Cooperative communications is obviously an evolution in wireless networks due to its noticeable advantages such as increasing the coverage as well as combating fading and shadowing effects. However, the broadcast characteristic of a wireless medium which is exploited in cooperative communications leads to a variety of security vulnerabilities. As cooperative communication networks are globally expanded, they expose to security attacks and threats more than ever. Primarily, researchers have focused on upper layers of network architectures to meet the requirements for secure cooperative transmission while the upper-layer security solutions are incapable of combating a number of security threats, e.g., jamming attacks. To address this issue, physical-layer security has been recommended as a complementary solution in the literature. In this thesis, physical layer attacks of the cooperative communication systems are studied, and corresponding security techniques including cooperative jamming, beamforming and diversity approaches are investigated. In addition, a novel security solution for a two-hop decode-and-forward relaying system is presented where the transmitters insert a random phase shift to the modulated data of each hop. The random phase shift is created based on a shared secret among communicating entities. Thus, the injected phase shift confuses the eavesdropper and secrecy capacity improves. Furthermore, a cooperative jamming strategy for multi-hop decode-and-forward relaying systems is presented where multiple non-colluding illegitimate nodes can overhear the communication. The jamming signal is created by the transmitter of each hop while being sent with the primary signal. The jamming signal is known at the intended receiver as it is according to a secret common knowledge between the communicating entities. Hence, artificial noise misleads the eavesdroppers, and decreases their signal-to-noise-ratio. As a result, secrecy capacity of the system is improved. Finally, power allocation among friendly jamming and main signal is proposed to ensure that suggested scheme enhances secrecy.
Cooperative communications is obviously an evolution in wireless networks due to its noticeable advantages such as increasing the coverage as well as combating fading and shadowing effects. However, the broadcast characteristic of a wireless medium which is exploited in cooperative communications leads to a variety of security vulnerabilities. As cooperative communication networks are globally expanded, they expose to security attacks and threats more than ever. Primarily, researchers have focused on upper layers of network architectures to meet the requirements for secure cooperative transmission while the upper-layer security solutions are incapable of combating a number of security threats, e.g., jamming attacks. To address this issue, physical-layer security has been recommended as a complementary solution in the literature. In this thesis, physical layer attacks of the cooperative communication systems are studied, and corresponding security techniques including cooperative jamming, beamforming and diversity approaches are investigated. In addition, a novel security solution for a two-hop decode-and-forward relaying system is presented where the transmitters insert a random phase shift to the modulated data of each hop. The random phase shift is created based on a shared secret among communicating entities. Thus, the injected phase shift confuses the eavesdropper and secrecy capacity improves. Furthermore, a cooperative jamming strategy for multi-hop decode-and-forward relaying systems is presented where multiple non-colluding illegitimate nodes can overhear the communication. The jamming signal is created by the transmitter of each hop while being sent with the primary signal. The jamming signal is known at the intended receiver as it is according to a secret common knowledge between the communicating entities. Hence, artificial noise misleads the eavesdroppers, and decreases their signal-to-noise-ratio. As a result, secrecy capacity of the system is improved. Finally, power allocation among friendly jamming and main signal is proposed to ensure that suggested scheme enhances secrecy.
The broadcast nature of wireless communications makes the propagation medium vulnerable to security attacks such as eavesdropping and jamming from adversarial or unauthorized users. Applying physical layer secrecy approaches will enable the exchange of confidential messages over a wireless medium in the presence of unauthorized eavesdroppers, without using any secret keys. However, physical layer security approaches are typically feasible only when the source-eavesdropper channel is weaker than the source-destination channel. Cooperative jamming can be used to overcome this challenge and increase the secrecy rate. In this paper, the security of two-phase relaying system with multiple intermediate nodes and in the presence of an eavesdropper is investigated. To enhance the system secrecy rate, a joint cooperative beamforming and jamming combined with relay and jammer selections is proposed. In phase I, the source node broadcasts a signal to relays while three intermediate nodes (which act as jammers) help the source node by transmitting random jamming signals to confuse the eavesdropper. Since the friendly (cooperative) jammers create interference for both the intended relays and the eavesdropper, optimal beamforming is applied such that no interference is caused at two preselected desired relays (that are going to receive the confidential massage in phase I). In phase II, two preselected relays transmit the source message with beamforming coefficients such that the received signal at the eavesdropper is completely nulled out. Our goal in this paper is to minimize the received SNR at the eavesdropper while increasing it at the destination as much as possible by applying different methods such as cooperative beamforming, cooperative jamming and relay selection. To avoid operational complexity, we consider the minimum number of intermediate nodes that are necessary without losing the performance. Numerical results demonstrate the advantage of our proposed scheme compared with the scheme with no cooperative jamming.
