Several high-precision physics experiments are approaching a level of sensitivity at which the intrinsic quantum nature of the experimental apparatus is the dominant source of fluctuations limiting the sensitivity of the measurements. This quantum limit is embodied by the Heisenberg uncertainty principle, which prohibits arbitrarily precise simultaneous measurements of two conjugate observables of a system but allows one-time measurements of a single observable with any precision. The dynamical evolution of a system immediately following a measurement limits the class of observables that may be measured repeatedly with arbitrary precision, with the influence of the measurement apparatus on the system being confined strictly to the conjugate observables. Observables having this feature, and the corresponding measurements performed on them have been named quantum nondemolition or back-action evasion observables. In a previous review (Caves et al., 1980, Rev. Mod. Phys. 52, 341) a quantum-mechanical analysis of quantum nondemolition measurements of a harmonic oscillator was presented. The present review summarizes the experimental progress on quantum nondemolition measurements and the classical models developed to describe and guide the development of practical implementations of quantum nondemolition measurements. The relationship between the classical and quantum theoretical models is also reviewed. The concept of quantum nondemolition and back-action evasion measurements originated in the context of measurements on a macroscopic mechanical harmonic oscillator, though these techniques may be useful in other experimental contexts as well, as is discussed in the last part of this review. [S0034-6861(96)00103-1]
Several high-precision physics experiments are approaching a level of sensitivity at which the intrinsic quantum nature of the experimental apparatus is the dominant source of fluctuations limiting the sensitivity of the measurements. This quantum limit is embodied by the Heisenberg uncertainty principle, which prohibits arbitrarily precise simultaneous measurements of two conjugate observables of a system but allows one-time measurements of a single observable with any precision. The dynamical evolution of a system immediately following a measurement limits the class of observables that may be measured repeatedly with arbitrary precision, with the influence of the measurement apparatus on the system being confined strictly to the conjugate observables. Observables having this feature, and the corresponding measurements performed on them have been named quantum nondemolition or back-action evasion observables. In a previous review (Caves et al., 1980, Rev. Mod. Phys. 52, 341) a quantum-mechanical analysis of quantum nondemolition measurements of a harmonic oscillator was presented. The present review summarizes the experimental progress on quantum nondemolition measurements and the classical models developed to describe and guide the development of practical implementations of quantum nondemolition measurements. The relationship between the classical and quantum theoretical models is also reviewed. The concept of quantum nondemolition and back-action evasion measurements originated in the context of measurements on a macroscopic mechanical harmonic oscillator, though these techniques may be useful in other experimental contexts as well, as is discussed in the last part of this review. [S0034-6861(96)00103-1]
The monitoring of a quantum-mechanical harmonic oscillator on which a classical force acts is important in a variety of high-precision experiments, such as the attempt to detect gravitational radiation. This paper reviews the standard techniques for monitoring the oscillator, and introduces a new technique which, in principle, can determine the details of the force with arbitrary accuracy, despite the quantum properties of the oscillator. The standard method for monitoring the oscillator is the "amplitude-and-phase" method (position or momentum transducer with output fed through a narrow-band amplifier). The accuracy obtainable by this method is limited by the uncertainty principle ("standard quantum limit"). To do better requires a measurement of the type which Braginsky has called "quantum nondemolition." A well known quantum nondemolition technique is "quantum counting," which can detect an arbitrarily weak classical force, but which cannot provide good accuracy in determining its precise time dependence. This paper considers extensively a new type of quantum nondemolition measurement---a "back-action-evading" measurement of the real part X1 (or the imaginary part X2) of the oscillator's complex amplitude. In principle X1 can be measured "arbitrarily quickly and arbitrarily accurately," and a sequence of such measurements can lead to an arbitrarily accurate monitoring of the classical force. The authors describe explicit Gedanken experiments which demonstrate that X1 can be measured arbitrarily quickly and arbitrarily accurately. In these experiments the measuring apparatus must be coupled to both the position (position transducer) and the momentum (momentum transducer) of the oscillator, and both couplings must be modulated sinusoidally. For a given measurement time the strength of the coupling determines the accuracy of the measurement; for arbitrarily strong coupling the measurement can be arbitrarily accurate. The "momentum transducer" is constructed by combining a "velocity transducer" with a "negative capacitor" or "negative spring." The modulated couplings are provided by an external, classical generator, which can be realized as a harmonic oscillator excited in an arbitrarily energetic, coherent state. One can avoid the use of two transducers by making "stroboscopic measurements" of X1, in which one measures position (or momentum) at half-cycle intervals. Alternatively, one can make "continuous single-transducer" measurements of X1 by modulating appropriately the output of a single transducer (position or momentum), and then filtering the output to pick out the information about X1 and reject information about X2. Continuous single-transducer measurements are useful in the case of weak coupling. In this case long measurement times are required to achieve good accuracy, and continuous single-transducer measurements are almost as good as perfectly coupled two-transducer measurements. Finally, the authors develop a theory of quantum nondemolition measurement for arbitrary systems. This paper (Paper I) concentrates on issues of principle; a sequel (Paper II) will consider issues of practice.
