Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

OptoElectronics and Communications Conference and International Conference on Photonics in Switching and Computing (OECC/PSC)

Characterization of Optical Bi-Stability in Active Silicon Microring Resonators for All-Optical Switching

Abdou Eltamimy Shetewy, Mircea Traian Catuneanu, Menglong He, Kambiz Jamshidi

Published Sep 26, 2023• 5 citations
Publisher

Abstract

In this work, we experimentally study the optical bistability (BI) behavior in active silicon microring resonators (MRR). A stable hysteresis loop response at the output port is demonstrated at a power level higher than the BI threshold, taking into account the different detuning and free carrier life-times. That hysteresis is observed at low and high BI thresholds, which can be used for all-optical switching and optical routers. The MRR is placed inside a reverse-biased PIN junction and fabricated by CMOS technology. It records a loaded Q-factor, linewidth (3 dB width of the spectrum), and extinction ratio (ER) around$10^{5},15.3$pm, and 20 dB, respectively.

DOI
10.1109/psc57974.2023.10297273

Related papers

Optical Bistability Investigation in a Nonlinear Silicon Microring Circuit

Surasak Chiangga, Santhad Pitakwongsaporn, T.D. Frank +1 more

We describe the optical bistability phenomenon in a silicon-on-insulator microring resonators device by using an analytical theory, which includes both linear and nonlinear effects such as two-photon absorption, Kerr effect, free carrier and thermo-optic effect (TOE). We show that the bistable switching threshold and the hysteresis loop width can be tuned by geometrical parameters of the device and by the nonlinear parameters. The accuracy of the analytical approach is verified by comparing the spectrum responds with the predicting data from a commercial finite-difference time-domain software tool, and a very close agreement is found between the two when TOE is incorporated in analytical theory. In addition, our analysis reveals that a new type of hysteresis loop occurs at low input intensity. The mode suppression of the designed device by Vernier effect for tunable filter applications is also briefly discussed.

Journal of Lightwave Technology•Jan 30, 2013•13 citations

Optical bistability in mobius microring resonator

Ahmad Fakhrurrazi Ahmad Noorden, Ahmad Fakhrurrazi

Optical bistability is one of the nonlinear properties that produce an essential light control which contributes in various photonics applications such as all-optical switching and optical memory. In this thesis, bistability behavior of optical signals generated in microring resonator (MRR) systems using bright soliton input pulses with 1.55 µm wavelength is studied. The generation of the bistable signals is mathematically analyzed through the transfer matrix analysis and simulated by the MATLAB software version 2014a. The behavior of the propagated input pulses in terms of intensity and phase shift is investigated for different configurations including All-pass MRR, Add-drop MRR and PANDA MRR systems. Three novel Mobius MRR configurations consist of All-pass Mobius MRR, Add-drop Mobius MRR and PANDA Mobius MRR configurations are proposed and the light treatment through Mobius MRR systems is analytically studied and compared with conventional MRR systems. For determining the effect of physical parameters such as ring radius, control power variation and coupling coefficients on the output pulse, the optical hysteresis loops of bistable signals are generated via silicon-on-insulator nonlinear MRR configurations. The analyses of the results are conducted by calculating the output switching power, input threshold power and hysteresis width of bistable loop for radius variation from 1 µm to 6 µm with an increment of 1 µm, change of coupling coefficient from 0.4 to 0.9 with increment of 0.1 and variation of controlled power from 50 mW to 100 mW with increment of 10 mW. It is found that small coupling coefficients enhance the hysteresis width and output switching power of optical bistable loops. The value of output switching power obtained at the output port of Add-drop Mobius MRR is 30.26 mW which is higher than those obtained from All-pass Mobius and PANDA Mobius MRR configurations. The threshold powers of the All-pass Mobius, Add-drop Mobius and PANDA Mobius configurations for on switching operations are obtained as 20.59 mW, 31.39 mW and 25.19 mW respectively. It is found that, optimization of the Mobius MRR system can be conducted by increasing the external radius of Mobius ring waveguide and decreasing the coupling coefficient with implementation of the high control power. In this work, the Mobius configurations are introduced as a convenient compact design to generate optical bistability in comparison with conventional configurations of nonlinear MRR system.

•May 1, 2015•0 citations

Multibistability and self-pulsation in nonlinear high- Q silicon microring resonators considering thermo-optical effect

Libin Zhang, Yonghao Fei, Tongtong Cao +3 more

Optical bistability (BI) and self-pulsation (SP) in high-$Q$ silicon microring resonators (MRRs) induced by thermo-optical (TO) effect and other nonlinear effects are theoretically studied with coupled mode theory and linear stability analysis method. It is found that the boundaries for both BI and SP are mainly restricted by two counteracting effects: free carrier dispersion effect and TO effect. If the refractive index changes of a MRR caused by these two effects are on the same order of magnitude, the output power will exhibit much more complicated dependence on the input power and wavelength, namely, input-power-dependent multi-BI and multi-SP regions will exist at certain input wavelength range. The controllability of multi-BI and multi-SP phenomena by the input power and input wavelength could be very useful in all-optical nonlinear devices.

