Kluwer Academic Publishers eBooks

Generating And Manipulating Atom Laser Beams

Tilman Esslinger, Immanuel Bloch, Markus Greiner, Theodor W. Hänsch

Published Dec 11, 2005• 1 citation

Abstract

New levels of control over the atomic motion have been attained through the development of the atom laser. The unique properties of these coherent atomic sources open up a wide range of new possibilities in the fields of atom optics and precision measurement. In this article we have discussed the high contrast interference pattern obtained from an atom laser with two output modes of different energies. It should be possible to create a highly complex interference pattern in the output beam of an atom laser by applying a correspondingly tailored radio wave field for output coupling. A novel atom optical manipulation method allowed us to reflect, recapture and focus an atom laser beam. Due to its simplicity and precision the technique is ideally suited for creating an interferometer for the atom laser beam. It seems feasible to split the atom laser beam into two components and recombine it after delaying one of the two components. The resulting interference pattern would reveal the coherence properties of the atom laser beam.

DOI: 10.1007/0-306-47103-5_8

Related papers

Pumping an atom laser

G. R. Dennis

Measurement is our fundamental tool for learning about the world around us. It is from observing trends in measurements that we develop the theories that enable us to predict future behaviour, and it is against measurements that we determine the validity of these theories. Increases in the precision of our measurements are fundamental to our understanding. Atom interferometry is a new method for performing precision measurements that uses the matter-wave nature of atoms to perform interferometry experiments analogous to those performed with photons. However, in contrast to optical interferometry, which uses coherent sources of photons, atom interferometry uses thermal atomic sources, in part due to the unavailability of high-flux coherent atomic sources. Although pulsed coherent atomic sources are presently available, continuous sources are not. Creating a truly continuous coherent source for atoms is tricker than for photons. One of the largest challenges is that atom number is conserved. A source of atoms is therefore necessary to produce a truly continuous atom laser. This source must be used to replenish the lasing mode of the atom laser, and the process must operate without significantly disturbing the coherence properties of the lasing mode. It is this replenishment or pumping process that has been investigated theoretically in this thesis. There are only two choices for the reservoir that makes the replenishment (or pumping) process of an atom laser irreversible: the empty modes of the optical field, and the empty modes of the atomic field. Processes of both forms are considered. Using an optical reservoir has the advantage that atoms are not necessarily lost as part of the pumping process, which is necessary when using an atomic reservoir. The efficiency of processes using an optical reservoir can therefore be higher. Using an atomic reservoir, however, has the advantage that it is easier to implement as one can use the standard experimental technique of evaporation which is commonly used in the production of pulsed coherent atomic sources. We show theoretically in this thesis that although it is possible to produce a continuous atom laser using an atomic reservoir, the flux achieved in the geometry considered is insufficient to compete with pulsed coherent atomic sources for precision measurement. The results for the pumping process using an optical reservoir are more promising. Although condensed sources were used as the source for this process, a detailed comparison of the theoretical calculations and experimental results indicate that the detrimental reabsorption processes are suppressed. This suggests that it may be possible to use higher-flux thermal atomic sources to replenish the lasing mode of an atom laser with this pumping process.

Jan 1, 20101 citation

Atom optics: matter and waves in harmony

W. L. Power

Our ability to manipulate the coherence properties of light has been at the heart of many of the most important scientific and technological innovations of this century. There can hardly be a home in this country that does not possess a laser in the form of a compact disc player or a CDROM. When we talk on the phone, or send messages on the Internet, there is a high probability that our message will be encoded by a laser into pulses of light to be passed through optical fibres. In the last few years physicists have been discovering that it is possible to control the coherence properties of atoms, and are now developing tools analogous to those which have been developed to take advantage of the coherence properties of light. In the next decade we can look forward to seeing the application of lasers, fibres, mirrors and waveguides for atoms. Already we have been able to construct interferometry experiments using beams of atoms and these have proved to be extremely sensitive measurement devices, allowing us to test physical theories and measure fundamental constants to a level of precision not previously possible. Will these developing technologies ever be as ubiquitous as their optical forebears? In this paper we discuss the anticipated uses of this technology for both fundamental science and industrial applications. Starting from an explanation of the meaning of coherence and a comparison of the properties of photons and atoms, we describe the development of the science of atom optics. The tortuous route towards the great achievement of producing a Bose–Einstein condensate is described, and we explain why this is the most important step towards a laser–like source of atoms. Numerous other optical elements for atoms have been built or are on the drawing board, and we describe how these may be used to manipulate atoms with a precision that has never before been achieved, and look ahead to what we can learn about physics using these tools and at how they can be put to practical use.

Philosophical Transactions of the Royal Society A Mathematical Physical and Engineering SciencesJan 15, 20002 citations

Three-beam atom interferometer

H. Hinderthür, Andreas Pautz, V. Rieger +4 more

We present an atom interferometer based on the interference of three partial matter waves in three different internal and external states. Coherent laser excitation acts as a beamsplitter to create a superposition state of the ground state and two Zeeman sublevels of the metastable state of magnesium atoms. The interference pattern of the output ports shows high contrast and the characteristics of three-beam interferences as known from optical interferometry. In comparison to two-beam interferometry a reduction of the fringe width of (32\ifmmode\pm\else\textpm\fi{}8)% is observed. This offers various possibilities for improved measurements of quantum-mechanical phases due to the internal atomic-state sensitive coupling of external potentials. This is demonstrated for the interaction of magnesium atoms with an external magnetic field.

Physical Review ASep 1, 199722 citations

An Atom Laser over Optical Lasers

Arbind Kumar Sah

An atom laser is a coherent state of propagating atoms. They are created out of a Bose Einstein Condensation (BEC) of atoms which are output coupled using various techniques. An optical laser or conventional laser generates a coherent beam of light waves where as an atom laser produces a coherent beam of matter waves. An atom laser will have a major impact on the fields of atom optics, atom lithography and precision measurements.The Himalayan Physics Vol. 4, No. 4, 2013 Page: 99-101 Uploaded date: 12/23/2013

Himalayan PhysicsDec 23, 20130 citations

Atom-Light Hybrid Interferometer

Bing Chen, Cheng Qiu, Shuying Chen +4 more

A new type of hybrid atom-light interferometer is demonstrated with atomic Raman amplification processes replacing the beam splitting elements in a traditional interferometer. This nonconventional interferometer involves correlated optical and atomic waves in the two arms. The correlation between atoms and light developed with the Raman process makes this interferometer different from conventional interferometers with linear beam splitters. It is observed that the high-contrast interference fringes are sensitive to the optical phase via a path change as well as the atomic phase via a magnetic field change. This new atom-light correlated hybrid interferometer is a sensitive probe of the atomic internal state and should find wide applications in precision measurement and quantum control with atoms and photons.

Physical Review LettersJul 24, 2015112 citations

Atom lasers: production, properties and prospects for precision inertial measurement

Nicholas P. Robins, P. A. Altin, J. E. Debs +1 more

We review experimental progress on atom lasers out-coupled from Bose-Einstein condensates, and consider the prop-erties of such beams in the context of precision inertial sensing. The atom laser is the matter-wave analog of the optical laser. Both devices rely on Bose-enhanced scattering to produce a macroscopically populated trapped mode that is output-coupled to produce an intense beam. In both cases, the beams often display highly desirable properties such as low divergence, high spectral flux and a simple spatial mode that make them useful in practical applications, as well as the potential to perform measurements at or below the quantum projection noise limit. Both devices display similar second-order correlations that differ from thermal sources. Because of these properties, atom lasers are a promising source for application to precision inertial measurements.

Aug 17, 201690 citations