Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE Transactions on Microwave Theory and Techniques

Wideband Nonlinear Response of High-Temperature Superconducting Thin Films From Transmission-Line Measurements

Jordi Mateu, James C. Booth, Brian H. Moeckly

Published Jul 1, 2007• 3 citations
Publisher

Abstract

We report on a technique for extracting an accurate value of the nonlinear inductance in superconducting transmission lines. This novel technique assesses the frequency dependence of the transmission line's nonlinear response. A wideband nonlinear measurement system was used to simultaneously measure the third-order spurious signals at 2f1- f2,2f2- f1+ f2, 2f2+ f1, 3f1, and 3f2frequencies. Measurements for different values of the fundamental frequencies f1and f2allow us to study the spurious signal generation from 1 to 21 GHz. We demonstrate this technique by measuring several superconducting YBa2Cu3O7-xcoplanar waveguide transmission line geometries patterned in a single chip at 80 K. The results show a linear frequency dependence of the nonlinear response, indicating a dominant contribution of the nonlinear inductance over the nonlinear resistance omegaDeltaL(i) Gt DeltaR(i). The experimentally obtained nonlinear inductances are then used to determine device-independent measures of the linearity of the thin-film material in order to provide the foundation for modeling the nonlinear response of specific devices.

DOI
10.1109/tmtt.2007.900212

Related papers

Frequency dependence of the nonlinear response in YBa2Cu3O7−x transmission lines

Jordi Mateu, James C. Booth, Brian H. Moeckly

The authors evaluate the frequency dependence of the nonlinear response in high-temperature superconductor YBa2Cu3O7−x thin films by simultaneously measuring the nonlinear intermodulation products and harmonic generation in broadband superconducting transmission lines at 76K. The frequencies of the two-tone incident signal are set to produce spurious signals from 1to21GHz. They extract a nonlinear term ∣ΔR2+jωΔL2∣ by applying a model of spurious signal generation in superconducting transmission lines to their measurement results. They found that this nonlinear term follows a linear dependence on frequency, indicating a dominant contribution of the nonlinear inductance ΔL2 over the nonlinear resistance ΔR2, (ωΔL2⪢ΔR2), for the superconducting nonlinear response.

Applied Physics Letters•Jan 1, 2007•7 citations

Modeling linear and nonlinear inductive effects in superconducting planar circuits

James C. Booth, Christopher L. Holloway, Edward F. Kuester

Superconducting planar circuits possess properties that can be very different from their normal-metal counterparts, which makes modeling efforts more complicated for superconducting components. In this paper we present closed-form expressions for the resistance and internal inductance per unit length of superconducting planar transmission lines in terms of the relevant material parameters. We also include a simple calculation of the nonlinear response of superconducting devices based on a current-dependent superconducting penetration depth. Taken together, these two descriptions can be used to predict the linear and nonlinear response of superconducting planar devices in a manner that is conducive to use in circuit design. The results of these calculations compare well with 76 K measurements of coplanar waveguide transmission lines and resonators fabricated from thin films of the high T/sub c/ superconductor YBa/sub 2/Cu/sub 3/O/sub 7-/spl delta//.

IEEE International Symposium on Electromagnetic Compatibility•Nov 13, 2002•1 citation

High kinetic inductance NbTiN superconducting transmission line resonators in the very thin film limit

Terence Bretz-Sullivan, Rupert Lewis, Ana L. Lima-Sharma +6 more

We examine the DC and radio frequency (RF) response of superconducting transmission line resonators comprised of very thin NbTiN films, <12 nm in thickness, in the high-temperature limit, where the photon energy is less than the thermal energy. The resonant frequencies of these superconducting resonators show a significant nonlinear response as a function of RF input power, which can approach a frequency shift of Δf=−0.15% in a −20 dB span in the thinnest film. The strong nonlinear response allows these very thin film resonators to serve as high kinetic inductance parametric amplifiers.

Applied Physics Letters•Aug 1, 2022•19 citations

Nonlinearity of superconducting transmission line and microstrip resonator

Orest G. Vendik, Irina B. Vendik, T. B. Samoǐlova

The simplest model of nonlinear response of a superconducting thin film is used for modeling the nonlinear phenomena in a superconducting transmission line and a microstrip resonator. The specified characteristic power of the transmission line is suggested to use as a fitting parameter for numerical description of the microstrip line nonlinearity at microwaves. Quantitative agreement of simulated and experimental data has been obtained for the incident power dependent transmission coefficient of a microstrip line section and a high quality microstrip resonator. Numerical results have also been obtained for the power of the third harmonic radiated from the nonlinear resonator.