Physical Review A•May 6, 2013•61 citations

Bistability and all-optical flip–flop with active microring resonator

Qiliang Li, Hongliang Yuan, Xianghong Tang

In this work, we study the bistability of an active nonlinear microring resonator and design a flip-flop based on the active microring resonator. In the presence of nonlinear and linear loss, we use Er-doped gain medium in the microring to obtain gain to compensate for the loss of the resonator. Both analytical and numerical methods are used to solve the propagation in the microring with double couplers, and we obtain the hysteresis loops of the microring. The results obtained by the two methods reveal that, in the presence of nonlinearity in microring resonators, the system exhibits bistability, and the gain in the microring leads to a decrease of the bias power when the active microring is taken as a bistable switcher. Basing on the bistability of the microring, we realize a set-reset flip-flop by adding a positive or negative feedback onto the bias. We also find that the duration of the set and reset pulses must exceed the field buildup time of the microring if we want to achieve the switching of the bias signal. In our design, the duration time is about 2 ps.

Applied Optics•May 6, 2014•6 citations

Optical multi-stability in a nonlinear high-order microring resonator filter

Jin Li, Luigi Di Lauro, Alessia Pasquazi +5 more

We theoretically analyze and experimentally demonstrate optical bi-stability and multi-stability in an integrated nonlinear high-order microring resonator filter based on high-index contrast doped silica glass. We use a nonlinear model accounting for both the Kerr and thermal effects to analyze the instability behavior of the coupled-resonator based filter. The model also accurately predicts the multi-stable behavior of the filter when the input frequency is slightly detuned. To understand the role of the intracavity power distribution, we investigate the detuning of the individual rings of the filter from the optical response with a pump–probe experiment. Such a measurement is performed scanning the filter with a low-power probe beam tuned a few free spectral ranges away from the resonance where the pump is coupled. A comprehensive understanding of the relationship between the nonlinear behavior and the intracavity power distribution for the high-order microring resonator filter will help the design and implementation of future all-optical switching systems using this type of filter.

APL Photonics•May 1, 2020•58 citations

OPTICAL BISTABILITY IN ALL-PASS MOBIUS CONFIGURATION MICRORING RESONATOR

Ahmad Fakhrurrazi Ahmad Noorden, Mahdi Bahadoran, Kashif Tufail Chaudhary +4 more

A novel design of microring resonator called all-pass Mobius ring resonator is used to study optical bistability effect and spectral transmission for all-optical switching application with clockwise hysteresis loop operation. The bright soliton pulse is applied as the input source of the system. The propagation of the pulses within the system is simulated using the transfer matrix analysis. The all-pass Mobius ring resonator is able to operate under high nonlinearity as it has longer propagation length per roundtrip. The all-pass Mobius provides low transmission peak power of 3.65 mW as compared to the conventional all-pass configuration. The output-to-input relation of both design shows that the Mobius configuration is able to generate a higher hysteresis loop width of the bistable signal from 15.79 mW to 18.10 mW input power. The switching power of the optical bistability in Mobius configuration is 3.67 mW for threshold power of 16.95mW. This work shows the Mobius configuration is more suitable to be used for all-optical switching application as compared to the conventional all-pass ring resonator configuration.

