Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE Transactions on Applied Superconductivity

Design Approach of Dynamically Reconfigurable Single Flux Quantum Logic Gates

Yuki Yamanashi, 一朗 大河, Nobuyuki Yoshikawa

Published Dec 14, 2010• 11 citations
Publisher

Abstract

Novel reconfigurable superconductive single flux quantum (SFQ) logic devices, the functions of which can be dynamically reconfigured by inputting control signals, have been investigated. The characteristics of single flux quantum circuits can be easily modulated by applying currents or magnetic fields because of the high sensitivity of superconductive circuits. We investigated several design approaches for the realization of dynamically reconfigurable SFQ logic devices. We employed direct current injection to the logic gate using a non-destructive read-out flip-flop. By changing the internal state of the non-destructive read-out flip-flop, the logic function can be dynamically reconfigured. We have designed and tested a dynamically reconfigurable Josephson transmission line (JTL)/delay flip-flop (DFF) circuit. The measured dc bias margin was 72.5-107.2%. Furthermore, we have demonstrated the operation of a variable bit-length shift register, composed of the dynamically reconfigurable JTL/DFF circuits. The investigated design approach can be applied to more sophisticated dynamically reconfigurable single flux quantum logic gates.

DOI
10.1109/tasc.2010.2090856

Related papers

Design methodology of single-flux-quantum flip-flops composed of both 0- and π-shifted Josephson junctions

Yuki Yamanashi, Sotaro Nakaishi, Akira Sugiyama +2 more

A methodology for designing single-flux-quantum (SFQ) flip-flops composed of both conventional (0-) and π -shifted Josephson junctions is investigated. We investigated the implementation of a storage loop, which can store flux quantum and is indispensable to express binary logic states in superconductor logic circuits. As all SFQ flip-flops have storage loops, the investigated design methodology can be applied to their design. We designed several SFQ flip-flops composed of 0- and π -shifted Josephson junctions using the investigated design methodology. The performances of the designed SFQ flip-flops were quantitatively evaluated by using an analog circuit simulator which we developed. We confirmed the correct operation of various SFQ flip-flops composed of 0- and π -shifted Josephson junctions with wide operating margins. Moreover, we observed that the investigated design methodology is suitable for SFQ flip-flops with complementary outputs because a storage loop composed of both 0- and π -shifted Josephson junctions has a symmetric structure and the complementary output function can be realized by using the storage loop. Our investigation indicates that the number of Josephson junctions and static power consumption of a non-destructive read-out flip-flop with complementary outputs (NDROC) can be reduced to less than half of those of the conventional NDROC, which has two storage loops composed of 0-Josephson junctions, to realize the complementary output function. The investigated design methodology is expected to be applied to not only SFQ circuits but also other superconducting logic circuits and novel reconfigurable logic devices using programmable 0- π Josephson junctions.

Superconductor Science and Technology•Aug 2, 2018•37 citations

Design Method of Single Flux Quantum Logic Circuits Using Dynamically Reconfigurable Logic Gates

Shohei Nishimoto

In this study, we designed and tested dynamically reconfigurable AND/OR and NAND/NOR single flux quantum (SFQ) logic gates. The measured dc bias margins at low frequency were 99%-126% and 121%-144% for AND/OR and NAND/NOR gates, respectively. The experimentally confirmed maximum operating frequencies of the AND/OR and NAND/NOR gates were 36 and 24 GHz, respectively. We investigated a circuit design method that enables the efficient design of SFQ logic circuits by using dynamically reconfigurable SFQ logic gates. The logic circuits were designed with a small number of gates using the input data pattern dependence of the Boolean function and reconfiguring the dynamically reconfigurable SFQ logic gates. As a case study, we designed and tested a bit-serial SFQ full adder using the investigated circuit design method. Compared with the conventional bit-serial SFQ full adder, the delay of the proposed full adder was reduced by 27%, assuming a clock frequency of 20 GHz. We confirmed correct operation of the adder with a low-speed test.

