. The generation of the bistable signals is mathematically analyzed through the transfer matrix analysis and simulated by the MATLAB software version 2014a. The behavior of the propagated input pulses in terms of intensity and phase shift is investigated for different configurations including All-pass MRR, Add-drop MRR and PANDA MRR systems. Three novel Mobius MRR configurations consist of All-pass Mobius MRR, Add-drop Mobius MRR and PANDA Mobius MRR configurations are proposed and the light treatment through Mobius MRR systems is analytically studied and compared with conventional MRR systems. For determining the effect of physical parameters such as ring radius, control power variation and coupling coefficients on the output pulse, the optical hysteresis loops of bistable signals are generated via silicon-on-insulator nonlinear MRR configurations. The analyses of the results are conducted by calculating the output switching power, input threshold power and hysteresis width of bistable loop for radius variation from 1 µm to 6 µm with an increment of 1 µm, change of coupling coefficient from 0.4 to 0.9 with increment of 0.1 and variation of controlled power from 50 mW to 100 mW with increment of 10 mW. It is found that small coupling coefficients enhance the hysteresis width and output switching power of optical bistable loops. The value of output switching power obtained at the output port of Add-drop Mobius MRR is 30.26 mW which is higher than those obtained from All-pass Mobius and PANDA Mobius MRR configurations. The threshold powers of the All-pass Mobius, Add-drop Mobius and PANDA Mobius configurations for on switching operations are obtained as 20.59 mW, 31.39 mW and 25.19 mW respectively. It is found that, optimization of the Mobius MRR system can be conducted by increasing the external radius of Mobius ring waveguide and decreasing the coupling coefficient with implementation of the high control power. In this work, the Mobius configurations are introduced as a convenient compact design to generate optical bistability in comparison with conventional configurations of nonlinear MRR system.

•May 1, 2015•0 citations

Optical Bistability Investigation in a Nonlinear Silicon Microring Circuit

Surasak Chiangga, Santhad Pitakwongsaporn, T.D. Frank +1 more

We describe the optical bistability phenomenon in a silicon-on-insulator microring resonators device by using an analytical theory, which includes both linear and nonlinear effects such as two-photon absorption, Kerr effect, free carrier and thermo-optic effect (TOE). We show that the bistable switching threshold and the hysteresis loop width can be tuned by geometrical parameters of the device and by the nonlinear parameters. The accuracy of the analytical approach is verified by comparing the spectrum responds with the predicting data from a commercial finite-difference time-domain software tool, and a very close agreement is found between the two when TOE is incorporated in analytical theory. In addition, our analysis reveals that a new type of hysteresis loop occurs at low input intensity. The mode suppression of the designed device by Vernier effect for tunable filter applications is also briefly discussed.

Journal of Lightwave Technology•Jan 30, 2013•13 citations

Characterization of Optical Bi-Stability in Active Silicon Microring Resonators for All-Optical Switching

Abdou Eltamimy Shetewy, Mircea Traian Catuneanu, Menglong He +1 more

In this work, we experimentally study the optical bistability (BI) behavior in active silicon microring resonators (MRR). A stable hysteresis loop response at the output port is demonstrated at a power level higher than the BI threshold, taking into account the different detuning and free carrier life-times. That hysteresis is observed at low and high BI thresholds, which can be used for all-optical switching and optical routers. The MRR is placed inside a reverse-biased PIN junction and fabricated by CMOS technology. It records a loaded Q-factor, linewidth (3 dB width of the spectrum), and extinction ratio (ER) around$10^{5},15.3$pm, and 20 dB, respectively.

OptoElectronics and Communications Conference and International Conference on Photonics in Switching and Computing (OECC/PSC)•Sep 26, 2023•5 citations

OPTICAL BISTABILITY CONTROLLED USING ADD-DROP MOBIUS MICRORING RESONATOR SYSTEM

Ahmad Fakhrurrazi Ahmad Noorden, Suzairi Daud, Zuhaib Haider +2 more

The theoretical investigation has been performed on the implementation of optical Mobius shape in add-drop microring resonator. The modified add-drop Mobius configuration is used to investigate the optical bistability and the spectral transmission. The optical bright soliton pulse is used as the input source of the resonator system. The pulses propagation of the resonator system is modelled using the iterative programming based on the transfer matrix analysis equations. The enhancement of nonlinear effect of the resonator system is achieved by the add-drop Mobius resonator configuration. The system has been modelled for a variation of coupling coefficient for increase the bistable signal properties. The Add-drop Mobius MRR generated a bistable signal with 6.01 mW hysteresis width, and 9.47 mW output switch power with optimized radius of 5 µm outer and 4.5 m inner ring parts with 50 mW controlled power and input power. Mobius configuration is found as the better shape of resonator cavity that capable of optical switching application.

Jurnal Teknologi•Feb 21, 2016•0 citations

Finite-Difference Time-Domain Analysis on Nonlinear Fabry-Perot Resonator in Optical Waveguide Geometry

Masamitsu Fujii, Toshihiro Okamoto Toshihiro Okamoto, Masanobu Haraguchi +2 more

The finite-difference time-domain (FDTD) method is applied to investigate the characteristics of nonlinear Fabry-Perot (FP) resonators in optical waveguide geometries. Our treatment, which is the extension of Tran's method developed to analyse the characteristics of nonlinear photonic crystals, correctly reproduces analytical results on optical bistabilities of the FP resonator provided by Chen and Mills in 1987. It is found that the minimum power required for optical bistabilities is significantry decreased by adopting the optical waveguide geometry, compared with the case of Chen and Mills, i.e., a conventional nonlinear FP interferometer.