Motivated by recent developments in wireless communication, this thesis aims to characterize the secrecy performance in several types of typical wireless networks. Advanced techniques are designed and evaluated to enhance physical layer security in these networks with realistic assumptions, such as signal propagation loss, random node distribution and non-instantaneous channel state information (CSI). The first part of the thesis investigates secret communication through relay-assisted cognitive interference channel. The primary and secondary base stations (PBS and SBS) communicate with the primary and secondary receivers (PR and SR) respectively in the presence of multiple eavesdroppers. The SBS is allowed to transmit simultaneously with the PBS over the same spectrum instead of waiting for an idle channel. To improve security, cognitive relays transmit cooperative jamming (CJ) signals to create additional interferences in the direction of the eavesdroppers. Two CJ schemes are proposed to improve the secrecy rate of cognitive interference channels depending on the structure of cooperative relays. In the scheme where the multiple-antenna relay transmits weighted jamming signals, the combined approach of CJ and beamforming is investigated. In the scheme with multiple relays transmitting weighted jamming signals, the combined approach of CJ and relay selection is analyzed. Numerical results show that both these two schemes are effective in improving physical layer security of cognitive interference channel. In the second part, the focus is shifted to physical layer security in a random wireless network where both legitimate and eavesdropping nodes are randomly distributed. Three scenarios are analyzed to investigate the impact of various factors on security. In scenario one, the basic scheme is studied without a protected zone and interference. The probability distribution function (PDF) of channel gain with both fading and path loss has been derived and further applied to derive secrecy connectivity and ergodic secrecy capacity. In the second scenario, we studied using a protected zone surrounding the source node to enhance security where interference is absent. Both the cases that eavesdroppers are aware and unaware of the protected zone boundary are investigated. Based on the above scenarios, further deployment of the protected zones at legitimate receivers is designed to convert detrimental interference into a beneficial factor. Numerical results are investigated to check the reliability of the PDF for reciprocal of channel gain and to analyze the impact of protected zones on secrecy performance. In the third part, physical layer security in the downlink transmission of cellular network is studied. To model the repulsive property of the cellular network planning, we assume that the base stations (BSs) follow the Mat´ern hard-core point process (HCPP), while the eavesdroppers are deployed as an independent Poisson point process (PPP). The distribution function of the distances from a typical point to the nodes of the HCPP is derived. The noise-limited and interference-limited cellular networks are investigated by applying the fractional frequency reuse (FFR) in the system. For the noise-limited network, we derive the secrecy outage probability with two different strategies, i.e. the best BS serve and the nearest BS serve, by analyzing the statistics of channel gains. For the interference-limited network with the nearest BS serve, two transmission schemes are analyzed, i.e., transmission with and without the FFR. Numerical results reveal that both the schemes of transmitting with the best BS and the application of the FFR are beneficial for physical layer security in the downlink cellular networks, while the improvement due
Physical (PHY) layer security approaches for wireless communications can prevent eavesdropping without upper layer data encryption. However, they are hampered by wireless channel conditions: absent feedback, they are typically feasible only when the source-destination channel is better than the source-eavesdropper channel. Node cooperation is a means to overcome this challenge and improve the performance of secure wireless communications. This paper addresses secure communications of one source-destination pair with the help of multiple cooperating relays in the presence of one or more eavesdroppers. Three cooperative schemes are considered: decode-and-forward (DF), amplify-and-forward (AF), and cooperative jamming (CJ). For these schemes, the relays transmit a weighted version of a reencoded noise-free message signal (for DF), a received noisy source signal (for AF), or a common jamming signal (for CJ). Novel system designs are proposed, consisting of the determination of relay weights and the allocation of transmit power, that maximize the achievable secrecy rate subject to a transmit power constraint, or, minimize the transmit power subject to a secrecy rate constraint. For DF in the presence of one eavesdropper, closed-form optimal solutions are derived for the relay weights. For other problems, since the optimal relay weights are difficult to obtain, several criteria are considered leading to suboptimal but simple solutions, i.e., the complete nulling of the message signals at all eavesdroppers (for DF and AF), or the complete nulling of jamming signal at the destination (for CJ). Based on the designed relay weights, for DF in the presence of multiple eavesdroppers, and for CJ in the presence of one eavesdropper, the optimal power allocation is obtained in closed-form; in all other cases the optimal power allocation is obtained via iterative algorithms. Numerical evaluation of the obtained secrecy rate and transmit power results show that the proposed design can significantly improve the performance of secure wireless communications.