The Japan Society of Applied Physics•Feb 6, 2014•0 citations

Design Method of Single-Flux-Quantum Logic Circuits Using Dynamically Reconfigurable Logic Gates

Shohei Nishimoto, Yuki Yamanashi, Nobuyuki Yoshikawa

In this study, we designed and tested dynamically reconfigurable AND/OR and NAND/NOR single flux quantum (SFQ) logic gates. The measured dc bias margins at low frequency were 99%-126% and 121%-144% for AND/OR and NAND/NOR gates, respectively. The experimentally confirmed maximum operating frequencies of the AND/OR and NAND/NOR gates were 36 and 24 GHz, respectively. We investigated a circuit design method that enables the efficient design of SFQ logic circuits by using dynamically reconfigurable SFQ logic gates. The logic circuits were designed with a small number of gates using the input data pattern dependence of the Boolean function and reconfiguring the dynamically reconfigurable SFQ logic gates. As a case study, we designed and tested a bit-serial SFQ full adder using the investigated circuit design method. Compared with the conventional bit-serial SFQ full adder, the delay of the proposed full adder was reduced by 27%, assuming a clock frequency of 20 GHz. We confirmed correct operation of the adder with a low-speed test.

IEEE Transactions on Applied Superconductivity•Jan 1, 2015•9 citations

Single flux, quantum B flip-flop and its possible applications

Stanislav V. Polonsky, Vasili K. Semenov, Alex F. Kirichenko

We are introducing a new subfamily of rapid single-flux-quantum (RSFQ) digital cells, based on a single B flip-flop template. The template can be considered as an SFQ flip-flop with up to 4 inputs and 6 outputs. Each input SFQ pulse can change the flip-flop's internal state. Each output presents (in the form of SFQ pulses a specific logic function of the initial state of the cell and input signals. Simple connection of various inputs and/or outputs, combined with shortening or opening of certain branches of the template allows one to implement a variety of RSFQ cells with wide margins. Of these various RSFQ cells, we have designed and successfully tested the T1 cell (asynchronous toggle flip-flop with synchronous destructive readout), single-bit full adder, and single-bit stage of an up-down counter. Experimentally measured margins for dc power supply voltage for these circuits were /spl plusmn/24%, /spl plusmn/24%, and /spl plusmn/17%, respectively.>

IEEE Transactions on Applied Superconductivity•Mar 1, 1994•75 citations

30GHz Operation of Single-Flux-Quantum Arithmetic Logic Unit Implemented by Using Dynamically Reconfigurable Gates

Yuki Yamanashi, Shohei Nishimoto, Nobuyuki Yoshikawa

A single-flux-quantum (SFQ) arithmetic logic unit (ALU) was designed and tested to evaluate the effectiveness of introducing dynamically reconfigurable logic gates in the design of a superconducting logic circuit. We designed and tested a bit-serial SFQ ALU that can perform six arithmetic/logic functions by using a dynamically reconfigurable AND/OR gate. To ensure stable operation of the ALU, we improved the operating margin of the SFQ AND/OR gate by employing a partially shielded structure where the circuit is partially surrounded by under- and over-ground layers to reduce parasitic inductances. Owing to the introduction of the partially shielded structure, the operating margin of the dynamically reconfigurable AND/OR gate can be improved without increasing the circuit area. This ALU can be designed with a smaller circuit area compared with the conventional ALU by using the dynamically reconfigurable AND/OR gate. We implemented the SFQ ALU using the AIST 2.5kA/cm2 Nb standard process 2. We confirmed high-speed operation and correct reconfiguration of the SFQ ALU by a high-speed test. The measured maximum operation frequency was 30GHz.

