The authors describe the characterization and interpretation of the performance of superconductor-insulator-superconductor (SIS) receivers within the framework of the photodiode theory of mixing. The quantum efficiency plays a dominant role in the theory, and a simple method of accurately measuring this parameter is presented. It is demonstrated that the quantum efficiency measurements can be conveniently made on a standard radio astronomy receiver and combined with the usual hot and cold load characterization to improve the understanding of the receiver's performance. The measurements verify that the photodiode theory of mixing accurately describes the receiver noise even at local-oscillator power levels well above the linear response range. The results for receivers operating at 100 and 240 GHz verify the utility of this approach. These methods should also prove useful in evaluating submillimeter receivers.>
The authors describe the characterization and interpretation of the performance of superconductor-insulator-superconductor (SIS) receivers within the framework of the photodiode theory of mixing. The quantum efficiency plays a dominant role in the theory, and a simple method of accurately measuring this parameter is presented. It is demonstrated that the quantum efficiency measurements can be conveniently made on a standard radio astronomy receiver and combined with the usual hot and cold load characterization to improve the understanding of the receiver's performance. The measurements verify that the photodiode theory of mixing accurately describes the receiver noise even at local-oscillator power levels well above the linear response range. The results for receivers operating at 100 and 240 GHz verify the utility of this approach. These methods should also prove useful in evaluating submillimeter receivers.>
The review presents a theoretical framework for understanding submillimeter detection using an optical photodiode theory. Both gain and noise in the superconductor-insulator-superconductor (SIS) mixer are described in terms of mixing on a photodiode. The role of impedance matching in the proper design of an SIS mixer is described. A variety of methods for achieving good impedance match at submillimeter frequencies are presented. The state of the submillimeter SIS mixer art as practiced in a variety of laboratories is described and summarized.>
The dependence of the performance of Superconductor-Insulator-Superconductor (SIS) mixers on the ambient temperature is investigated both theoretically and experimentally at millimeter and submillimeter wavelength. We found that the mixers' conversion gain plays a dominant role in the temperature-induced variation of the overall receiver sensitivity. To achieve a straightforward image of how the ambient temperature influences the conversion gain, we introduce a pure shape factor that allows for determining the mixers' conversion gain from the nonlinearity of their IV curves. We measured the performance of an SIS mixer at 100GHz band with the ambient temperature ranging from 3.8K to 8.5K to verify the validity of the quantum mixing theory. The experimental results are found in good agreement with the simulation results. This agreement indicates the validity of quantum mixing theory at a relatively high temperature up to the superconducting critical temperature. The measurement results show that at 100GHz band, the Nb SIS mixer can maintain a reasonable performance at the ambient temperature as high as 80% of the superconducting critical temperature. In addition to the gain and noise, the receiver stability in terms of Allen variance was also measured at various ambient temperatures without any apparent difference found.
The dependence of the performance of Superconductor-Insulator-Superconductor (SIS) mixers on the ambient temperature is investigated both theoretically and experimentally at millimeter and submillimeter wavelength. We found that the mixers' conversion gain plays a dominant role in the temperature-induced variation of the overall receiver sensitivity. To achieve a straightforward image of how the ambient temperature influences the conversion gain, we introduce a pure shape factor that allows for determining the mixers' conversion gain from the nonlinearity of their IV curves. We measured the performance of an SIS mixer at 100GHz band with the ambient temperature ranging from 3.8K to 8.5K to verify the validity of the quantum mixing theory. The experimental results are found in good agreement with the simulation results. This agreement indicates the validity of quantum mixing theory at a relatively high temperature up to the superconducting critical temperature. The measurement results show that at 100GHz band, the Nb SIS mixer can maintain a reasonable performance at the ambient temperature as high as 80% of the superconducting critical temperature. In addition to the gain and noise, the receiver stability in terms of Allen variance was also measured at various ambient temperatures without any apparent difference found.
Theoretical research has been conducted to elucidate the basic physics behind the properties of superconductor-insulator-superconductor (SIS) tunnel junction receiving devices. The properties of SIS mixers using nonideal junctions and finite LO power, were determined by analytic expansion of the equations of the quantum theory of mixing, and also by computer simulations of SIS receivers over the entire range of experimental parameters. The result is a new coherent and intuitive picture of SIS mixer behavior. Many of the outstanding mysteries and questions about SIS receivers are resolved, and this contributes greatly to the design and interpretation of SIS mixer experiments. Other calculations show how to achieve sub-quantum noise temperatures in the phase sensitive SIS mixer, an important step towards realization of ultra-low- noise detectors. A simplified model casts doubt on the superlative experimental results reported for the rf-series dc-parallel biased array SIS mixer. Superconductivity; SIS mixer; Submillimeter-wave detection.