Japanese Journal of Applied Physics•Apr 1, 2001•2 citations
Optical bistability is one of the nonlinear properties that produce an essential light control which contributes in various photonics applications such as all-optical switching and optical memory. In this thesis, bistability behavior of optical signals generated in microring resonator (MRR) systems using bright soliton input pulses with 1.55 µm wavelength is studied. The generation of the bistable signals is mathematically analyzed through the transfer matrix analysis and simulated by the MATLAB software version 2014a. The behavior of the propagated input pulses in terms of intensity and phase shift is investigated for different configurations including All-pass MRR, Add-drop MRR and PANDA MRR systems. Three novel Mobius MRR configurations consist of All-pass Mobius MRR, Add-drop Mobius MRR and PANDA Mobius MRR configurations are proposed and the light treatment through Mobius MRR systems is analytically studied and compared with conventional MRR systems. For determining the effect of physical parameters such as ring radius, control power variation and coupling coefficients on the output pulse, the optical hysteresis loops of bistable signals are generated via silicon-on-insulator nonlinear MRR configurations. The analyses of the results are conducted by calculating the output switching power, input threshold power and hysteresis width of bistable loop for radius variation from 1 µm to 6 µm with an increment of 1 µm, change of coupling coefficient from 0.4 to 0.9 with increment of 0.1 and variation of controlled power from 50 mW to 100 mW with increment of 10 mW. It is found that small coupling coefficients enhance the hysteresis width and output switching power of optical bistable loops. The value of output switching power obtained at the output port of Add-drop Mobius MRR is 30.26 mW which is higher than those obtained from All-pass Mobius and PANDA Mobius MRR configurations. The threshold powers of the All-pass Mobius, Add-drop Mobius and PANDA Mobius configurations for on switching operations are obtained as 20.59 mW, 31.39 mW and 25.19 mW respectively. It is found that, optimization of the Mobius MRR system can be conducted by increasing the external radius of Mobius ring waveguide and decreasing the coupling coefficient with implementation of the high control power. In this work, the Mobius configurations are introduced as a convenient compact design to generate optical bistability in comparison with conventional configurations of nonlinear MRR system.
We describe the optical bistability phenomenon in a silicon-on-insulator microring resonators device by using an analytical theory, which includes both linear and nonlinear effects such as two-photon absorption, Kerr effect, free carrier and thermo-optic effect (TOE). We show that the bistable switching threshold and the hysteresis loop width can be tuned by geometrical parameters of the device and by the nonlinear parameters. The accuracy of the analytical approach is verified by comparing the spectrum responds with the predicting data from a commercial finite-difference time-domain software tool, and a very close agreement is found between the two when TOE is incorporated in analytical theory. In addition, our analysis reveals that a new type of hysteresis loop occurs at low input intensity. The mode suppression of the designed device by Vernier effect for tunable filter applications is also briefly discussed.
In this work, we experimentally study the optical bistability (BI) behavior in active silicon microring resonators (MRR). A stable hysteresis loop response at the output port is demonstrated at a power level higher than the BI threshold, taking into account the different detuning and free carrier life-times. That hysteresis is observed at low and high BI thresholds, which can be used for all-optical switching and optical routers. The MRR is placed inside a reverse-biased PIN junction and fabricated by CMOS technology. It records a loaded Q-factor, linewidth (3 dB width of the spectrum), and extinction ratio (ER) around105,15.310^{5},15.3105,15.3pm, and 20 dB, respectively.
The theoretical investigation has been performed on the implementation of optical Mobius shape in add-drop microring resonator. The modified add-drop Mobius configuration is used to investigate the optical bistability and the spectral transmission. The optical bright soliton pulse is used as the input source of the resonator system. The pulses propagation of the resonator system is modelled using the iterative programming based on the transfer matrix analysis equations. The enhancement of nonlinear effect of the resonator system is achieved by the add-drop Mobius resonator configuration. The system has been modelled for a variation of coupling coefficient for increase the bistable signal properties. The Add-drop Mobius MRR generated a bistable signal with 6.01 mW hysteresis width, and 9.47 mW output switch power with optimized radius of 5 µm outer and 4.5 m inner ring parts with 50 mW controlled power and input power. Mobius configuration is found as the better shape of resonator cavity that capable of optical switching application.
The finite-difference time-domain (FDTD) method is applied to investigate the characteristics of nonlinear Fabry-Perot (FP) resonators in optical waveguide geometries. Our treatment, which is the extension of Tran's method developed to analyse the characteristics of nonlinear photonic crystals, correctly reproduces analytical results on optical bistabilities of the FP resonator provided by Chen and Mills in 1987. It is found that the minimum power required for optical bistabilities is significantry decreased by adopting the optical waveguide geometry, compared with the case of Chen and Mills, i.e., a conventional nonlinear FP interferometer.