IEICE Transactions on Electronics•Jan 1, 2016•1 citation

Demonstration of an efficient single flux quantum logic circuit by introducing a local magnetic flux biasing

Shunta Asada, Yuki Yamanashi, Nobuyuki Yoshikawa

Abstract We investigated local magnetic flux biasing (LFB) that induces a phase shift in superconductor circuits by locally applying a magnetic field through the superconductor loop with Josephson junctions. The arbitrary phase shift can be achieved using LFB without modifying the circuit fabrication process. To quantitatively evaluate the effects of introducing LFB for practical superconductor circuit applications, we designed a single flux quantum (SFQ) based non-destructive read-out flip-flop with complementary outputs (NDROC) and a delay flip-flop with complementary outputs (DFFC). The circuit area and static power consumption of the NDROC based on LFB architecture (LFB-NDROC) are approximately 67% and 36% of a conventional NDROC, respectively. The measured bias margin of the LFB-NDROC was in the range of 69%–129%. Using LFB, we were able to reduce the circuit area and power consumption for the DFFC by 67% and 83%, respectively. The measured bias margin of the DFFC with LFB was between 115% and 128%. LFB enabled us to implement a 5-to-32 SFQ decoder which comprises NDROC trees with a reduced circuit area of approximately 60% of a conventional decoder. The results obtained in this study can be applied to not just SFQ circuits but other superconductor circuits also, as they improve the area and power efficiency of such circuits.