Security has become an increasingly significant and urgent issue in wireless networks. The growing computational capability of the eavesdropper (Eve) and more and more complicated secure key management in large scale and heterogeneous networks, pose more and more stringent requirement to the cryptographic protocols. As a new design paradigm, physical layer security has been recognised as a promising solution to enhance the security of wireless links relying on the channel properties and advanced signal processing, and can act as either an alternative or a complementary solution to the conventional cryptographic methods. Without complicated secure key generation and management, physical layer security is quite suitable for the large scale distributed networks. In this thesis, we aim to improve the secrecy performance in emerging wireless communication systems relying on different physical layer security techniques. Firstly, the security of an amplify-and-forward successive relaying network with multiple untrusted relay nodes is investigated, where the conventional detrimental inter-relay interference is exploited to jam the untrusted nodes without assistance of external helpers. Considering different complexity requirements, several relay selection schemes are proposed, and the closed-form expressions of the lower bound of the secrecy outage probability and the maximum secrecy diversity order are derived accordingly. It is shown that the maximum secrecy diversity order of N-1 can be achieved for an N relay nodes network. Secondly, the artificial noise (AN) aided secure transmission strategy for a multiple-input single-output multiple-Eve (MISOME) system with a secure user (Bob) and a normal user (NU) is investigated. The power allocations among Bob, NU and AN, as well as the wiretap code rates, are jointly optimized to maximize the effective secrecy throughput (EST), under the average throughput constraint of NU. An alternative optimization algorithm with guaranteed convergence is proposed to obtain the optimal parameters. It is shown that the EST increases with the transmitting power and the number of transmit antennas, and decreases with the throughput constraint of NU, and the EST can be improved through injecting AN and concurrent transmission of Bob and NU. Thirdly, physical layer security in a multi-antenna small-cell network is investigated, where the multi-antenna base stations (BSs), cellular users, and Eves are all randomly distributed according to independent Poisson point processes. Stochastic geometry is applied to analyze the connection and secrecy outage probabilities and the average achievable secrecy rate. The impact of different parameters, including power allocation, BS and Eve density, and the adaptive eavesdropping or jamming on the secrecy performance is analyzed. It is shown that the average secrecy rate is a quasi-concave function of the power allocation factor and monotonically decreases with the ratio of the Eve-BS density. Finally, we study the physical layer security in a large-scale heterogeneous network consisting of both sub-6 GHz massive multi-input multi-output (MIMO) macro cells and millimeter wave (mmWave) small cells. By considering pilot spoofing attacks from the Eves, the coverage and secrecy probabilities are derived using stochastic geometry and the conditions under which the millimeter wave tier outperforms the sub-6 GHz counterpart are discussed in terms of both coverage and secrecy.It is shown that the mmWave small cell can provide better coverage performance in the high transmission code-rate region, and the secrecy performance of the mmWave system outperforms the sub-6 GHz counterpart in the low redundant rate region, which reveals the advantage of using mmWave for secure communication.
Due to the broadcast nature of radio propagation, wireless transmission can be readily overheard by unauthorized users for interception purposes and is thus highly vulnerable to eavesdropping attacks. To this end, physical-layer security is emerging as a promising paradigm to protect the wireless communications against eavesdropping attacks by exploiting the physical characteristics of wireless channels. This article is focused on the investigation of diversity techniques to improve physical-layer security differently from the conventional artificial noise generation and beamforming techniques, which typically consume additional power for generating artificial noise and exhibit high implementation complexity for beamformer design. We present several diversity approaches to improve wireless physical-layer security, including multiple-input multiple-output (MIMO), multiuser diversity, and cooperative diversity. To illustrate the security improvement through diversity, we propose a case study of exploiting cooperative relays to assist the signal transmission from source to destination while defending against eavesdropping attacks. We evaluate the security performance of cooperative relay transmission in Rayleigh fading environments in terms of secrecy capacity and intercept probability. It is shown that as the number of relays increases, both the secrecy capacity and intercept probability of cooperative relay transmission improve significantly, implying there is an advantage in exploiting cooperative diversity to improve physical-layer security against eavesdropping attacks.
In this paper, the security of two-phase relaying system with multiple intermediate nodes in the presence of a malicious eavesdropper is investigated. To enhance the secrecy, a joint cooperative beamforming and jamming combined with relay and jammer selection is proposed. First, the source broadcasts its signal to the relays that are located close to source in a cluster, i.e., the source node uses a small amount of power to broadcast its message locally to other nodes of the cluster, while destination and the eavesdropper are located outside this cluster. In the second phase, two relays transmit re-encoded signal with optimal beamforming such that the secrecy rate is maximized. Simultaneously, two other intermediate nodes (which act as friendly jammers) transmit random jamming signals to degrade the eavesdropper’s channel. Our goal in this paper is to maximize the secrecy rate by applying different methods such as cooperative beamforming, cooperative jamming and relay and jammer selection. To avoid operational complexity, we consider the minimum number of intermediate nodes needed for relaying and jamming without losing the performance, i.e., achieving a non-zero secrecy rate. Cooperative beamforming with multiple relays demands high amount of information exchange and therefore increases the operational complexity. Thus, we aim to reduce the number of relays which take part in cooperative beamforming. Limiting the number of relays may have a bad effect on the coding gain which we compensate it with a proposed selection gain scheme. Numerical results demonstrate the advantage of our proposed scheme compared to the scheme with no cooperative jamming. The main contribution of this work is combining cooperative beamforming and jamming with relay and jammer selection to enhance the physical layer security.