IEEE Transactions on Microwave Theory and Techniques•Jan 1, 1997•70 citations

Gain evaluation of a superconducting parametric amplifier using the transmission characteristics of YBCO thin film coplanar waveguides

Ibuki Takahashi, Hisashi Shimakage

Abstract We measured the microwave transmission characteristics of coplanar waveguides (CPWs) fabricated using YBa2Cu3O7−δ (YBCO) thin films with DC current biases. Kinetic inductances ( L K ) and nonlinear parameters ( I * ) were evaluated for CPWs with film thicknesses of 20, 50, and 200 nm. The results indicate that the experimental values closely follow the second-order nonlinearity exhibited by the L K . To operate as a superconducting parametric amplifier with a standard gain of 20 dB and a pump power of −10 dBm, we introduced a step-impedance structure into the transmission line. As a result, when using an MgO substrate, the required line length was estimated to be approximately 1.25 m, corresponding to approximately 29 times the wavelength of the CPW.

Japanese Journal of Applied Physics•Jun 1, 2025•1 citation

Superconducting Nonlinear Kinetic Inductance Devices

Kher, Aditya Shreyas

We describe a novel class of devices based on the nonlinearity of the kinetic inductance of a superconducting thin film. By placing a current-dependent inductance in a microwave resonator, small currents can be measured through their effect on the resonator’s frequency. By using a high-resistivity material for the film and nanowires as kinetic inductors, we can achieve a large coefficient of nonlinearity to improve device sensitivity. We demonstrate a current sensitivity of 8 pA/√Hz, making this device useful for transition-edge sensor (TES) readout and other cutting-edge applications. An advantage of these devices is their natural ability to be multiplexed in the frequency domain, enabling large detector arrays for TES-based instruments. A traveling-wave version of the device, consisting of a thin-film microwave transmission line, is also sensitive to small currents as they change the phase length of the line due to their effect on its inductance. We demonstrate a current sensitivity of 5 pA/√Hz for this version of the device, making it also suitable for TES readout as well as other current-detection applications. It has the advantage of multi-gigahertz bandwidth and greater dynamic range, offering a different approach to the resonator version of the device. Finally, we also demonstrate a transmission-line resonator version of the device that combines some of the advantages of the nanowire resonator and the traveling-wave device. This version of the device has high dynamic range but can also be easily multiplexed in the frequency domain. A lumped-element resonator similar to the first device can be placed in a loop configuration to make it sensitive to magnetic fields. We demonstrate an example of such a device whose sensitivity could ultimately reach levels similar to those of state-of-the-art DC SQUIDs, making it potentially useful for many magnetometry applications given its ease of multiplexing. Finally, a similar microwave resonator is shown to exhibit parametric gain of up to 29 dB in the presence of a strong pump tone. The noise performance of this parametric amplifier approaches the quantum limit, making it useful for applications in quantum information and metrology.