Jurnal Teknologi•Oct 13, 2015•4 citations
In this work, we experimentally study the optical bistability (BI) behavior in active silicon microring resonators (MRR). A stable hysteresis loop response at the output port is demonstrated at a power level higher than the BI threshold, taking into account the different detuning and free carrier life-times. That hysteresis is observed at low and high BI thresholds, which can be used for all-optical switching and optical routers. The MRR is placed inside a reverse-biased PIN junction and fabricated by CMOS technology. It records a loaded Q-factor, linewidth (3 dB width of the spectrum), and extinction ratio (ER) around105,15.310^{5},15.3105,15.3pm, and 20 dB, respectively.
We describe the optical bistability phenomenon in a silicon-on-insulator microring resonators device by using an analytical theory, which includes both linear and nonlinear effects such as two-photon absorption, Kerr effect, free carrier and thermo-optic effect (TOE). We show that the bistable switching threshold and the hysteresis loop width can be tuned by geometrical parameters of the device and by the nonlinear parameters. The accuracy of the analytical approach is verified by comparing the spectrum responds with the predicting data from a commercial finite-difference time-domain software tool, and a very close agreement is found between the two when TOE is incorporated in analytical theory. In addition, our analysis reveals that a new type of hysteresis loop occurs at low input intensity. The mode suppression of the designed device by Vernier effect for tunable filter applications is also briefly discussed.
Optical bistability is one of the nonlinear properties that produce an essential light control which contributes in various photonics applications such as all-optical switching and optical memory. In this thesis, bistability behavior of optical signals generated in microring resonator (MRR) systems using bright soliton input pulses with 1.55 µm wavelength is studied. The generation of the bistable signals is mathematically analyzed through the transfer matrix analysis and simulated by the MATLAB software version 2014a. The behavior of the propagated input pulses in terms of intensity and phase shift is investigated for different configurations including All-pass MRR, Add-drop MRR and PANDA MRR systems. Three novel Mobius MRR configurations consist of All-pass Mobius MRR, Add-drop Mobius MRR and PANDA Mobius MRR configurations are proposed and the light treatment through Mobius MRR systems is analytically studied and compared with conventional MRR systems. For determining the effect of physical parameters such as ring radius, control power variation and coupling coefficients on the output pulse, the optical hysteresis loops of bistable signals are generated via silicon-on-insulator nonlinear MRR configurations. The analyses of the results are conducted by calculating the output switching power, input threshold power and hysteresis width of bistable loop for radius variation from 1 µm to 6 µm with an increment of 1 µm, change of coupling coefficient from 0.4 to 0.9 with increment of 0.1 and variation of controlled power from 50 mW to 100 mW with increment of 10 mW. It is found that small coupling coefficients enhance the hysteresis width and output switching power of optical bistable loops. The value of output switching power obtained at the output port of Add-drop Mobius MRR is 30.26 mW which is higher than those obtained from All-pass Mobius and PANDA Mobius MRR configurations. The threshold powers of the All-pass Mobius, Add-drop Mobius and PANDA Mobius configurations for on switching operations are obtained as 20.59 mW, 31.39 mW and 25.19 mW respectively. It is found that, optimization of the Mobius MRR system can be conducted by increasing the external radius of Mobius ring waveguide and decreasing the coupling coefficient with implementation of the high control power. In this work, the Mobius configurations are introduced as a convenient compact design to generate optical bistability in comparison with conventional configurations of nonlinear MRR system.
Optical bistability (BI) and self-pulsation (SP) in high-QQQ silicon microring resonators (MRRs) induced by thermo-optical (TO) effect and other nonlinear effects are theoretically studied with coupled mode theory and linear stability analysis method. It is found that the boundaries for both BI and SP are mainly restricted by two counteracting effects: free carrier dispersion effect and TO effect. If the refractive index changes of a MRR caused by these two effects are on the same order of magnitude, the output power will exhibit much more complicated dependence on the input power and wavelength, namely, input-power-dependent multi-BI and multi-SP regions will exist at certain input wavelength range. The controllability of multi-BI and multi-SP phenomena by the input power and input wavelength could be very useful in all-optical nonlinear devices.
In this work, we study the bistability of an active nonlinear microring resonator and design a flip-flop based on the active microring resonator. In the presence of nonlinear and linear loss, we use Er-doped gain medium in the microring to obtain gain to compensate for the loss of the resonator. Both analytical and numerical methods are used to solve the propagation in the microring with double couplers, and we obtain the hysteresis loops of the microring. The results obtained by the two methods reveal that, in the presence of nonlinearity in microring resonators, the system exhibits bistability, and the gain in the microring leads to a decrease of the bias power when the active microring is taken as a bistable switcher. Basing on the bistability of the microring, we realize a set-reset flip-flop by adding a positive or negative feedback onto the bias. We also find that the duration of the set and reset pulses must exceed the field buildup time of the microring if we want to achieve the switching of the bias signal. In our design, the duration time is about 2 ps.
We theoretically analyze and experimentally demonstrate optical bi-stability and multi-stability in an integrated nonlinear high-order microring resonator filter based on high-index contrast doped silica glass. We use a nonlinear model accounting for both the Kerr and thermal effects to analyze the instability behavior of the coupled-resonator based filter. The model also accurately predicts the multi-stable behavior of the filter when the input frequency is slightly detuned. To understand the role of the intracavity power distribution, we investigate the detuning of the individual rings of the filter from the optical response with a pump–probe experiment. Such a measurement is performed scanning the filter with a low-power probe beam tuned a few free spectral ranges away from the resonance where the pump is coupled. A comprehensive understanding of the relationship between the nonlinear behavior and the intracavity power distribution for the high-order microring resonator filter will help the design and implementation of future all-optical switching systems using this type of filter.
A novel design of microring resonator called all-pass Mobius ring resonator is used to study optical bistability effect and spectral transmission for all-optical switching application with clockwise hysteresis loop operation. The bright soliton pulse is applied as the input source of the system. The propagation of the pulses within the system is simulated using the transfer matrix analysis. The all-pass Mobius ring resonator is able to operate under high nonlinearity as it has longer propagation length per roundtrip. The all-pass Mobius provides low transmission peak power of 3.65 mW as compared to the conventional all-pass configuration. The output-to-input relation of both design shows that the Mobius configuration is able to generate a higher hysteresis loop width of the bistable signal from 15.79 mW to 18.10 mW input power. The switching power of the optical bistability in Mobius configuration is 3.67 mW for threshold power of 16.95mW. This work shows the Mobius configuration is more suitable to be used for all-optical switching application as compared to the conventional all-pass ring resonator configuration.