Superconductor Science and Technology•Mar 25, 2021•2 citations
Novel reconfigurable superconductive single flux quantum (SFQ) logic devices, the functions of which can be dynamically reconfigured by inputting control signals, have been investigated. The characteristics of single flux quantum circuits can be easily modulated by applying currents or magnetic fields because of the high sensitivity of superconductive circuits. We investigated several design approaches for the realization of dynamically reconfigurable SFQ logic devices. We employed direct current injection to the logic gate using a non-destructive read-out flip-flop. By changing the internal state of the non-destructive read-out flip-flop, the logic function can be dynamically reconfigured. We have designed and tested a dynamically reconfigurable Josephson transmission line (JTL)/delay flip-flop (DFF) circuit. The measured dc bias margin was 72.5-107.2%. Furthermore, we have demonstrated the operation of a variable bit-length shift register, composed of the dynamically reconfigurable JTL/DFF circuits. The investigated design approach can be applied to more sophisticated dynamically reconfigurable single flux quantum logic gates.
A methodology for designing single-flux-quantum (SFQ) flip-flops composed of both conventional (0-) and π -shifted Josephson junctions is investigated. We investigated the implementation of a storage loop, which can store flux quantum and is indispensable to express binary logic states in superconductor logic circuits. As all SFQ flip-flops have storage loops, the investigated design methodology can be applied to their design. We designed several SFQ flip-flops composed of 0- and π -shifted Josephson junctions using the investigated design methodology. The performances of the designed SFQ flip-flops were quantitatively evaluated by using an analog circuit simulator which we developed. We confirmed the correct operation of various SFQ flip-flops composed of 0- and π -shifted Josephson junctions with wide operating margins. Moreover, we observed that the investigated design methodology is suitable for SFQ flip-flops with complementary outputs because a storage loop composed of both 0- and π -shifted Josephson junctions has a symmetric structure and the complementary output function can be realized by using the storage loop. Our investigation indicates that the number of Josephson junctions and static power consumption of a non-destructive read-out flip-flop with complementary outputs (NDROC) can be reduced to less than half of those of the conventional NDROC, which has two storage loops composed of 0-Josephson junctions, to realize the complementary output function. The investigated design methodology is expected to be applied to not only SFQ circuits but also other superconducting logic circuits and novel reconfigurable logic devices using programmable 0- π Josephson junctions.
In this study, we designed and tested dynamically reconfigurable AND/OR and NAND/NOR single flux quantum (SFQ) logic gates. The measured dc bias margins at low frequency were 99%-126% and 121%-144% for AND/OR and NAND/NOR gates, respectively. The experimentally confirmed maximum operating frequencies of the AND/OR and NAND/NOR gates were 36 and 24 GHz, respectively. We investigated a circuit design method that enables the efficient design of SFQ logic circuits by using dynamically reconfigurable SFQ logic gates. The logic circuits were designed with a small number of gates using the input data pattern dependence of the Boolean function and reconfiguring the dynamically reconfigurable SFQ logic gates. As a case study, we designed and tested a bit-serial SFQ full adder using the investigated circuit design method. Compared with the conventional bit-serial SFQ full adder, the delay of the proposed full adder was reduced by 27%, assuming a clock frequency of 20 GHz. We confirmed correct operation of the adder with a low-speed test.
In this study, we designed and tested dynamically reconfigurable AND/OR and NAND/NOR single flux quantum (SFQ) logic gates. The measured dc bias margins at low frequency were 99%-126% and 121%-144% for AND/OR and NAND/NOR gates, respectively. The experimentally confirmed maximum operating frequencies of the AND/OR and NAND/NOR gates were 36 and 24 GHz, respectively. We investigated a circuit design method that enables the efficient design of SFQ logic circuits by using dynamically reconfigurable SFQ logic gates. The logic circuits were designed with a small number of gates using the input data pattern dependence of the Boolean function and reconfiguring the dynamically reconfigurable SFQ logic gates. As a case study, we designed and tested a bit-serial SFQ full adder using the investigated circuit design method. Compared with the conventional bit-serial SFQ full adder, the delay of the proposed full adder was reduced by 27%, assuming a clock frequency of 20 GHz. We confirmed correct operation of the adder with a low-speed test.
We are introducing a new subfamily of rapid single-flux-quantum (RSFQ) digital cells, based on a single B flip-flop template. The template can be considered as an SFQ flip-flop with up to 4 inputs and 6 outputs. Each input SFQ pulse can change the flip-flop's internal state. Each output presents (in the form of SFQ pulses a specific logic function of the initial state of the cell and input signals. Simple connection of various inputs and/or outputs, combined with shortening or opening of certain branches of the template allows one to implement a variety of RSFQ cells with wide margins. Of these various RSFQ cells, we have designed and successfully tested the T1 cell (asynchronous toggle flip-flop with synchronous destructive readout), single-bit full adder, and single-bit stage of an up-down counter. Experimentally measured margins for dc power supply voltage for these circuits were /spl plusmn/24%, /spl plusmn/24%, and /spl plusmn/17%, respectively.>
A single-flux-quantum (SFQ) arithmetic logic unit (ALU) was designed and tested to evaluate the effectiveness of introducing dynamically reconfigurable logic gates in the design of a superconducting logic circuit. We designed and tested a bit-serial SFQ ALU that can perform six arithmetic/logic functions by using a dynamically reconfigurable AND/OR gate. To ensure stable operation of the ALU, we improved the operating margin of the SFQ AND/OR gate by employing a partially shielded structure where the circuit is partially surrounded by under- and over-ground layers to reduce parasitic inductances. Owing to the introduction of the partially shielded structure, the operating margin of the dynamically reconfigurable AND/OR gate can be improved without increasing the circuit area. This ALU can be designed with a smaller circuit area compared with the conventional ALU by using the dynamically reconfigurable AND/OR gate. We implemented the SFQ ALU using the AIST 2.5kA/cm2 Nb standard process 2. We confirmed high-speed operation and correct reconfiguration of the SFQ ALU by a high-speed test. The measured maximum operation frequency was 30GHz.
Abstract We investigated local magnetic flux biasing (LFB) that induces a phase shift in superconductor circuits by locally applying a magnetic field through the superconductor loop with Josephson junctions. The arbitrary phase shift can be achieved using LFB without modifying the circuit fabrication process. To quantitatively evaluate the effects of introducing LFB for practical superconductor circuit applications, we designed a single flux quantum (SFQ) based non-destructive read-out flip-flop with complementary outputs (NDROC) and a delay flip-flop with complementary outputs (DFFC). The circuit area and static power consumption of the NDROC based on LFB architecture (LFB-NDROC) are approximately 67% and 36% of a conventional NDROC, respectively. The measured bias margin of the LFB-NDROC was in the range of 69%–129%. Using LFB, we were able to reduce the circuit area and power consumption for the DFFC by 67% and 83%, respectively. The measured bias margin of the DFFC with LFB was between 115% and 128%. LFB enabled us to implement a 5-to-32 SFQ decoder which comprises NDROC trees with a reduced circuit area of approximately 60% of a conventional decoder. The results obtained in this study can be applied to not just SFQ circuits but other superconductor circuits also, as they improve the area and power efficiency of such circuits.