•Feb 10, 2017•17 citations
We report on a technique for extracting an accurate value of the nonlinear inductance in superconducting transmission lines. This novel technique assesses the frequency dependence of the transmission line's nonlinear response. A wideband nonlinear measurement system was used to simultaneously measure the third-order spurious signals at 2f1- f2,2f2- f1+ f2, 2f2+ f1, 3f1, and 3f2frequencies. Measurements for different values of the fundamental frequencies f1and f2allow us to study the spurious signal generation from 1 to 21 GHz. We demonstrate this technique by measuring several superconducting YBa2Cu3O7-xcoplanar waveguide transmission line geometries patterned in a single chip at 80 K. The results show a linear frequency dependence of the nonlinear response, indicating a dominant contribution of the nonlinear inductance over the nonlinear resistance omegaDeltaL(i) Gt DeltaR(i). The experimentally obtained nonlinear inductances are then used to determine device-independent measures of the linearity of the thin-film material in order to provide the foundation for modeling the nonlinear response of specific devices.
The authors evaluate the frequency dependence of the nonlinear response in high-temperature superconductor YBa2Cu3O7−x thin films by simultaneously measuring the nonlinear intermodulation products and harmonic generation in broadband superconducting transmission lines at 76K. The frequencies of the two-tone incident signal are set to produce spurious signals from 1to21GHz. They extract a nonlinear term ∣ΔR2+jωΔL2∣ by applying a model of spurious signal generation in superconducting transmission lines to their measurement results. They found that this nonlinear term follows a linear dependence on frequency, indicating a dominant contribution of the nonlinear inductance ΔL2 over the nonlinear resistance ΔR2, (ωΔL2⪢ΔR2), for the superconducting nonlinear response.
Superconducting planar circuits possess properties that can be very different from their normal-metal counterparts, which makes modeling efforts more complicated for superconducting components. In this paper we present closed-form expressions for the resistance and internal inductance per unit length of superconducting planar transmission lines in terms of the relevant material parameters. We also include a simple calculation of the nonlinear response of superconducting devices based on a current-dependent superconducting penetration depth. Taken together, these two descriptions can be used to predict the linear and nonlinear response of superconducting planar devices in a manner that is conducive to use in circuit design. The results of these calculations compare well with 76 K measurements of coplanar waveguide transmission lines and resonators fabricated from thin films of the high T/sub c/ superconductor YBa/sub 2/Cu/sub 3/O/sub 7-/spl delta//.
We examine the DC and radio frequency (RF) response of superconducting transmission line resonators comprised of very thin NbTiN films, <12 nm in thickness, in the high-temperature limit, where the photon energy is less than the thermal energy. The resonant frequencies of these superconducting resonators show a significant nonlinear response as a function of RF input power, which can approach a frequency shift of Δf=−0.15% in a −20 dB span in the thinnest film. The strong nonlinear response allows these very thin film resonators to serve as high kinetic inductance parametric amplifiers.
The simplest model of nonlinear response of a superconducting thin film is used for modeling the nonlinear phenomena in a superconducting transmission line and a microstrip resonator. The specified characteristic power of the transmission line is suggested to use as a fitting parameter for numerical description of the microstrip line nonlinearity at microwaves. Quantitative agreement of simulated and experimental data has been obtained for the incident power dependent transmission coefficient of a microstrip line section and a high quality microstrip resonator. Numerical results have also been obtained for the power of the third harmonic radiated from the nonlinear resonator.
Abstract We measured the microwave transmission characteristics of coplanar waveguides (CPWs) fabricated using YBa2Cu3O7−δ (YBCO) thin films with DC current biases. Kinetic inductances ( L K ) and nonlinear parameters ( I * ) were evaluated for CPWs with film thicknesses of 20, 50, and 200 nm. The results indicate that the experimental values closely follow the second-order nonlinearity exhibited by the L K . To operate as a superconducting parametric amplifier with a standard gain of 20 dB and a pump power of −10 dBm, we introduced a step-impedance structure into the transmission line. As a result, when using an MgO substrate, the required line length was estimated to be approximately 1.25 m, corresponding to approximately 29 times the wavelength of the CPW.
We describe a novel class of devices based on the nonlinearity of the kinetic inductance of a superconducting thin film. By placing a current-dependent inductance in a microwave resonator, small currents can be measured through their effect on the resonator’s frequency. By using a high-resistivity material for the film and nanowires as kinetic inductors, we can achieve a large coefficient of nonlinearity to improve device sensitivity. We demonstrate a current sensitivity of 8 pA/√Hz, making this device useful for transition-edge sensor (TES) readout and other cutting-edge applications. An advantage of these devices is their natural ability to be multiplexed in the frequency domain, enabling large detector arrays for TES-based instruments. A traveling-wave version of the device, consisting of a thin-film microwave transmission line, is also sensitive to small currents as they change the phase length of the line due to their effect on its inductance. We demonstrate a current sensitivity of 5 pA/√Hz for this version of the device, making it also suitable for TES readout as well as other current-detection applications. It has the advantage of multi-gigahertz bandwidth and greater dynamic range, offering a different approach to the resonator version of the device. Finally, we also demonstrate a transmission-line resonator version of the device that combines some of the advantages of the nanowire resonator and the traveling-wave device. This version of the device has high dynamic range but can also be easily multiplexed in the frequency domain. A lumped-element resonator similar to the first device can be placed in a loop configuration to make it sensitive to magnetic fields. We demonstrate an example of such a device whose sensitivity could ultimately reach levels similar to those of state-of-the-art DC SQUIDs, making it potentially useful for many magnetometry applications given its ease of multiplexing. Finally, a similar microwave resonator is shown to exhibit parametric gain of up to 29 dB in the presence of a strong pump tone. The noise performance of this parametric amplifier approaches the quantum limit, making it useful for applications in quantum information and metrology.