Heterodyne receivers based on superconductor-insulator-superconductor (SIS) tunnel diodes are the most sensitive available for near-millimeter wavelengths. Since the late seventies, receivers based on SISs have been used for millimeter band observations at radio observatories around the world. The work described here was carried out with the elusive goal in mind of developing ideal SIS receivers for radioastronomy. This thesis describes one researcher's path towards this goal. In the first chapter, a basic description of SIS diodes, their interaction with radiation, and heterodyne detection are given. The important detailed results of J. R. Tucker's tunnel diode heterodyne theory are described, since subsequent chapters rely on Tucker's work quite heavily. Throughout this introductory chapter, extremely simple (by comparison with the algebraic theoretical results) physical models are used to describe superconductivity, SISs, photon-assisted tunneling, and heterodyne detection. It is the author's experience that these physical models can be used to derive correct theoretical results, long before these results are proved rigorously. The second chapter presents a fully quantum mechanical theory of heterodyne detection with diodes. This theory was developed because Tucker's theory for tunnel diodes predicts a greater mixer sensitivity than is possible considering Heisenberg's uncertainty principle for radiation. Tucker does not quantize the radiation incident on the SIS, although his treatment of the isolated tunnel diode is completely quantum mechanical. In chapter 2, the quantization of radiation is carried out for heterodyne diode detectors. The formalism is shown to obey quantum limits on sensitivity. Finally, an ideal SIS mixer is shown to have noise properties identical to those of optical mixers based on ideal photodiodes. In possession of an apparently complete theory for SIS mixers, the third chapter presents a sampling of numerical results from that theory. Four different non-ideal tunnel diodes are used for these calculations so that a quantitative feel for the importance of diode quality can be achieved. The effects of dc and LO bias, signal and image source admittance, frequency of operation, and junction quality are all explored. This information will be useful for the proper engineering of SIS mixers. Finally, the fully optimized performance of the four tunnel diodes is presented as frequency is varied. It is shown that reasonably good quality lead-alloy SISs should behave like photodiodes up to frequencies as high as 1500 GHz. Finally, chapter 4 presents a prototype open-structure SIS mixer. Measurements in the laboratory show this mixer to be quite sensitive for signal frequencies from 115 to 761 GHz. Unlike all other SIS receivers, in which the diode is mounted across a waveguide, this mixer relies on the bowtie-on-quartz antenna structure, which has been investigated by D. B. Rutledge and his students. This difference is essential to the multi-octave spectral coverage of this mixer. It is probable that waveguide designs will never achieve good results above 500 GHz, and as of now, there are no SIS-waveguide mixers which operate well above 300 GHz. Tests at the Owens Valley Radio Observatory verify the suitablility of this mixer for radioastronomy, but these tests have been limited to frequencies of 260 GHz and lower.
A 600-700GHz SIS mixer with the twin-junction tuning circuit has been designed and fabricated [1] The surface impedance of thin-film superconducting microstrip lines, based on Mattis-Bardeen theory [2], is included in the optimization of RF impedance matching. The receiver noise temperature measured in the frequency range of 630-660GHz is below 200K and the lowest receiver noise temperature of 181K is achieved at 656GHz. The FTS response of the SIS mixer shows a good RF coupling from 600GHz to 700GHz. Both the noise performance and the FTS response can be quantitatively described by numerical results using the quantum theory of mixing. Some detail considerations on the mixer model calculation, such as spreading inductance around the junction tuning structure and mixer's embedding impedance, are discussed. Introduction Nb-based superconductor-insulator-superconductor (SIS) mixers have been used very successfully in sub-mm wavelength detection. Their receiver noise temperature has reached to three times the quantum limit, —3 hfrkB, below the junction's gap frequency. However, at high frequency bands, Nb SIS mixers need to be designed carefully because the photon energy is close to or higher than the gap energy of Nb, A-1.4meV. When the frequency band covers the gap frequency of Nb, —670GHz, the RF loss of Nb superconducting transmission lines increases dramatically and the surface impedance has strong frequency dependence. Usually, the RF properties of a superconducting transmission line can be described by the Mattis-Bardeen theory [2] in good accuracy. From results reported so far [4-9], the best receiver noise temperature is close to 5 hi7kB in the band of 600-700GHz. Despite of the input loss contributed by the experimental setup, some other properties of SIS mixers should be taken into account. In this paper, we characterize the performance of a 600-700GHz mixer by comparing the experimental and simulated results.