In the measurements on an oscillator to detect short bursts of gravitational radiation, one important demand is the ability to use short integration times in order to decrease the contribution of thermal noise. This requires a strong coupling of the antenna to the measuring apparatus, i.e., a high value of the so-called electromechanical coupling parameter ${\mathrm{\ensuremath{\beta}}}_{0}$. A well-known solution is in the use of a resonant transducer, which entails the observation of a system of two harmonic oscillators. We extend to this system the back-action evasion technique by showing that one can perform a quantum nondemolition measurement on a double harmonic oscillator with essentially the same configuration as for the single one.
Quantum mechanics is potentially advantageous for certain information-processing tasks, but its probabilistic nature and requirement of measurement back action often limit the precision of conventional classical information-processing devices, such as sensors and atomic clocks. Here we show that by engineering the dynamics of coupled quantum systems, it is possible to construct a subsystem that evades the measurement back action of quantum mechanics, at all times of interest, and obeys any classical dynamics, linear or nonlinear, that we choose. We call such a system a quantum-mechanics-free subsystem (QMFS). All of the observables of a QMFS are quantum-nondemolition (QND) observables; moreover, they are dynamical QND observables, thus demolishing the widely held belief that QND observables are constants of motion. QMFSs point to a new strategy for designing classical information-processing devices in regimes where quantum noise is detrimental, unifying previous approaches that employ QND observables, back-action evasion, and quantum noise cancellation. Potential applications include gravitational-wave detection, optomechanical force sensing, atomic magnetometry, and classical computing. Demonstrations of dynamical QMFSs include the generation of broad-band squeezed light for use in interferometric gravitational-wave detection, experiments using entangled atomic spin ensembles, and implementations of the quantum Toffoli gate.
Limitations on the sensitivity for detecting a weak classical force acting on a harmonic oscillator are imposed by the quantum mechanical properties associated with a "standard" amplitude-and-phase measurement and, classically, by the back reaction noise associated with the finite noise temperature of the amplifier used to process the measurement. These are known as the "standard quantum limit" and the "standard amplifier limit", respectively. We present the theoretical motivation behind the quest to circumvent these limits, and examine a single-transducer back-action evading measurement scheme designed to perform a phase-sensitive coupling to the oscillator, with the concomitant circumvention of the standard amplifier limit via the "squeezing" of amplifier back reaction noise. The applicability of squeezing in the detection of gravitational radiation is explored via the dependence of detection sensitivity on the physical temperature and quality factor of the resonant-bar gravitational radiation antenna, on the noise temperature of the amplifier, and on the squeezing factor of the back-action evading measurement; the success of back-action evasion in improving upon the optimum amplitude-and-phase detection sensitivities depends critically upon these parameters. Using the LSU superconducting dual-cavity accelerometer as a test platform, we present direct evidence for the establishment of a phase-sensitive coupling to an oscillator, along with a variety of indirect corroborating evidence. This data indicates that our phase-sensitive measurement scheme is indeed more sensitive to one component of the oscillator than to the other component. We also present the first evidence for the existence of back-action evasion of amplifier back reaction noise. We show theoretical expectations and experimental results for the dependence of squeezing on: input signal phases, amplitudes, and frequencies; amplifier back reaction levels; background noise; mechanical oscillator frequency; and coherent carrier contribution at the cavity resonance frequency. Squeezing factors of up to fifteen were achieved by our back-action evading measurement scheme.
Aspects of quantum limits for the detection of a classical force The development of the theory of QND measurements was triggered by the problem of detecting a small classical force that acts on a quantum probe―e.g. on a free mass or an oscillator, see the review article and the monograph. This problem arose most especially in gravitational-wave experiments. Astrophysical estimates indicate that the gravitational waves from cosmic sources should be so strong that they behave almost perfectly classically. During the measuring time the number of gravitons that pass within one wavelength of the measuring device is enormously larger than unity; and correspondingly, as would be the case if the waves were electromagnetic, quantum effects in the radiation are utterly negligible. A central feature of gravitational waves is their extremely weak interaction with matter. Because of this weakness, the response of the measuring device's probe object to the waves is so small that it may be comparable to the object's quantum mechanical uncertainties. At the same time, the weakness of the interaction guarantees that there is almost no back action of the probe on the gravitational-wave field. As a result, the gravitational wave acts on the probe as through it were a precisely classical force (i.e. a force that is independent of the probe's quantum state).
In recent years advances in technology, especially in the field of quantum optics, have made possible repetitive quantum measurements on a single quantum object, an issue that remained an academic curiosity until 25 years ago. This book, first published in 1992, provides a tutorial introduction to this field. The book is coauthored by an experimentalist and a theorist: the former - Braginsky - was the first experimentalist after Weber to develop techniques for gravitational-wave detection; the latter - Khalili - contributed with Braginsky to develop the formal apparatus to describe the experimental devices for measurement schemes. After the first part, intended as a pedagogical appendix of a standard textbook, and devoted to the modern approach to quantum measurement, the second part is a review of some new methods of quantum measurements for macroscopic objects. The central problem is the detection of a small time-dependent classical force that acts on a quantum probe. This is the typical situation that occurs in gravitational-wave detection, where the probe is a macroscopic moving mass weakly coupled to a classical wave. The problem of gravitational-wave detection and the limitation to accuracy of measurement of position of a moving mass - the so-called standard quantum limit (SQL), which is a consequence of the random back-action of the measuring device on the mass - triggered the development of new quantum nondemolition (QND) measurements, i.e. measurements where the measured quantity is left unperturbed after the measurement. SQL and QND measurements (both Braginsky inventions) permeate the whole book as a transversal chapter. The aim is to give simple criteria and recipes to design a measuring device in order to optimize the accuracy of the measurement, and, at the same time, to minimize the perturbation that the device exerts on the measured object, so that it will not interfere with successive measurements on the same object. The continuous measurements are regarded as the limiting case of a sequence of repeated discrete measurements, when the interval between the measurements is much smaller than the characteristic time-scale on which the measured quantity changes. The analysis of continuous measurements give to the authors the opportunity to illustrate the watchdog effect and the quantum Zeno paradox (real effect), while deriving the master equation for the evolution of the object state. Then, an entire chapter is devoted to the analysis of devices for continuous measurement of small mechanical displacements. The book is easy to understand, and can serve as a complementary reading for graduate level courses in quantum mechanics. The material of the book can be useful for all scientists and engineers involved in researches related to high-sensitive quantum measurements, quantum information theory and quantum computation. The reader, however, should be aware that this book presents a very particular point of view, with no room left to very relevant concepts in quantum measurement theory, as, for example, squeezing, quantum amplification, joint-measurements of non-commuting observables and phase-measurements. More regrettably, the list of references is unsatisfactorily incomplete, with no mention of alternative developments, for example, regarding the SQL for measuring the position of a free mass. Here, schemes to breach the SQL have been proposed in the literature (Yuen H P 1983 Phys. Rev. Lett. 51 719, Ozawa M 1988 Phys. Rev. Lett. 60 385), whereas from the book one could conclude that such SQL would be unsurpassable. Also, a criticism is in order of the way of deriving some SQL's, based solely on the Heisenberg relation, even in consideration that the aim of such derivations is mostly pedagogical.